Jesebang BD86 True Wireless Stereo Earphones User Guide

Jesebang BD86 True Wireless Stereo Earphones

Product Information

The BD86 is a user-friendly and versatile device designed to meet your everyday needs. It offers a range of features and functions to enhance your experience.

Key Features

• Jesebang technology for improved performance
• Intuitive user interface for easy operation
• Multiple LR modes for different usage scenarios
• BD86 model with enhanced capabilities

Specifications

• Model: BD86
• Compatibility: Universal
• Power Source: AC adapter or battery
• Dimensions: [Insert dimensions]
• Weight: [Insert weight]

Product Usage Instructions

1. Ensure that the BD86 is connected to a power source or has sufficient battery charge.
2. Press the power button to turn on the device.
3. Use the Jesebang technology by selecting the desired mode from the LR options available.
4. Refer to the user interface for navigation and control of various functions.
5. Follow the specific instructions provided for each feature or function you wish to use.
6. To maximize performance, make sure to keep the BD86 clean and free from dust or debris.
7. When finished using the device, turn it off using the power button.
8. If required, disconnect the AC adapter or replace the battery.
   Note: Please refer to the complete user manual for detailed instructions on advanced features, troubleshooting, and maintenance.

Table of Product Contents

Product Specification

• Bluetooth Version 5.3
• Support HSP/HFP/A2DP/AVRCP
• Charging Port: Type·C
• Battery capacity: Earbud 25mAh
• Battery life : 5 hours of use μer full charge (actual.battt-iy life W!’rs with ,ang fypt’ IIIld volume requiremeou)
• Charging   time: 1 hour for eratbuds/1 hour for charging case
• Transmission range: 15 meters (without obtacles)

Introduction

How do I pair two headphones with my phone?

Please make sure both the earbuds and the charging case are fully charged before first use.

• Step 1

  • Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically (If the earbuds are not connected to your device for more than 5 minutes,the earbuds will automatically turn off
  • Press the MFB button for about 3 seconds to manually turn on the earbuds when prompted “Power on”.)
  • The indicator light of one earbud will flash red and blue alternately, and the indicator light of the other earbud will slowly flash blue when paired successfully.

• Step 2
  Enable the Bluetooth pairing mode on your phone device, search and select “BD86” to connect. (You should hear a voice prompt “connected” when wearing earbuds).

• If indicator light of earbud is off,it means the phone is connected

• Automatic connection
  By default, the earbuds will connect the last paired mobile automati-cally when power on.

• Prompt

1. If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps.
2. These earbuds can be used not only together, but also individually
  * If you want to use single earbud
  * Just take one earbud out of the case and connect it to your phone. or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other one earbud alone.

Functions

• Telephone Communication
  • Answer call: Tap once
  • Hang up: Press and hold the key for 2s
  • Refuse incoming call: Press and hold the key for 2s
• For Music
  • Play/pause Tap twice
  • Previous track Press and hold “L” for 2s
  • Next track Press and hold “R” for 2s
  • Activate Siri Quick tap for three times
  • Turn down volume Single tap on left earbud
  • Turn up volume Single tap on right earbud

Charging

• Earbuds Charging
  • The earbuds will only be charged when you correctly place them in the charging slots and close the lid. (You can charge the charging case and the earbuds at the same time, or you can charge the charging case first and then the earbuds.)
  • The charging case will stop charging automatically and the indicator light on earbuds will go out when fully charged.
  • When the earbuds are charging in the charging case, the digital display bar of the case will keep blink and turn off after 60 seconds.
• Case Charging
  • There is a Type-C usb charging cable in the package, please use it to charge the case directly.
  • During charging, the digital display will flash and display the battery level in real time. When fully charged, the number shows 100.

Charging Alerts

• After using it for a long period of time, due to the oxidation of the magnet connector, the earbuds might not be charged or even turned on.
  You can fix this problem by cleaning the magnet connectors on the earbuds and charging case with an alcohol wipe

• Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to charging automati- cally.
  The earbuds will connect the last paired mobile automatically.

Storage and Maintenance

• If the earbuds have not been used for more than 3 months, we recommend that you charge it.
• Please use an charger approved by FCC FCC: (Federal Communications Commission).
• Do not dissemble the earbuds.
• Children aged 12 and under require adult supervision.
• Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
• Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.

Frequently Asked Questions

• Why don’t these earbuds pair with my phone?
  • Make sure the earbuds are fully charged and powered on.
  • Make sure your phone’s Bluetooth is enabled
  • If there is no problem with the two points stated above, turn off the powered on earbuds after 5 continuous and quick clicks.
  • Put them back into the charging case and close the lip, wait for 1 minute, then open the charging case and reconnect the earbuds to the phone.
• Why does the music cut in or out?
  First, keep the earbuds no more than 49 feet away from your phone (no obstacles). If the distance is less than 49 feet, follow these steps:

1. Put the earbuds back into the case and close the lid, manual- ly click “forget the BD86” on your phone
2. After 10 seconds, open the charging case and reconnect these earbuds with your phone

• Why the earbuds still won’t be charged or disconnect from the phone after I put them in the case and close the lid?
  • Make sure the charging case is not in a low battery state.
  • If the charging case is in a low battery state, the earbuds will neither be charged nor disconnected.
  • In this case, please use a type-c charging cable to fully charge the case.

Activation & Warranty

• Permanent replacement of damaged, defective,
• Please activate via email below within 15 days. “yefan1357@gmail.com“

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>