KLARSTEIN 10033566 Suckling Pig BBQ Grill Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
www.klarstein.com
SAUENLAND PRO
Suckling Pig BBQ Grill
10033566
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damage. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10033566 |
---|---|
Power supply | 220-240 V ~ 50/60 Hz |
SAFETY INSTRUCTIONS
WARNING
The danger of suffocation! The fireplace is only intended for use in the Free
determined. It must not be used in buildings, garages, or other enclosed
areas. Toxic fumes may form, causing suffocation.
- The grill should always be used with caution.
- Do not touch the grill while it is hot.
- Do not move the grill while it is hot.
- Do not use methylated spirits or petrol to ignite the fire.
- Keep children away from the fi re.
- Only use the grill outdoors.
- Never expose the engine to moisture.
- The cable should be checked regularly for damage. Do not use the engine if the cable is damaged.
- Always use tools and heat-resistant gloves when adding fuel or moving the grille.
- Do not leave the grill unattended during use.
- Hot embers may fall from the grill during use.
- Do not overload the grill with fuel. Do not add new fuel until the fire has burned down.
- Do not inhale the smoke and do not let it enter your eyes.
- Inspect the grill for damage before use.
CAUTION
Risk of burns! It becomes hot during use. To avoid burns, do not attempt to
move the grill, wear protective gloves, and do not touch hot surfaces.
-
The use of accessories not recommended by the manufacturer may result in personal injury.
-
Do not place the grill on or near a hot gas or electric burner.
-
Ensure that the mains plug is always freely accessible so that it can be quickly removed from the socket in an emergency.
-
Only use extension cords that are approved for outdoor use.
-
If the power cord or plug is damaged, it must be replaced by the manufacturer, an authorized service center, or a similarly qualified person.
| CAUTION!
DO NOT USE SPIRIT OR PETROL FOR LIGHTING OR RE-LIGHTING!
---|---
PRODUCT OVERVIEW ****
1. Wind deflector | 13. U-bolt |
---|---|
2. L-screw | 14. Meat clip |
3. Stainless steel fork | 15. M8 Mains |
4. Engine | 16. Skewer |
5. Cooking grid | 17. Grill body |
6. Charcoal rust | 18. Support bracket |
7. Engine mount | 19. M8*40 Hexagon head screw |
8. Leg | 20. M8 wing nut |
9. Wheels without a brake | 21. M10*40 Hexagon head screw |
10. M5 nut | 22. M10 screw flat |
11. M5*10 Hexagon head screw | 23. M10 Mains |
12. Wind deflector | 24. Wheels with brake |
ASSEMBLY
For the assembly you need:
- M5 Hexagon socket wrench
- M10 Hexagon socket wrench
- Open-end wrench
1.
Attach the wheels without brake and the brake wheels to the leg.
Fix the leg to the grill housing with hexagon head screws M1040.
Fasten the adjustable rod with M840 screws.
Fasten the motor bracket and the mounting bracket to the top of the leg.
2.
Attach the motor to the motor bracket.
If necessary, place the grills on top of the grill.
3.| 4.
---|---
Fix the spit.| Attach the draft shield.
OPERATION
CAUTION
Risk of injury! : To be operated by an adult. Any children in the vicinity of
the BBQ must be supervised at all times. The BBQ is very hot during operation
and will cause burns if touched.
- Remove the grills.
- Load the charcoal tray with heat beads and ignite with firelighters.
- Refi t the grills.
- Once the meat has been prepared, place it centrally on the Rotisserie Skewer. Placing the meat exactly in the center of the skewer will reduce the strain on the motor.
- If cooking a whole roast fi x to tail clamp and leg clamps and lock onto the skewer. Insert the Meat spike onto the skewer and into the roast. When the whole roast is secure, lock the meat spike to the skewer.
- If cooking meat/s, insert the meat spikes on both ends of the meat and lock the Meat Spikes onto the Skewer.
- Insert Skewer into Rotisserie Motor and place Skewer on the support as the other end.
- Plug the power cord into a 10 A power outlet and switch on the Rotisserie Motor. If necessary, add more coals by lifting the grills with the tool supplied When finished cooking, carefully remove the Rotisseries Skewer with oven mitts or heat-proof gloves.
HINTS ON DISPOSAL
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom
References
- Klarstein | Your home. Your kitchen. Your style.
- Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>