milwaukee M12 SL LED Stick Light User Manual
- June 5, 2024
- Milwaukee
Table of Contents
milwaukee M12 SL LED Stick Light
TECHNICAL DATA
- Lighting time with one fully charged battery (1.5 Ah): 4-6 h
- Battery voltage: 12 V
- Weight according to EPTA-Procedure 01/2003: 429 g
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, f re and/or serious
injury.
Save all warnings and instructions for future reference. and away from
moisture.
SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the product. Do not
dispose of used battery packs in the household refuse or by burning them.
Milwaukee Distributors offer to retrieve old batteries to protect our
environment. Do not store the battery pack together with metal objects (short
circuit risk). Use only compatible Milwaukee chargers from the same battery
platform for charging battery packs. Do not use battery packs from other
systems. Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water. In case
of eye contact rinse thoroughly for at least 10 minutes and immediately seek
medical attention. Warning: Do not direct the light beam at persons or animals
and do not stare into the light beam yourself (not even from a distance).
Staring into the light beam may result in serious injury or vision loss. Don‘t
use the product in wet areas .
SPECIFIED CONDITIONS OF USE
The stick light is intended to be used as a light source away from the mains supply. Do not use the product in any way other than stated for normal use.
BATTERIES
Battery packs which have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum lifetime, the battery packs have to be fully charged, after use. To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged. For battery pack storage longer than 30 days:
- Store the battery pack where the temperature is below 27°C and away from moisture
- Store the battery packs in a 30% – 50% charged condition
- Every six months of storage, charge the battery pack as normal.
MAINTENANCE
Do not disassemble the worklight. The LED light cannot be replaced. Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents. If needed, an exploded view of the tool can be ordered. Please state the article no. as well as the machine type printed on the label, and order the drawing at your local service agents.
SYMBOLS
- Please read the instructions carefully before starting the product.
- CAUTION: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye.
- Do not dispose of electric tools together with household waste material. Electric tools and electronic equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>