GYS 059146 Triple Head LED Lamp With Tripod (230V) User Manual

GYS 059146 Triple Head LED Lamp With Tripod (230V) User Manual

IMPORTANT SAFEGUARDS

Before you use this product for the first time, please read all instructions carefully, even if you are quite familiar with the product. Please retain these instructions in a safe place for future reference. In order to reduce the risk of fire, electric shock, and/or personal injury, basic safety precautions should always be followed. These include:

• A damaged plug or power cord can lead to a deadly electric shock. Do not use this product if it appears to be damaged.
• Do not look directly into the light source or point it into the eyes of others. This can lead to retinal damage.
• Disconnect the worklight from the mains when the lamp is no longer in use.
• Cease to use the worklight immediately if it begins to visibly smoke or give off unusual smells.
• Do not throw the plug into fire and do not expose it to extreme heat. The plug could explode or burst.
• Do not attempt to alter or manipulate the worklight in any way. Doing this increases the exposure to danger significantly.
• Do not allow this device to be used as a toy. Close attention is necessary when used nearby children.
• Do not use with a damaged cord or plug.
• Do not handle power cord, plug or device with wet hands.
• Always keep the work light away from any flammable materials.
• Do not operate the work light if it has a missing or damaged lens cover. Contact customer service for a replacement. Read and follow all safety  rules and operating instructions before first use of this product.
• Do not unplug plug from the socket outlet by pulling on attached cord set. Switch OFF the socket outlet where possible, firmly hold plug and pull to disconnect. Always keep attached cable away from sharp edges in use or when removing.
• The use of an extension cord is not recommended.
• Do not use with a damaged plug or power cord, or where worklight itself has malfunctioned or been damaged in any manner.
• Do not allow children to play with the packaging materials.

If the power cord is damaged, the power cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This product has not been designed for any uses other than those specified in this booklet.

FEATURES OF YOUR THREE BLADES WORKLIGHT WITH TRIPOD

Tripod Leg Extension
To extend the Tripod legs, pivot the Tripod Leg Lock Release Button (DD) and pull the Collar Assembly (EE) down until the legs locks in place at the bottom of Tripod stand.

To return the legs to the folded position for storage, pivot the Tripod Leg Lock Release Button (DD) and pull the Collar Assembly (EE) back up to top.

Tripod Height Adjustable
The Tripod height can be adjusted by releasing the Height Extension Lock (H) and extending the tripod to the desired height, then locking the Height Extension Locks.

SWITCHING THE WORKLIGHT ON AND OFF

Never use a damaged product.
By continuous pressing of the ON/OFF switch, the worklight can be set to perform the following functions (in order): On, Off.

AREA OF USE AND PERFORMANCE CHARACTERISTICS

The worklight is a practical aid for working on vehicles or around the house.
The basic characteristics are:

1. High luminous efficiency and low energy consumption with LED technology
2. Wide-ranging lighting with 165 powerful LEDs
3. Selectable precision lighting
4. Long lighting times and durability

TECHNICAL DATA

1. Product dimension: Approx 5951142.5 cm
2. Product weight: Approx 2.68 kgs
3. Protection class: IP44

CARE AND MAINTENANCE

1. Switch the device off and disconnect the plug from the socket before cleaning.
2. Clean the product with a soft, dry cloth. Do not use any form of abrasive cleaner or solvents to clean the unit. Never dip the worklight into liquids for a long time, cause it is only IP44..
3. Store the worklight in a clean, dry and dark place. Do not expose the worklight to temperatures of under -15ºC for longer period of time.

Caution: Never use a damaged product (e.g., worn cable, cracked casing).

DISPOSAL

Do not dispose of packaging or the product through your household waste! The product and packaging are made from recyclable materials (plastics, metals, paper).

If the product is no longer suitable for use, dispose of it in an environmentally friendly manner in accordance with your local council.

Please contact your local authority for more information.

WARRANTY

The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).

The warranty does not cover:

• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).

In case of failure, return the unit to your distributor together with:

• * The proof of purchase (receipt etc …)

  • A description of the fault reported.

PICTOGRAMS

| The device complies with European Directive. The certificate of compliance is available on our website.
---|---
| Equipment in compliance with British requirements. The British Declaration of Conformity is available on our website.
| Equipment in conformity with Moroccan standards. The declaration of conformity is available on our website (see cover page).
| Waste Electrical and Electronic Equipment, separate waste collection required, Do not throw in a domestic bin.
| Recyclable product that falls within waste sorting recommendations (according to Decree n° 2014-1577).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>