KLARSTEIN Window Seal Installation Guide
- June 5, 2024
- Klarstein
Table of Contents
KLARSTEIN Window Seal Installation
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damage. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
FIXING THE WINDOW SEAL
Fixing the seal for side-opening windows and roof windows
The installation of the window seal is simple. You can attach the seal to a
tilted window, a side-opened window or a roof window. We have chosen a side-
opened window for demonstration purposes. It is particularly suitable because
the exhaust hose can be attached to the side far down. The Velcro tape is
attached to the three open sides. The side where the window is against the
frame is left out. Clean and dry the window frame beforehand so that the tape
adheres.
| 1 | 2 | 3 |
|---|---|---|
Attach the Velcro tape on the left, on the top and on the bottom of the window frame.
We recommend that you cut the tape into strips for each window side first.
| Now attach the Velcro tape to the inner window sides.| Stick the window sealing to the Velcro strips on the window frame first (starting with the top), then on the Velcro strips on the window.
Push the exhaust air tube of the air conditioner through
the hole, which can be adjusted in height and
size.
Manufacturer
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Deutschland (Germany).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>