KLARSTEIN BORNHOLM SINGLE SMART Convection Heater User Manual

KLARSTEIN BORNHOLM SINGLE SMART Convection Heater User Manual

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

PRODUCT DATA SHEET

only
Nominal heat output| Pnom| 1.0| kW|  | manual heat charge control, with integrated thermostat| No
Minimum heat output| Pmin| 0.5| kW|  | manual heat charge control with room and/or

outdoor temperature feedback

| No
Maximum continuous heat

output

| Pmax,c| 1.0| kW|  | electronic heat charge control with room and/

or outdoor temperature feedback

| No
Auxiliary electricity consumption|  | fan assisted heat output| No
At nominal heat output| elmax| 0.956| kW|  | Type of heat output/room temperature control (select one)
At minimum heat output| elmin| 0.486| kW|  | single stage heat output and no room temperature control| No
In standby mode| elSB| 0.37| W|  | Two or more manual stages, no room temperature control| No
 |  | with mechanic thermostat room temperature control| No
 | with electronic room temperature control| No
 | electronic room temperature control plus day timer| Yes
 | electronic room temperature control plus week timer| No
 | Other control options (multiple selections possible)
 | room temperature control, with presence detection| No
 | room temperature control, with open window detection| Yes
 | with distance control option| No
 | with adaptive start control| No
 | with working time limitation| No
 | with black bulb sensor| No
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany|

SAFETY INSTRUCTIONS

• Before use, check the voltage specified on the rating plate and only connect the
  appliance to sockets that match the voltage of the appliance.

• If the power cord is damaged, have it replaced by a trained professional.

• Do not place the heater directly under a power socket.

• Keep a distance of one metre from any inflammable materials such as furniture, curtains or similar.

• The purpose of the housing covers of this appliance is to prevent direct access to the heating elements and they must be in place when the appliance is switched on.

• Do not cover the heater to prevent it from overheating.

• Do not obstruct the air flow at the air inlet or outlet in any way, as the appliance may overheat and become a fire hazard. Do not cover the air inlets or outlets.

• The most common reason for overheating is the build-up of dust and lint on the appliance. Ensure that these deposits are removed regularly. Switch off the appliance, disconnect the power cord and vacuum the air inlets and outlets with a vacuum cleaner.

• Do not use the appliance to dry laundry.

• Do not connect the appliance to the power supply until it is fully assembled and installed.

• The appliance must only be operated in an upright position.

• This appliance is not suitable for use on long hair carpets or float rugs.

• The use of an extension cord is not recommended with this appliance.

• Before moving the appliance, switch it off and allow it to cool down.

• Unplug the power cord from the wall socket when the appliance is not in use. Never pull on the power cord when doing this, always grasp the plug. Always switch off the appliance before disconnecting the power cord from the power socket.

• Do not insert any foreign objects or metal objects inside the appliance or into the ventilation slots as this may result in electric shock, fire or damage to the appliance.

• The appliance is intended for use in the home and similar environments only. It is not intended for commercial use.

• Do not use the appliance if the power cord or plug is damaged, malfunctions, has been dropped or damaged in any way.

• Repairs may only be carried out by trained specialists.

• Incorrectly or independently performed repairs pose a risk of injury.

• Do not lay the power cord under carpets, rugs or floor coverings.

• Lay out the power cord clear of walking areas so that no one trips over it

• Make sure that the power cord does not run over sharp edges or come into contact with hot surfaces.

• Do not twist, bend or wrap the power cord around the appliance as this will cause the cord insulation to weaken and break. Always make sure that the entire power cord is unwound from the cord winder.

• Do not use the appliance with an external timer, a remote-controlled socket or any other device that automatically switches the heating on and off.

• Do not immerse the appliance or the power cord in water or other liquids and do not allow moisture to enter the interior of the appliance.

• Do not reach for an appliance that is immersed in water. Switch off the electricity in the household and immediately disconnect the power cord from the wall socket.

• This appliance has IP24 protection against splashing water and is therefore suitable for use in bathrooms and damp rooms. However, do not use the appliance in the immediate vicinity of a bathtub, shower, swimming pool or other liquids and ensure that no live parts can come into contact with water.

• Do not use the device outdoors. Do not place the device on a wet surface.

• Do not use the device with wet hands.

• Do not place the device near a heat source. Do not use the appliance on or near
  hot surfaces

• Do not operate the appliance in an environment where petrol, paint or other
  flammable substances are stored.

• Before cleaning, unplug the appliance from the wall outlet and allow it to cool
  completely.

• Do not use abrasive cleaners for cleaning.

• Do not store the appliance while it is still warm.

• Only use accessories that are expressly approved for this purpose by the manufacturer.

• Use the appliance out of the reach of children. Children may only operate the device under supervision.

• The protective grille does not provide complete protection for small children and fragile individuals.

• This device may only be used by children from the age of 8 and up or by persons with reduced physical, sensory and mental capabilities or a lack of experience and / or knowledge if they are supervised or have been instructed in the safe use of the device and have understood the resulting dangers.

• Cleaning and user maintenance should not be done by children unless they are 8 years of age or older and are supervised.

• Children must not play with the device.

CAUTION
Risk of burns! Some parts of the appliance can become very hot. Be careful not to burn yourself or your children with it.

PRODUCT OVERVIEW

INSTALLATION

Free-standing assembly with rollers

• Assemble rollers
  
  When assembly is complete you will hear a clicking sound

• Removing rollers
  
  Press the button to remove the rolls

Wall installation

**Detaching from the wall

**

Pull up the heater 5 mm and then move 10 mm to the left to detach the heater

CONTROL PANEL AND REMOTE CONTROL

failed: off
7| Display: high heating level

OPERATION

Commissioning

1. Carefully remove the appliance from the box. Save the carton for storage during the off-season.
2. Make sure that the on/off button is switched off before connecting the appliance.
3. The heater must be fully assembled and mounted according to the assembly instructions.
4. It is better not to use the same electrical connection with other power-hungry appliances to avoid overloading the circuit.

Switch on

Connect the appliance to a power supply. The operating light turns on after a short humming sound. Switch on the appliance with the on/off button (4). The current room temperature now lights up in the display. The factory preset temperature is 35 °C.

Setting the temperature

Press the settings button (1). The numbers “10” and “9” will start flashing. Then press the arrow keys (2) and (3) to increase or decrease the temperature by 1 °C.

Setting the timer

Switch-on time: When the appliance is switched off, press the button (1) twice to set the timer to 1-24 hours. Press buttons (2) and (3) to set the temperature. After the settings have been made, the ambient temperature is displayed. The indicator (8) lights up when the timer is running and switches off when the timer has expired.

Switch-off time: In heating mode, press the button (1) to set the timer to 1-24 hours.

After the settings have been made, the ambient temperature is displayed. The indicator (8) lights up when the timer is running and switches off when the timer has expired. Then the appliance stops the heating operation.

Setting the heating level

1. In operating mode, the button (2) switches between a high heating level (HIGH) and a heating stop (OFF). The indicator (7) lights up when the heating level is high and switches off when the heating is OFF.
2. In operating mode, button (3) switches between a low heating level (LOW) and a heating stop (OFF). The indicator (6) lights up at a low heating level and switches off when heating is switched off.
3. In operating mode, the button (12) switches between a low heating level (LOW), a high heating level (HIGH) and a heating stop (OFF). At a high heating level the indicator (7) lights up, at a low heating level the indicator (6) lights up.

Child safety lock

In heating mode, press the buttons (2) and (3) simultaneously. The child lock is now active and the system is locked. No settings can be made. After 5 seconds the display will show the ambient temperature.
To unlock, keep buttons (2) and (3) pressed for 3 seconds.

Activating the display

When the appliance is in operation, the display is switched off. Pressing the control panel activates the display.

ECO function (night mode)

In heating mode, press and hold buttons (1) and (2) for 3 seconds (or the ECO button on the remote control) to switch on the ECO function. In this operating mode, only the indicators (5), (6), (7) or (8) are displayed, depending on the previously selected setting.

Display temperature changes in Celsius or Fahrenheit.

Press and hold the settings button (1) and the up arrow button (2) simultaneously for 10 seconds.

Open window detection function

If the temperature drops by 3 °C or more within 2 minutes, the open window detection function is triggered. The appliance will stop heating and the indicator (9) will flash.

Press the button (4) to switch off the appliance. If you then switch on the appliance again, the open window detection function is deactivated.

Resetting the Wi-Fi

Press and hold the button (1) for 3 seconds in heating mode The Wi-Fi settings are reset and the corresponding indicator flashes quickly (twice per second).

Switch off

Press and hold the On/Off button (4). The operating lamp lights up.

DEVICE CONTROL BY SMARTPHONE

If you integrate the device into your home WiFi, you can conveniently operate it via the associated Klarstein app. The app not only allows you to remotely control the device via your smartphone, but also gives you access to recipes and additional information.

Follow these steps to connect your smartphone to your Klarstein device:

1. Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
2. Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
3. Open the Klarstein app.
4. Sign in to your account. If you do not have an account, sign up in the Klarstein app.
5. Follow the instructions from the app

App Download

Use the scan function of your smartphone to scan the QR code and save the app on your smartphone.

Note: The app provides further information on how to use the app and help on how to connect to your device as soon as you open it for the first time.

iOS

Troubleshooting connection problems

If your Klarstein device cannot be found in the WLAN, check the following:

• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions in the app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity during the connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless router, activate it in your router settings.

Note: For further help, follow the instructions in the app when setting up the connection.

CLEANING AND CARE

Note: Switch off the appliance and remove the plug from the socket. Wait until the appliance has cooled down completely before cleaning it.

• Use a vacuum cleaner to clean the ventilation slots and grilles.
• Remove dust from the exterior surfaces with a damp (not wet) cloth.
• Do not use harsh cleaning agents or abrasive cleaners.
• Do not spray or immerse the device in water or any other liquid.
• Never open the heater housing.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fello human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

This product contains batteries. If there is a legal regulation forthe disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:
Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom

Hereby, Chal-Tec GmbH declares that the radio equipment type Bornholm Single Smart is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: use.berlin/10035235

For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Bornholm Single Smart is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use.berlin/10035235

References

• Klarstein | Your home. Your kitchen. Your style.
• Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>