AVANTCO QS-1800 Countertop Tortilla/Portion Steamer User Manual
- June 5, 2024
- AVANTCO
Table of Contents
- AVANTCO QS-1800 Countertop Tortilla/Portion Steamer
- Specifications
- Important Safety Information
- Identification of Key Parts
- Installation of Your Steamer
- Before Using Your Steamer
- Using Your Steamer
- Typical Operation Sequence
- Cleaning & Maintaining Your Steamer
- Parts List
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AVANTCO QS-1800 Countertop Tortilla/Portion Steamer
Specifications
Model # | Power Supply | Dimensions | Size | Plug |
---|---|---|---|---|
177QS1800 | 120V 1800W | 16 ½”W x 15”D x 7 7/8”H | Half 120V | NEMA 5-15P |
Important Safety Information
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions carefully and completely.
- Electrical appliances are for commercial use only.
- Do not touch hot surfaces.
- Plug into a 3-hole grounded electrical connection only.
- Protect against electrical shock by keeping all cords, plugs, and other electrical components away from water or other liquids.
- Unplug this unit when not in use and before cleaning.
- Allow the unit to cool before putting on or taking off parts.
- Do not operate this or any appliance with a damaged electrical cord or plug.
- Do not operate this or any appliance after it has malfunctioned or been damaged in any way.
- Do not use outdoors.
- Do not place on or near a hot gas or electric burner.
- Attach plug to appliance first, then plug electrical cord into the wall outlet.
- Disconnect the unit by turning the temperature and timer control to “OFF”, then removing the electrical plug from the wall outlet.
- Do not use appliance for any application other than intended use.
- Do not insert metal utensils or oversized foods into this unit as they may cause a fire and heighten the risk of electrical shock.
- Do not store any item on top of this unit when in operation.
- Do not allow this steamer to touch or be covered by flammable material, such as curtains, draperies, walls, etc., when in operation.
- Do not clean with metal scouring pads as pieces can break off and touch electrical components, heightening the risk of electrical shock.
- Never place materials such as paper, cardboard, plastic, etc. in this steamer.
- Incorrect installation, adjustments, modifications, and/or improper maintenance may result in injury or property damage. All repairs should be completed by authorized professionals only.
- Turn the appliance off by turning the temperature and timer control to the “OFF” position.
- Note that the use of accessories not recommended by the manufacturer may result in injury.
- Children should be supervised to ensure that they do not play with the steamer.
- Keep animals away from the unit.
- This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- When using the appliance in shops, snack bars, hotels etc., check the voltage and outlet to make sure the appliance is correctly connected to power.
- Place unit on a flat, dry surface that is well ventilated. The appliances must be supervised during operation; DO NOT leave appliance without powering off.
NOTE: Save these instructions for future reference.
Identification of Key Parts
NO | PART NAME |
---|---|
1 | Handle |
2 | Main Body |
3 | Cover |
4 | Rear Connecting Plate |
5 | Tank Cover |
6 | Steam Injection Button |
7 | Power Switch |
8 | Control Panel |
Installation of Your Steamer
- QuickShot QS-1800 is 120V, 1800W and uses a 5-15P NEMA plug.
- All electrical connections must comply with specifications and power standards. The installation must be done by qualified personnel.
- All models are countertop type. Remove all exterior and interior packing materials, and place the steamer on a flat surface.
- Place near an appropriate electrical outlet. Extension cords are not recommended.
- Install legs onto unit.
Before Using Your Steamer
Before steaming anything in your steamer for the first time, please follow these simple instructions:
-
Using a small amount of detergent, thoroughly wash the steamer.
NOTE: Do not use a spray or abrasive polishing agent. -
Gently wipe down the interior walls with a damp cloth.
Using Your Steamer
- Plug unit into a grounded outlet.
- Open tank cover. Ensure filter is properly installed inside.
- Fill unit with approximately 3 qt. of distilled water. To reduce calcium/mineral build-up, it is recommended to use distilled water. Do not overfill or use tap water.
- Flip the on/off switch to the ‘on’ position. Allow the unit to preheat for 25 minutes.
- Open top cover, and load product into the basket or half-size perforated food pan. Close top cover.
- Press steam button for 2 seconds. Release, and wait 20 seconds for steam to penetrate the product. Repeat as needed. Avoid pressing and holding the steam button for longer than 2 seconds, as it often floods out and hinders proper steaming.
- Remove hot product from steamer.
- Flip the on/off switch to the ‘off’ position.
Typical Operation Sequence
ACTION | RESULT |
---|---|
Plug in your steamer | Power is connected; unit will begin to heat |
Load product into steamer | Product is ready to steam |
Press steam button for 2 seconds, release, and wait 20 seconds | Unit fills |
body with steam, which penetrates the product
Unload steamer| Product will be hot; use caution removing it
Cleaning & Maintaining Your Steamer
Daily cleaning is recommended for maximum service life. Do not immerse steamer in water or other liquid; it may cause the electrical components to short circuit or to produce an electrical shock.
Daily Maintenance
-
Pour 1 Cup of White Vinegar into the tank
-
Cycle the steamer by pressing the steam button for 3-5 seconds, and wait 20 seconds between presses
-
After vinegar is cycled through, pour 1 Cup of Distilled Water into the tank, and continue to cycle until all vinegar is cleared from the internals of the steamer.
NOTE: White vinegar or similar solvent will help eliminate calcium and mineral build-up in the steamer. Without proper maintenance, the build-up will act as a thermal insulator leading to degraded performance and shortened lifespan. -
Flip on/off switch to the “off” position. Disconnect power cord from electrical outlet.
-
Let steamer cool for 45 minutes.
-
Use a sponge or damp cloth and hot soapy water to wipe down unit
-
Rinse with clean, damp cloth
-
Wipe dry
Weekly Maintenance
- Follow steps 1-8 above
- Open the steamer lid, remove pan and lift loose end of spray tube and pull it out of the generator hole
- Slide off metal spray tube cover and remove water tank filter from water tank
- Place the spray tube and water tank filter in a container and cover with white vinegar, let soak for 15 minutes
- Remove the spray tube and water tank filter to examine if calcium or mineral deposits remain, then use a paper clip to remove any remaining build-up and rinse using vinegar and water.
- Slide metal cover back onto the tube and replace water tank filter inside water tank
- Pour 1 Cup of white vinegar onto the generator surface and let soak for 15 minutes
- Rinse the generator surface and scrape off any remaining calcium or mineral build-up
- Wipe generator clean with a damp cloth and reassemble unit and spray tube
If excessive mineral deposits remain after cleaning, follow the directions below:
-
Treat generator surface with a delimer solution. Follow all instructions and safety precautions as stipulated by the delimer’s manufacturer. If using a chemical cleaner, make sure it is safe to use on the generator surface.
-
Remove delimer solution from generator with a sponge or dry towel. Rinse generator with clean water.
NOTE: Some calcium/mineral build-up is required on the generator surface for proper steaming. If all build-up is removed during cleaning, add distilled water to surface, and allow it to boil off. Repeat as needed until the generator surface is thinly coated in calcium/mineral deposits.
NOTE: It may be necessary to season the generator surface with lime if using soft water. Seasoning creates a thin coating of calcium/mineral deposits on the generator to ensure proper steaming.
To season, mix 3/4 oz. baking soda, 3/4 oz. lime, and 1 qt. water. Pour 1/4” deep onto hot generator surface. Allow the mixture to boil off. Remove any loose powder that remains. -
Plug power cord into electrical outlet.
-
Flip the on/off switch to the ‘on’ position. Allow steamer to preheat for 30 minutes.
-
Press and release steam button several times to purge delimer residue from generator.
-
Flip on/off switch to the ‘off’ position. Reinstall parts and accessories.
Parts List
NO | PART NAME |
---|---|
1 | Top Cover |
2 | Handle |
3 | Steam Plate |
4 | ½ GN Pan |
5 | Evaporation Plate |
6 | Shell |
7 | Control Panel |
8 | Bottom Plate |
9 | Humidity Inching (steam switch) |
10 | Power Switch |
11 | Feet |
12 | Transformer |
13 | Spout Connector |
14 | Relay Fixing Plate |
15 | Right Plate for Water Tank |
16 | Water Tank Cover Lock |
17 | Power Cord |
18 | Relay |
19 | Temperature Limiter |
20 | Wire Buckle |
21 | Ceramic Terminal |
22 | Pump |
23 | Power Control Board |
24 | Water Pipe Fixture |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>