CATERPILLAR 621-8167 Radio Box Instruction Manual

CATERPILLAR 621-8167 Radio Box

General

Power On/Off
Set your vehicle’s Key to the ACC or ON position
Power On: Press “ ”
Power Off: Press “ ”

Source Selection
Press [AM], [FM], [DAB], [AUX], [BT] or [USB] to change the source.

Volume Adjustment
(Setting range: 0 to 20, Default 10)
Touch the Volume indicator. Right direction to increase the volume, and Left direction to decrease the volume.

Radio Operation -AM/FM/DAB

Operation
Flow

1. Press [AM] or [FM] to select a band.
2. Select station
   Frequency Adjustment
   Touch the indicator. (Right side: Higher, Left side: Lower)

Preset Station Selection
Press the preset channel button from 1 to 7 to tune in a preset station

Station Preset
The 7 stations with good reception will be manually saved in the memory under preset 1 to 7. Preset stations can be simply called up by pressing 1 to 7.

Manual Preset Memory
1. Use tuning to find a station
2. Press and hold one of the preset button 1 through 7 on the screen by more than 2 seconds

USB/Bluetooth Music Operation

Operation Flow

1. Press [BT] or [USB] to select a band.
2. Connect the USB memory or iPOD to USB port.
3. When connect the USB memory or iPOD, the radio stream the sound automatically.
4. Folder Selection
   Touch the [Folder Select] and select the folder name.
   File Selection
   Touch the file name
   Pause
   Touch the white circle on the play time

Bluetooth – General

Operation Flow

1. Pairing
   Press the [Pairing] button to make this unit standby for pairing with waiting status.

2. Operate you Bluetooth device to input the PIN code for connection. (Default PIN code is “0000”)
   Once pairing is successful, the registered Bluetooth device can automatically communication with this unit.

Paired Devices
Press “Paired Devices” button to delete the registered device.

Note

• If registration is not successfully completed within 1 minute, “Time out” appears.
• If registration fails because of mismatched PIN code, “BT PIN Error” appears.
• Depending on the communication status, it may take 5 to 40 seconds for device connection.

Bluetooth – Hands Free Phone-

Phone Call
Select the [Phone] and select the [Call]. And select the phone number.

Phone Hanging Up

Press “ ” during a call.

Phone Answering/ Reject

Phone Answering
Press “ ” button during a call incoming.
The “Incoming Call” message blinks during a call incoming.

Phone Reject/Hanging Up
Press “ ” button when reject a call incoming or hang up a call.

AUX Operation

Operation Flow

1. Press [AUX]
2. Connect the Sound equipment via Stereo jack.
3. When connect the Sound equipment, the radio stream the sound automatically.

Specifications

General

• Power supply : 24 V DC (12V / 24V), test voltage 24V, negative ground
• Current consumption : Less than 3 A (during USB playback)
• Power Output : 15 W x 2 ch (DIST=10% x 2ch)
• Maximum power output : 30 W x 2 ch
• Compatible speaker impedance : 8 Ω
• Dimensions (W x H x D) : 175 x 50 x 121.5 mm
• Weight : 540 g

FM stereo radio

• Frequency range :
  North America 、 Latin America
  87.5~107.9 MHz (200 KHz/STEP) Japan
  76.0～108.0 MHz (100 KHz/STEP) Oceania
  87.5~108.0 MHz (100 KHz/STEP) Europe 、 Asia
  87.5~108.0 MHz (50 KHz/STEP)

• Usable sensitivity : 6 dB/μV

• Stereo separation : 35 dB (1 kHz)

• S/N ratio : 56dB

AM radio

• Frequency range :
  North America
  530～1710 kHz (10 KHz/STEP)
  Latin America
  530～1710 kHz (5 KHz/STEP)
  Japan 、 Europe 、 Asia 、 Oceania
  522～1629 kHz (9 KHz/STEP)

• Usable sensitivity : 33 dB/μV

USB

• USB standard
• compatibility: 1.1/2.0 Full speed
• File system: FAT12/16/32
• Power off maximum supply current for apple ipad: 2 A
• Playable audio format: MP3/WMA
• capacity/partition: Less than 32 GB/Only supported for 1 partition.

Bluetooth®

• Frequency: 2400 ~ 2483.5 MHz
• RF Transmit Power(Basic Rate): -6 ~ +4dBm
• Bluetooth® Version: Version 4.2

Operating temperature : -40℃~85℃

Dealer Name: ZEPPELIN BAUMASCHINEN GMBH
Physical Address:
Zeppelinstrasse 2
03099 Kolkwitz-Krieschow
Deutschland

Website: https://www.zeppelin.com/de-en/cat/

FCC Statement:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body.

ISED Statement:
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2. this device must accept any interference, including interference that may cause undesired operation of the device.

References

• Zeppelin Baumaschinen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>