PHOINIKAS Q5S Wireless Gaming Headset Instruction Manual

PHOINIKAS Q5S Wireless Gaming Headset

Product Description

1. Power/7.1 sound/LED Light
2. Status Indicator
3. Mic On/Off
4. Volume Adjustment Wheel
5. Charging Indicator
6. Type-C Interface
7. LINE-IN Interface
8. External Mic Interface

Product Details

Transmitter Details

Connection Mode of the Gaming Headset

ios/Appareil
Android/PlayStation 4/PlayStation 5/PS Vita/Xbox oneS/devices with 3.5 audio interface
Operation Method:| Plug in the USB transmitter, plug and play| Plug in the 3.5mm audio cable, plug and play
Steps (First Use)| PC Laptop| a) When using, insert the USB transmitter into the USB port of the computer, the blue indicator light of the transmitter flashes, and the“Q5” wireless headset device is displayed in the viewing device on the computer, indicating that the installation is successful;

b) After the transmitter is inserted into the computer, the Windows system of the computer will be automatically connected without requiring the user to install the driver and run the software separately;

c) When using the device for the first time, open the “Audio” of the “Sound and Audio Device Properties” of this device and s et it to default, turn off the PC “listening function” and click “Speaker” to adjust the volume.

| a) For PC, please use 3.5mm 1 point 2 adapter cable

b) For the first use, please set the “Audio” of “Sound and Audio Device Properties” on the computer as the default, turn off the PC “listening function” and click “Speaker” to adjust the volume.”Speaker” to adjust the volume.

PS4 PS5| a) Insert the USB transmitter into the game device, and the blue indicator light of the transmitter flashes to be connected;

b) Open PS4/PS5 settings–select “peripheral devices”–select “audio devices”–select “output to headphones”–select “automatically switch output devices”.

| a）Insert the 3.5mm audio cable into the game device;

b）Open PS4/PS5 settings–select “peripheral devices”–select “audio devices”–select “output to headphones”–select “automatically switch output devices”.

Notice:| ①In 2.4G wireless mode, the battery power is lower than 3.4V, the red light flashes quickly, and a “Battery low” prompt sound is issued.

②The transmitter does not need to be paired, it can be used synchronously with the headset when it is plugged in;

③ If the transmitter is lost or damaged, please contact the merchant to purchase the same type of transmitter from the original factory. The new transmitter needs to be re-paired with the earphone and connected with the operation steps “Refer to the first use steps” and then re-match.

| ① Please make sure that the audio cable is fully inserted into the gaming headset;

② Devices using Non-3.5mm interface require additional adapters;

Button Operation Instructions

• Power On: long press the power button for 5 seconds, the prompt sound “POWER ON”;
• Power Off: long press the power button for 5 seconds, the prompt sound “POWER OFF”;
• Pairing: Automatically search for pairing connection after power on

7.1 Sound| Click × 1 time| The prompt sound “Surround Sound On / Surround Sound Off”
Led Light On / Of| Click × 2 time| Turn on by default, click 2 times to turn on/of
| Mic On / Of| On / Of|

• Adjust Up : open the microphone
• Adjust Down : turn off the microphone

| Volume + / Volume –| Roll Adjustment|

• Scroll up (+): Volume +
• scroll down (-): volume

Q&A

1. Q: After connecting to the PC, the headset has sound, but the volume cannot be controlled?
   A: ①Open “Control” and click “Sound Audio Device”;
   ②Click on the headphone device in the “Play” panel of the sound setting, set it as the default value and confirm (the default headset is the sound from the headset, and the default sound is the sound from the audio);
   ③There is no sound after the operation, please restart the computer.

2. Q: In wireless mode, what should I do if the sound of the headset is distorted or stuck?
   A: ① Check the source of the sound；
   ② Disconnect other devices；
   ③Re-pair the wireless gaming headset.

3. Q：When playing multiple players on the PC, the stuck operation fails, but the headset functions normally?
   A: ① Check the playback decoder;
   ②Please close multiple players;
   ③Check whether there are obstacles between the headset and the PC, which will affect the signal transmission between them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>