nedis SPMT5721BK Sonos One SL Speaker Wall Mount Installation Guide
- June 5, 2024
- nedis
Table of Contents
nedis SPMT5721BK Sonos One SL Speaker Wall Mount Installation
Introduction
- Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls, or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury
Important
Ensure that you have received all parts according to the component checklist
prior to installation. If any parts are missing or faulty, contact your place
of
purchase for a replacement.
Maintenance
Check that the product is secure and safe to use at regular intervals (at least every three months).
Included
Setup
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>