Danby DAR044A1SSO-6 Compact Refrigerator Owner’s Manual

June 5, 2024
Danby

Danby DAR044A1SSO-6 Compact Refrigerator Owner’s Manual
Danby DAR044A1SSO-6 Compact Refrigerator

THE RECOMMENDED OPERATING AMBIENT TEMPERATURE IS FROM 7°C (45°F) TO 43°C (109°F) WHEN NOT IN DIRECT SUNLIGHT.

Welcome to the Danby family.

We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting, and maintenance tips to ensure the reliability and longevity of your appliance.

You are entitled to the warranty coverage as described in the owner’s manual provided with your new appliance.

  1. Please write down your appliance information below. You must keep the original proof of purchase receipt to validate and receive warranty services.
  2. Register your product online and receive a FREE 2 MONTH WARRANTY EXTENSION after filling out a product survey, at www.danby.com/support/product-registration/

Model Number: __
Serial Number: __
Date of Purchase:

Need Help?
  1. Read your Owner’s Manual for installation help, troubleshooting, and maintenance assistance.
  2. Visit www.Danby.com to access self-service tools, FAQs and much more by searching your model number in the search bar.
  3. For the Quickest Customer Service, please fi ll out the web form at www.danby.com/support. Your submission will go directly to an expert on your  particular appliance. Our average response times are between 20 minutes and 2 hours, during EST business hours.
  4. Call 1-800-263-2629 – please note that during peak hours, hold times can exceed one hour.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not puncture refrigerant tubing.

  • Do not use mechanical devices to defrost refrigerator.
  • Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.
  • If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard.
  • Consult repair manual or owner’s guide before attempting to service this product. All safety precautions must be followed.
  • Dispose of properly in accordance with federal or local regulations.
  • Follow handling instructions carefully.
  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
  • Suitable for camping use.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

CAUTION: Children should be supervised to ensure that they do not play with the appliance.

DANGER: Risk of child entrapment. Before throwing away an old appliance:

  • Remove the door or lid.
  • Leave shelves in place so that children may not easily climb inside.

DANGER: Do not add a lock to the door or lid. This can cause child entrapment and harm.

This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.

This appliance is intended to be used in household and similar applications such as:

  • Staff kitchen areas in shops, offi ces and other working environments;
  • Farm houses and by clients in hotels, motels and other residential type environments;
  • Bed and breakfast type environments;
  • Catering and similar non-retail applications.
GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.

This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.

WARNING – Improper use of the grounding plug can result in a risk of electric shock. Consult a qualifi ed electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord.

Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.

INSTALLATION INSTRUCTIONS

LOCATION
  • Two people should be used when moving the appliance.
  • Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm wet cloth.
  • Place the appliance on a floor that is strong enough to support it when it is fully loaded.
  • Prolonged exposure to extreme heat or direct sunlight may adversely affect the performance of this unit. Please check the interior temperature and contents of this unit if extreme heat or sunlight are present for extended periods.
  • This unit is suitable for outdoor use and is weather resistant. However, it is not waterproof. Do not use this unit near a swimming pool or hot tub.
  • Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
  • Allow 12.7 cm (5 inches) of space between the back, sides and top of the appliance and all adjacent walls.
  • This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter. Building in this appliance can cause it to malfunction.
  • Extreme cold will affect the performance and reliability of this unit. Do not use this in environments that are 7°C (45°F) or less.
DOOR HANDLE INSTALLATION

The door handle will ship inside the cabinet to avoid damage during shipping. It can be installed using the provided hex key and hexagon bolts found in the accessory bag.
DOOR HANDLE INSTALLATION

IMPORTANT
Ensure that the door is fully closed when the appliance is in operation. Failure to fully close the door can lead to excessive condensation and potential water damage to flooring under the appliance. Danby will not be responsible for damages from misuse.

LEVELING INSTRUCTIONS

There is an adjustable foot on the bottom of the appliance that can be turned up or down to ensure that the appliance is level.

  1. Turn the adjustable foot counter-clockwise until the top of the foot is touching the bottom of the chassis.
  2. Slowly turn the adjustable foot clockwise until the appliance is level.
CASTER INSTALLATION

To reduce the risk of personal injury or property damage, we recommend unplugging the appliance and using two people to complete the caster installation.

  1. Place the appliance on its back. Protect the floor and the back of the unit from damage by laying the appliance on a towel or blanket.

  2. Remove the three solid feet. Unscrew the adjustable foot. Keep the solid feet and adjustable foot for future use.

  3. Install the non-locking casters on the back of the appliance where the mounting holes are already pre-drilled and threaded.
    CASTER INSTALLATION

  4. Install the larger locking caster at the front of the appliance opposite the hinge.

  5. Remove the hinge plate installed on the appliance and replace it with the hinge plate provided in the caster box.

  6. Use the spanner provided in the caster box to install the smaller locking caster into the predrilled hole in the caster hinge plate.

  7. Once completed, allow the unit to stand upright for a minimum of 6 hours before plugging in to avoid damage to internal components.
    CASTER INSTALLATION

DIMENSIONS

This appliance has the following dimensions:

  • 52 cm (20.5”) wide without the handle
  • 52.7 cm (20.7”) wide with the handle.
  • 84.1 cm (33.1”) high with the regular feet
  • 89 cm (35.1”) with the casters
  • 52.4 cm (20.6”) deep without the handle
  • 58.2 cm (22.9”) deep with the handle

OPERATING INSTRUCTIONS

FEATURES
  1. Interior Light and Thermostat Dial: Temperature can be adjusted by turning the thermostat dial on the inner ceiling of the appliance.
  2. Glass Shelves
  3. Defrost Water Outlet: Ice that forms inside the appliance will automatically thaw and drain through this outlet.
  4. Crisper
  5. CANSTOR™ Door Liner: Holds 355ml cans of pop, juice, or beer.
  6. Bottle Rack: For tall, small and medium cans or jars.
  7. Magnetic Gasket: Tight fi tting door seal keeps all the cooling power locked inside.
  8. Adjustable Foot: Adjust so the unit is level.
  9. Lock (not pictured): To prevent a child from becoming trapped, keep keys out of reach of children and not near the appliance.
    Features
TEMPERATURE SELECTION

The temperature of the appliance can be adjusted by turning the thermostat dial.

The larger dots indicate the coldest setting.

The smaller dots indicate the warmest setting.

The “OFF” position will turn off the cooling function.

Internal temperature of the appliance can vary based on ambient temperature, the quantity of items stored and how frequently the door is opened.
TEMPERATURE SELECTION

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.

  1. Remove the hinge cover from the top right side of the cabinet. Remove the screw hole covers from the top left side of the cabinet.

  2. Remove the door spindle cover that covers the hinge hole on the top left side of the door. Remove the hole cover from the top right side of the door. Removing the hole cover may require a fl at bladed screwdriver.

  3. Remove the upper hinge and upper hinge gasket from the top right side of the cabinet. Remove the door from the cabinet.
    DOOR REVERSAL

  4. Move the stop block from the bottom right side of the door to the bottom left side of the door. Move the door handle to the right side of the door. Move the screw hole covers from the right side of the door to the left side of the door.
    DOOR REVERSAL

  5. Remove the adjustable foot and the lower hinge from the bottom right side of the cabinet. Remove the solid foot and screws from the bottom left side of the cabinet. Install the solid foot on the bottom right side of the cabinet. Install the lower hinge and adjustable foot on the lower left side of the cabinet.

  6. Remove the hinge pin from the upper hinge. Flip the hinge over and reinstall the hinge pin on the other side.

  7. Install the door onto the cabinet. Install the upper hinge and upper hinge gasket.
    DOOR REVERSAL

  8. Install the hole cover on the top left side of the door. Take the door spindle cover from the accessory bag and install it on the top right side of the door.

  9. Install the upper hinge cover on the top left side of the door. Install the screw hole covers on the top right side of the door.

Note: When reinstalling the door, ensure that the top of the door is level with the top of the cabinet and that the rubber gasket makes a good seal with the cabinet all the way around.

CARE & MAINTENANCE

CLEANING

Ensure the appliance is unplugged before cleaning.

  • To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or a mild soap solution or some mild detergent.
  • Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth.
  • Clean the outside with a soft, damp cloth and some mild detergent.
  • It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.

Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, take the proper steps to protect your contents.

Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.

DEFROST

This appliance is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.

VACATION
  • Short vacations: Leave the appliance operating during vacations of less than three weeks.
  • Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.
MOVING
  • Make sure the appliance is empty.
  • Secure the shelves with tape.
  • Secure the door with tape.
  • Turn the adjustable foot up to the base to avoid damage.
  • Protect the outside of the appliance with a blanket or similar item.
  • Be sure the appliance stays in the upright position during transportation.
  • If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.
DISPOSAL

This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government office.

FREQUENTLY ASKED QUESTIONS

  • What are the standard wattage and amps used?
    This information can be found on the rating plate located on the back of the cabinet.

  • How much does it cost to run the freezer?
    Please refer to the energy guide.

  • Can I use an extension cord?
    No, an extension cord may not be used.

  • I am having trouble opening the door; why?
    The refrigerator door may be diffi cult to open immediately after closing it. This is normal and is due to the pressure difference between the cold interior of the refrigerator and the warm air that has just entered the refrigerator when it was opened. The pressure will equalize within a few minutes.

  • I had my fridge on its side to bring it home. Do I have to let it sit? And for how long?
    Yes, please allow it to sit upright for 6 hours before plugging it in.

  • The refrigerator smells like new plastic. How do I make it go away?
    It is common for new appliances to have a slight plastic smell. Ensure that you have removed all packing material from the fridge. Clean the inside of the cabinet by following the cleaning instructions included in the owner’s manual. Once completed, place an open box of baking soda in the refrigerator to absorb any remaining odour.

  • How do I set the temperature?
    This varies based on model:

    • If your thermostat dial has a graduated blue line, the thinner part of the line indicates warmer temperatures and the thicker part of the line indicates colder temperatures
    • If your thermostat dial has dots, the smaller dots indicate warmer temperatures and the larger dots indicate colder temperatures
    • If your thermostat dial has numbers, the smaller numbers indicate warmer temperatures and the larger numbers indicate colder temperatures

TROUBLESHOOTING

No power

  • A fuse may be blown or the circuit breaker tripped
  • Plug not fully inserted into the wall outlet

Internal temperature not cold enough

  • Temperature setting is too warm
  • The door is not shut properly or opened excessively
  • Recently added a large quantity of warm food to the cabinet
  • Close proximity to heat source or direct sunlight
  • Ambient temperature or humidity is very high

Refrigerator runs continuously

  • Temperature setting is too cold
  • The door is not shut properly or opened excessively
  • Recently added a large quantity of warm food to the cabinet
  • Close proximity to heat source or direct sunlight
  • Ambient temperature or humidity is very high

Refrigerator makes a gurgling noise when operating

  • This noise is completely normal. The refrigerant inside the appliance will make a gurgling noise as it changes from a liquid to a gas and back again.

LIMITED “CARRY IN” WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non- transferable.

TERMS OF WARRANTY

Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.

First 24 months
During the first twenty four (24) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s option, at no charge to the original purchaser.

To obtain service
Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than an authorized service depot, all obligations of Danby under this warranty shall be void.

It is the responsibility of the purchaser to transport the appliance to the nearest authorized service depot.

Transportation charges to and from the service location are not protected by this warranty and are the responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

  1. Power failure.
  2. Damage in transit or when moving the appliance.
  3. Improper power supply such as low voltage, defective house wiring or inadequate fuses.
  4. Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (ie. extremely high or low room temperature).
  5. Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
  6. Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
  7. Service calls resulting in customer education.
  8. Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to: garages, patios, porches or anywhere that is not properly insulated or climate controlled).

Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present the proof of purchase to our authorized service depot.

Warranty Service
Carry In

Contact Us

Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: 519-837-0920 FAX: 519-837-0449

1-800-263-2629
04/17

Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: 419-425-8627 FAX: 419-425-8629

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals