Best Buy C-L12U Level Touch Edition Bluetooth Smart Lock Satin Nickel User Manual
- June 5, 2024
- BEST BUY
Table of Contents
User Manual
Support 7 days a week. Visit
www.level.co/support for additional help.
2-year limited warranty. Visit
www.level.co/warranty for more information.
Visit www.level.co/install for more information and tips on installing your Level Touch.
What you need:
- Phillips Screwdriver
- Compatible iOS® or Android Device™
Test your deadbolt.
Make sure your current deadbolt throws smoothly without pushing or pulling the door.
Disassemble your lock.
Unscrew your existing lock housing, deadbolt, and strike plate.
Install your Level Touch and strike plate.
A. Insert the included bolt into your door with the word TOP facing up. Look
through the borehole— if you can see the end of the bolt sticking out, you’re
good to go to step C.
B. If you can’t, simply take it out of your door and use a screwdriver to
extend the bolt.
Ensure the bolt snaps into place and put it back in your door, with the word
TOP facing up.
C. Fasten the bolt with the provided bolt plate screws.
D. Slide on the motor and make absolutely sure to tighten the connecting
screw.
E. Fasten the strike plate to your door jamb with the provided strike plate
screws.
Reassemble your lock using the Level Touch housing.
Make sure the bolt is retracted (unlocked).
A. Using the included housing, thread the tailpiece on the keyhole side
through the center hole in the motor and screw the two sides together with the
provided security bolts.
B. Snap the paddle vertically to hide the security bolts.
To disassemble in the future, use a paperclip or pin to press the small hole on the bottom of the paddle, pulling away from the door to release it.
Activate your Level Touch.
Unscrew the cap on the end of the bolt and insert the battery with the flat
(negative) end towards the cap. If you adjusted the bolt to the long position,
use the included long cap
instead of the standard cap. When you screw it back in, you’ll hear a welcome
chirp.
Download the Level Home app for iOS® or Android™, create an account, and
connect to your Level Touch.
Scan the QR code on the back to enable HomeKit™.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. For more
information on FCC compliance, please go to
www.level.co/FCC
The Level Touch is BHMA Grade AAA certified. You assume all risk and
responsibility in relation to the installation and performance of the lock and
any third-party components and services used in relation to the lock.
Please follow these suggestions and safeguards to decrease the chances of
damage to your Level Touch and to lessen the risk of harm or injury:
– Use the lock for its intended purposes only.
– Keep body parts away from the lock during operation to avoid injury.
– Do not crush, perforate, drop, throw, or try to deform the lock or battery.
– Do not short external contacts or circuits, expose your lock or battery to
water, liquids, or open flames or lit substances, or dispose of them in fire,
solvents, or water.
– Do not use the lock or battery if they aren’t working properly or have been
damaged or cracked.
– Dispose of the lock and battery in accordance with local requirements.
– Do not charge CR2 lithium batteries.
Battery life varies with usage.
Caution: This product comes with small parts and parts with sharp edges that
may cause injury or create a choking hazard.
To avoid injury or damage, keep away from children.
Revision 1.0