BEST BUY essentials BE-MQ25KW23 Magnetic Wireless Portable Charger User Guide

BE-MQ25KW23 Magnetic Wireless Portable Charger
User Guide

Before using your new product, please read these instructions to prevent any damage.

Package contents

• Portable charger
• USB-C to USB-C charging cable
• Quick Setup Guide

Compatibility
Supports devices with MagSafe compatibility, including iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 12 Pro Max, iPhone 12, and iPhone 12 Pro

Features

• MagSafe-compatible design for wireless charging
• Snaps magnetically into place to ensure an efficient charge
• Provides comfortable viewing with a built-in kickstand
• Recharges using the included USB-C cable
• Built and backed by Best Buy
  Note: For best results, use without a case, or use iPhone-compatible magnetic cases.

Charging your portable charger

• Connect the USB-C cable from your portable charger to a wall charger (not included), then plug the wall charger into a power outlet.
  

Notes:

• Make sure that the AC wall charger is 15W or higher.
• Press the button to check the battery power.
• The LED indicator blinks green when charging. The LED indicator lights green when fully charged.

Using your portable charger
Pull out the kickstand on the back of your charger.

Charging your device

Wireless charging
Place your Magsafe-compatible device on the center of the wireless charger (with the screen facing out).
Note: The LED indicator lights green for five seconds during wireless charging, then turns off.

Wired charging

1. Plug one end of the included USB-C cable into your portable charger’s USB-C port.
2. Plug the other end into your device. Your portable charger automatically begins charging your device.
   Note: The LED indicator lights green for five seconds during wired charging, then turns off.

Charging two devices
When two devices are being charged at once, the device with the wired connection charges first. The second device begins charging when the first device is fully charged.

Troubleshooting

The device is not charging or charging slowly.

• Make sure that your 15W power adapter (not included) is connected to a working power outlet.

• Make sure that your device is positioned in the center of your charging pad.

• Make sure that there are no other objects on the charging pad.

• When a metal object is detected or the charger gets too warm, the LED indicator flashes red. The charger enters protection mode until the issue is resolved.

• Try removing your device’s case.

• Make sure that your device is MagSafe compatible.

• Make sure that the AC wall adapter you are using is 15W or higher.

• Using the phone while it is charging will make it charge more slowly.

• Wireless charging technology is slower than wired chargers. This is normal.
  My device gets warm while charging.

• It is normal for devices to get warm while charging.

Specifications

Note: Power bank capacity will be less than the built-in cell capacity. Performance varies based on settings and environmental conditions and decreases over time and with use.
Dimensions (H × W × D):
2.7 × 0.6 × 0.5 in. (6.8 × 1.5 × 10.3 cm)
Weight: 5.36 oz. (152 g)
Cable length: 1 ft. (30 cm)
USB-C input/output: 5V/3.0A
Wireless charging output: 7.5W
Charger capacity: 5,000mAh/3.7V (18.5Wh)
Output capacity: 3,200 mAh (5V/3.0A)

Safety information

• Do not place metal objects between devices and the wireless charging pads.
• Recharge the portable charger if it has not been used for more than 90 days.
• Risk of fires and burns. Do not open, crush, heat above 140° F (60° C), or incinerate. Follow the manufacturer’s instructions.
• Operating environment temperatures: 32~104° F (0~40° C)
• Do not place this device in fire or other excessively hot environments.
• This product is intended for home office use, and for indoor use only.
• Consult local staff before using the product near medical or industrial equipment or on board an aircraft.
• Unplug the charger if not used for an extended period of time.
• Make sure that your mobile phone is compatible with wireless charging before using it.
• Make sure that the charging plate is placed on a flat surface.
• Make sure that the mobile phone does not move away from the charging pad’s wireless inductive charging area. Most non-metallic protective cases can be used for charging.  The thickness of the case should not exceed 0.1 in. (3 mm). Make sure that the case contains no metal.
• When metal is placed in the charging area, the charging plate automatically recognizes the metal and turns the power off. Normal charging resumes when the metal is removed.
• When the temperature of the charging pad is too high, the automatic protection mode turns on and the charger turns off. Unplug the power supply then use the charging  pad when it returns to a normal temperature.

Warnings

• Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, submerge in a liquid, or insert foreign objects into the power bank.

• Keep power banks out of the reach of children. Children should be supervised when a power bank is in use.

• Do not expose power banks to heat or fire. Do not store in direct sunlight or in a vehicle.

• Do not use or charge a damaged power bank. In the event of a power bank leaking, keep away from skin and eyes. Wash any affected area with large amounts of water and seek medical attention.

• Power banks need to be charged before use.
  Always use the correct cable and refer to the power bank manufacturer’s instructions for proper charging instructions.

• Do not use any cable other than that specifically provided or recommended by the power bank manufacturer.

• Do not use a damaged cable to charge or discharge a power bank.

• Do not leave a power bank on prolonged charge when not in use.
  Disconnect the power bank from the charging source once full.

• Observe the dedicated input and output ports for receiving and providing power on the power bank and the device to be charged to ensure correct use.

• Do not use any power bank which is not designed for use with the device you wish to charge. Refer to the device’s manual for proper charging instructions.

• When possible, detach the cable(s) from the power bank when not in use.

• Only use the power bank in the application for which it was intended.

• Store the power bank in a cool, dry place when not in use. When a power bank is not used for prolonged periods, the power bank should be charged periodically in order to maintain power bank life.

• Dispose of the power bank properly.

• Keep all instructions provided with the device for future reference.

• People with pacemakers should keep away from magnets. The magnets can negatively affect the function of the pacemaker.

• Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.

• Ensure that there are no metal parts on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.

Legal notices
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o_ and on, the user is encouraged to try  to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.
  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RSS-Gen statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is  subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RSS-102 Statement
This equipment complies with IC RSS_102 radiation exposure limits set forth for an uncontrolled environment.
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy essentials
For customer service, call
866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries
Best Buy essentials is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2022 Best Buy. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>