BEST BUY essentials BE-MQM10W22W 10W Magnetic Wireless Charger User Guide
- June 5, 2024
- BEST BUY essentials
Table of Contents
BEST BUY essentials BE-MQM10W22W 10W Magnetic Wireless Charger
Package contents
- 10 W Magnetic Wireless Charger with 6 ft. (1.8 m) cable
- Quick Setup Guide
Compatibility
- Apple iPhone 12 series and 13 series
- Any Qi-enabled devices including smartphones, headphones, and smart watches
features
- Wirelessly charges the iPhone 12 series and 13 series (7.5W) orAndroid devices (10 W)
- •Attaches to the back of your iPhone 12 series and 13 series using the amagnetic connector
- Plugs into wall adapters, car chargers and more using an attached USB-C cable (adapter not included)
- Gives you flexible placement options with a 6 ft. (1.8 m) cable
- Sleek white housing for a clean, unobtrusive look
- Built and backed by Best Buy
Note: For best results, use without a case, with a thin case or with a case that has a magnetic MagSafe array. Must be used with a 20 W (or higher) wall adapter
Using your charging pad
- Plug the USB-C end into a 20 W or higher power adapter (not included). Plug the adapter into a power outlet.
- Place your Qi-enabled device on the center of your wireless charger with the screen facing out. Your device starts charging.
Note: The iPhone 12 series and 13 series will directly attach to the wireless charge
Troubleshooting
The device is not charging or charging slowly.
- Make sure that your 20 W or higher power adapter (not included) is connected to a working power outlet.
- Make sure that your device is positioned in the center of your charging pad.
- Make sure that there are no other objects on the charging pad.
- Try removing your device’s case.
- Make sure that your device is Qi-enabled.
- Make sure that the AC wall adapter you are using is 20 W or higher.
- Using the phone while it is charging will make it charge more slowly.
- Your device may charge more slowly with the charging pad than a charging cable. This is normal.
My device gets warm while charging
- It is normal for devices to get warm while charging.
Specifications
- Dimensions: 2.3 × 2.3 × 0.3 in. (58 × 58 × 8.5 mm)
- Input: DC 5 V/3 A, 9 V/2.22 A
- Output: 5 W/7.5 W/10 W max.
- Cable length: 6 ft. (1.8m)
Safety information
- Avoid dropping.
- Do not disassemble.
- Do not place metal objects between devices and the wireless charging pads.
- Thick protective cases (≥ .1 in. [3 mm]) or a case that includes a magnet or metallic material (except safe phone cases), may not allow proper charging function.
- Keep the wireless charging pad away from any liquid or moisture.
- The maximum ambient temperature during use of this product must not exceed 104° F (40° C).
- Do not place this device in fire or other excessively hot envi This product is intended for home office use.
- For indoor use only.
- Consult local staff before using the product near medical or industrial equipment or onboard an aircraft.
- Prevent cables from being pinched or damaged.
- A damaged cable or device may malfunction and/or overheat. (Fire hazard).
- Unplug the product if not used for an extended period of time
WARNING:
- People with pacemakers should keep away from magnets. The magnets can negatively affect the function of the pacemaker.
- Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.
- Ensure that there are no metal parts on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.
WARNING
- People with pacemakers should keep away from magnets. The magnets can negatively affect the function of the pacemaker.
- Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.
- Ensure that there are no metal parts on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.
FCC Information
FCC Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy essentials
For customer service, call 866-597-8427
(U.S. and Canada)
www.bestbuy.com/bestbuyessentials
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>