Shenzhen Pengcheng Zhao Ming B150 LED Bluetooth Speaker User Manual

Shenzhen Pengcheng Zhao Ming B150 LED Bluetooth Speaker

Reminder

• The company is constantly committed to improving product quality and function. If the product design is updated Without notice
• The instructions have been carefully checked. If there is any error, the company will not bear any consequences
• Please use the equipment in a dry indoor and outdoor environment
• Do not place exposed fire sources, such as lighted candles, on the equipment
• Do not open or disassemble or repair the product components by yourself
• Please do not touch the products and accessories with water and moisture, and do not put them near the water
• When using this equipment, do not immerse the product in any liquid to avoid the product and Accessories being subject to water drops or splashes
• When the use of wireless devices is prohibited, or the use of devices will cause electronic interference Please turn off this product in case of potential safety hazards
• When flying, please abide by the relevant regulations and rules of the airline Close the product before flying to avoid potential safety hazards
• The charging line shall not be squeezed, pulled, bent, knotted, hung, or damaged People step on it to prevent the insulating layer of the charging line from being damaged and causing electric shock.

Charging instructions

• Please use a 5v-2a power adapter!
• Do not use the machine in high temperature and humid environment
• When not in use for a long time, it is recommended to charge the machine once a month to ensure
• When it needs to be used, the battery is sufficient and the machine can be used normally!
• Do not carry out any maintenance by yourself. If the product has quality problems, please contact the Distributor or manufacturer
  ( warm reminder: please turn off the machine when it is not used for more than 2 hours to ensure sufficient power)

Instructions for using

1. Long press on /off Short press mode switching

2. Short press the previous song, long-press the volume down

3. Short press play/pause

4. Short press a song, long-press the volume to increase

5. Briefly press the light color switch Long press the light on/ off

6. Aux audio cable interface (can be connected to computer / TV, etc.)

7. TF memory card interface (support capacity up to 32g)

8. Type-C (can be connected to the computer for USB charging or Mobile phone charging head)

Troubleshooting

Mobile Bluetooth connection method

1. Long press the speaker power key< > power on to enter the Bluetooth mode
2. Turn on Bluetooth, search, connect and pair
3. Open the music software on your phone to enjoy music

TWS dual machine interconnection operation method

( Note: two machines of the same model can be used)

1. In the power-on state, long press to enter the pairing connection
2. In TWS status, long press to disconnect

( Note: whether paired connection or disconnection, it can be completed by operating any one of the machines,t is not necessary to operate both machines at the same time.)

Power saving mode

When the device is in standby mode for ten minutes without any operation, it will automatically shut down.

Technical parameter

Troubleshooting

Note: If the above method fails to eliminate the fault, please contact the dealer, do not disassemble and repair the machine by yourself, otherwise, the warranty will not be provided.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>