Shenzhen Pengcheng Zhao Ming Co Ltd PX-01 Wireless Charging Alarm Clock User Manual

Shenzhen Pengcheng Zhao Ming Co Ltd PX-01 Wireless Charging Alarm Clock

USER MANUAL

Please reacl the user manual carefully before using this product

PACKAGE

• Wireless Charging Music Lamp x 1
• Power Adapter x 1
• Power Cord x 1
• User Manual x 1

PRODUCT FEATURES

• Delicate Design
• Wireless Charging.
• Bluetooth Speaker.
• Ambient Light.
• Bedside Lamp,
• Night Light
• Clock.
• Phone Stand.

PRODUCT INTRODUCTION

1. Touch Buttons
2. Wireless Charging
3. Phone Stand
4. Physical Buttons
5. Digital Display
6. Ambient Light
7. Type-C Connector
8. USB Flash Drive Reader
9. Dual Speakers
10. Speaker Diaphragm

HOW TO CHARGE

PRODUCT CHARGING

1. Connect the USB end of the data cable to the power adapter, and the other end to the product’s Type-C connector.
2. After the product is powered on, the DC icon on the display will glowing, indicating it is charging. When the DC icon on the display is put out, it indicates that itis fully charged.

WIRELESS CHARGING

3. After plugging in the main power, place the wireless charging device i the charging indicator area of this product to start charging.

BLUETOOTH CONNECTION

Bluetooth Name: PCXC 5001

Bluetooth Pairing

1. Long press the M button to reset the Bluetooth pairing.

Successful Connection

2. Then turn on the Bluetooth function of your mobile phone and click to select “PCXC5001” from the list of Bluetooth devices.

It will automatically enter pairing mode, and there will be a prompt sound and the Bluetooth icon on the digital display will stay on when the pairing is successful.

HOW TO USE THE BLUETOOTH SPEAKER

When playing music:

1. Short press the [ O] button to pause/play the music.
2. Short press the volume up button to play the next track long press to increase the volume. A beeping sound will indicate when the volume has reached its maximum
3. Short press the volume down button to play the previous track, long press to decrease the volume.

AMBIENT LIGHT OPERATION

Lighr Brightness Adjustment

1. Short press the light brightness button to cycle the brightness of the light through 10%-40%-60%-80%-100%-of.

Light Mode Adjustment

2. Short press the M button to cycle through RGBW color modes of the ambient light ight of.

CLOCK OPERATION

Clock setting

1. Short press the [{3] button to Clock setting,
2. Adjust hours and minutes with up Butlon and down Button,
3. Short press the M bution or no operation in 5 seconds.set o complete.

Adjust the clock brightness

1. Tap the touch button to adjust the clock brightness.

BUTTON FUNCTION

1. Power Bution

• Short press the Power Bution to pause/play the music.
• Long press the Power Bution to machine on and off.

2. Clock setting Button

• Short press the M button to Clock setting.
• Adjust hours and minutes with up Button and down Bution.

3. Light Brightness Button

• Short press the light brightness button to cycle the brightness of the light through 10%-40%-60%-80%-100%-0f.

4. Volume Up Button

• Short press the volume up button to play the next track,
• Long press the volume up button to increase the volume.
• Abeeping sound will indicate when the volume has reached its maximum.

5. Light Mode Bution

• Short press the M button to cycle through RGBW color modes of the ambient light ight off
• Long press the M bution to reset Bluetooth pairing.

6. Volume Down Button

• Short press the volume down button to play the previous track.
• Long press the volume down button to decrease the volume.

7. Touch Button

• Tap the touch button to adjust the clock brightness.

APPLICABLE EQUIPMENT

This product supports fast wireless charging and complies with the QI wireless charging standard;Through the magnetic induction should be short distance radio transmission, the equipment supportsall compliant with the QI standard wireless charging devices.With protocol QC2.0/QC3.0/PD adapter, wireless charging supports 1 OW load,With over voltage and over temperature protection.

ATTENTION POINTS

• To use wireless charging, make sure your phone has wireless charging capabilities.
• When the battery is low, it will beep and the ambient light will flash, suggesting charging.
• Use the QC3.0 adapter for best results.
• Please avoid thick cases {>0.07 inches) and other accessories when charging your device.
• Mobile phones below iPhone8 do not support wireless charging, such as iPhone5, 5S, 6, 6S, and 7.
• Do not use or store the product in direct sunlight or high temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product.
• Keep this product away from water or other liquids.

BASIC PARAMETER

• Model:PX-01
• Material:ABS/ Silica/ PCBNPC
• Input:DC 9V/2A
• Power:18W
• Wireless Power:10W
• Speaker Power:sw•2
• Product size:8.66X4.45X4.82 inch
• Origin :Shenzhen China
• Charging port:Universal Type-C

Specifications:

• Compliance: FCC Part 15
• Operating Distance: Minimum 20cm between device and body
• RF Exposure Testing: Certified under typical operating conditions

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 44 7 498.

FAQ:

Q: Can I modify the device?

A: Any changes or modifications not approved by the manufacturer may void the equipment’s operating authority.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>