HOME DECORATORS COLLECTION HD19565S 1-Light Wall Sconce User Guide

October 30, 2023
HOME DECORATORS COLLECTION

DECORATORS
COLLECTION
Item # 0000 000 000 / 0000 000 000 / 0000 000 000
Model # HD19565S / HD19565S1 / HD19565S2

HD19565S 1-Light Wall Sconce

Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service  8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

  • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
  • Before touching any wire, use a voltage tester to make sure it is not live.
  • When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove the cartridge fuses with a fuse puller.
  • Use tools with insulated handles and ladders made of wood or fiberglass.
  • To protect children, place a safety cover over any unused outlets.

DANGER: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS. Please reference the model and item numbers.
Warranty
FIVE (5) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS.

Pre-Installation

PLANNING INSTALLATION

  • Read all instructions before installing.
  • To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460.
NOTE: This product requires one 60W maximum medium base (E26) type “S” or type “A” or 9W maximum medium base (E26) self-ballasted LED vintage Edison bulbs (sold separately).
TOOLS REQUIRED (NOT INCLUDED)

HARDWARE INCLUDED
NOTE: Hardware is not shown to actual size. ****

Part Description Quantity
AA Crossbar assembly (Pre-assembled to fixture body) 1
BB Outlet box screw 2
CC Wire connector 3
DD Lock screw
(Pre-assembled to fixture body) 2

Pre-Installation (continued)
PACKAGE CONTENTS

Part Description Quantity
A Fixture body 1
B Rod 1
C Shade 1

Installation

  1. Installing the crossbar assembly

NOTE: Prior to installation, close or cover the sink drain and/or any vents near the  installation site to prevent loss of mounting hardware if dropped.

  • Remove the crossbar assembly (AA) from the backplate on the fixture body (A).
  • Align the crossbar assembly (AA) to the outlet box (not included) so that the mounting holes on the crossbar assembly (AA) are on the side.
  • Secure the crossbar assembly (AA) to the outlet box (not included) with outlet box screws (BB).

2. Making the electrical connections

  • Use wire connectors (CC) to connect the wires.
    Ground Wire:

    • Wrap the supply ground wire around the green ground screw on the crossbar assembly (AA), no less than 2 in. from the end of the wire. Tighten the ground screw.
    • Connect the fixture ground wire to the supply ground wire with a wire connector (CC).
    • Supply Wire: Connect the supply white wire to the white fixture supply wire with a wire connector (CC).
    • Connect the supply black (or red) wire to the black fixture supply wire with a wire connector (CC).
    • Wrap each connection with approved electrical tape and carefully insert all of the connected wires into the outlet box.

3 Attaching the fixture body to the outlet box

  • Line up the holes on the backplate and mounting holes on the folded edge of the crossbar assembly (AA).
  • Secure the fixture body (A) by threading the lock screws (DD) into the mounting holes on the crossbar assembly (AA).

4 Installing the shades

  • Unscrew the socket ring (1) from the socket of the fixture body (A). Place the shade (C) over the socket and secure with the socket ring (1).
  • Install the rod (B) to the fixture body (A).

5 Installing the light bulb

  • Install the correct bulb (not included) referring to fixture markings and/or labels for maximum wattage.
    NOTE: Uses one 60W maximum medium base (E26) type “S” or type “A” or 9W maximum medium base (E26) self-ballasted  LED vintage Edison bulbs (sold separately).

Care and Cleaning

  • Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
  • To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.

Troubleshooting

Problem Possible Cause Solution
The light(s) will not turn on. The bulb is burned out. ❑Replace the light

bulb.
The power is off.| ❑Ensure the power supply is turned on.
There is a faulty switch.| ❑Test or replace the switch.
There is a faulty wire connection.| ❑Check the wiring.
The fuse blows or the circuit breaker trips when the light is turned on.| There are crossed wires, or the power wire is grounding out.| ❑Discontinue use of the light.
❑Check the wire connections.
s Contact a qualified electrician or call the Customer Care Service Team at 1-800-986-3460.

Service Parts

MODEL: HD19565S / HD19565S1 / HD19565S2

Part Description
AA Crossbar assembly

(Pre-assembled to fixture body)
BB| Outlet box screw
CC| Wire connector
DD| Lock screw (Pre-assembled to fixture body)
Part| Description
---|---
A| Fixture body
B| Rod
C| Shade

Questions, problems, missing parts? Before returning to the store,  call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.

Documents / Resources

| HOME DECORATORS COLLECTION HD19565S 1-Light Wall Sconce [pdf] User Guide
HD19565S, HD19565S1, HD19565S2, HD19565S 1-Light Wall Sconce, 1-Light Wall Sconce, Wall Sconce, Sconce
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HOME DECORATORS COLLECTION User Manuals

Related Manuals