PHILIPS Screeneo U5 SCN550 Digital Projector User Guide

: June 3, 2024
: Philips

Table of Contents

philipsprojection

PHILIPS Screeneo U5 SCN550 Digital Projector User Guide

Thank you for choosing our Digital Projector.
We carefully engineered and crafted this product for you to enjoy TV shows, devour your favorite movies, laugh, cry, and share your best moments with your loved ones.

If you are happy, we are happy!
Share your best moments on:

philipsprojection

Setup Instructions

SOFTWARE END USER LICENSE AGREEMENT

This software end user license agreement (“this agreement”) is a legal and binding agreement between you (either an individual or entity) and SCREENEO INNOVATION SA, a swiss company, with its principal office at Route de Lully 5c, 1131 Tolochenaz, Switzerland. This agreement gives you the right to use certain software (the “software”) including user documentation in electronic form which may have been provided separately or together with a SCREENEO INNOVATION SA (Philips branded) product (the “device”) or a PC. By downloading, installing, or otherwise using the software, you accept and agree to be bound by all of the terms and conditions of this agreement. If you do not agree to these terms and conditions, do not download, install, or otherwise use the software. If you acquired the software in tangible media e.g., cd without the opportunity to review this license and do not accept these terms, you may receive a full refund of the amount, if any, that you paid for the software if you return the software unused with proof of payment within 30 days from the date of purchase.

Grant of License. This Agreement grants you a non-exclusive, non transferable, non-sub licensable license to install and use, on the Device or a PC, as applicable, one (1) copy of the specified version of the Software in object code format as set out in the user documentation solely for your personal use. The Software is “in use” when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device.

Ownership. The Software is licensed and not sold to you.
This Agreement grants you only the right to use the Software, but you do not acquire any rights, express or implied, in the Software other than those specified in this Agreement. SCREENEO INNOVATION SA and its licensors retain all right, title, and interest in and to the Software, including all patents, copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is protected by copyright laws, international treaty provisions, and other intellectual property laws. Therefore, other than as expressly set forth herein, you may not copy the Software without prior written authorization of SCREENEO INNOVATION SA, except that you may make one (1) copy of the Software for your back-up purposes only. You may not copy any printed materials accompanying the Software, nor print more than one (1) copy of any user documentation provided in electronic form, except that you may make one (1) copy of such printed materials for your back-up purposes only.

License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign, loan, or otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse engineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits the foregoing restriction. You may not remove or destroy any product identification, copyright notices, or other proprietary markings or restrictions from the Software. All titles, trademarks, and copyright and restricted rights notices shall be reproduced on your back up copy of the Software. You may not modify or adapt the Software, merge the Software into another program or create derivative works based upon the Software.

Termination of certain functionality. The Software may contain components of certain licensed software including software licensed from Microsoft Corporation (“Microsoft”) which implements Microsoft’s digital rights management technology for Windows Media. Content providers are using the digital rights management technology for Windows Media (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated.
Your Device may also use WM-DRM software to transfer or play Secure Content (“WM-DRM Software”). If the security of such WM-DRM Software is compromised, Microsoft may revoke (either on its own or upon the request of the owners of Secure Content (“Secure Content Owners”) the WM-DRM Software’s right to acquire new licenses to copy, store, transfer, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content. Microsoft may, in conjunction with such license, also download revocation lists onto your Device on behalf of Secure Content Owners, which may disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content. Secure Content Owners may also require you to upgrade some of the WM- DRM components distributed with this Software (“WM-DRM Upgrades”) before accessing their content. When you attempt to play Secure Content, WM-DRM Software built by Microsoft will notify you that a WM-DRM Upgrade is required and then ask for your consent before the WMDRM Upgrade is downloaded. WM-DRM Software built by SCREENEO INNOVATION SA may do the same. If you decline the upgrade, you will not be able to access Secure Content that requires the WM- DRM Upgrade; however, you will still be able to access unprotected content and Secure Content that does not require the upgrade. WM-DRM features that access the Internet, such as acquiring new licenses and/or performing a required WM- DRM Upgrade, can be switched off. When these features are switched off, you will still be able to play Secure Content if you have a valid license for such content already stored on your Device. However, you will not be able to use certain of the WM-DRM Software features that require Internet access such as the ability to download content that requires the WM-DRM Upgrade. All title and intellectual property rights in and to the Secure Content is the property of the respective Secure Content owners and may be protected by applicable copyright or other intellectual property laws and treaties. This Agreement grants you no rights to use such Secure Content. To summarize, if the Software contains Microsoft WM-DRM components – Secure Content you desire to download, copy, store, display, transfer, and/ or play is protected by the Microsoft WM- DRM components of the Software. Microsoft, Secure Content Owners, or Secure Content distributors may deny you access, or restrict your access, to Secure Content even after you have paid for, and/or obtained, it. Neither your consent nor the consent or approval of SCREENEO INNOVATION SA is necessary for any of them to deny, withhold or otherwise restrict your access to Secure Content. SCREENEO INNOVATION SA does not guaranty that you will be able to download, copy, store, display, transfer, and/or play Secure Content.

Open Source Software. (a) This software may contain components that are subject to open-source terms. This Agreement does not apply to this software as such. More information can be found in the documentation. If applicable, source code which needs to be offered under the applicable open source licenses will be delivered upon request, please contact philips.projector.eu@screeneo.com in English with product identification or for more information. (b) Your license rights under this Agreement do not include any right or license to use, distribute or create derivative works of the Software in any manner that would subject the Software to Open Source Terms. “Open Source Terms” means the terms of any license that directly or indirectly (1) create, or purport to create, obligations for SCREENEO INNOVATION SA with respect to the Software and/or derivative works thereof; or
(2) grant, or purport to grant, to any third party any rights or immunities under intellectual property or proprietary rights in the Software or derivative works thereof.

Termination. This Agreement shall be effective upon installation or first use of the Software and shall terminate
(i) at the discretion of SCREENEO INNOVATION SA, due to your failure to comply with any term of this Agreement; or (ii) upon destruction of all copies of the Software and related materials provided to you by SCREENEO INNOVATION SA hereunder. SCREENEO INNOVATION SA’s rights and your obligations shall survive the termination of this Agreement.

Upgrades. SCREENEO INNOVATION SA may, at its sole option, make upgrades to the Software available by general posting on a website or by any other means or methods. Such upgrades may be made available pursuant to the terms of this Agreement or the release of such upgrades to you may be subject to your acceptance of another agreement.

Support Services. SCREENEO INNOVATION SA is not obligated to provide technical or other support (“Support Services”) for the Software. If SCREENEO INNOVATION SA does provide you with Support Services, these will be governed by separate terms to be agreed between you and SCREENEO INNOVATION SA.

Limited Software Warranty. SCREENEO INNOVATION SA provides the Software ‘as is’ and without any warranty except that the Software will perform substantially in accordance with the documentation accompanying the Software for a period of one year after your first download, installation or use of the Software, whichever occurs first. SCREENEO INNOVATION SA’ entire liability and your exclusive remedy for breach of this warranty shall be, at SCREENEO INNOVATION SA’ option, either (i) return of the price paid by you for the Software (if any); or (b) repair or replacement of the Software that does not meet the warranty set forth herein and that is returned to SCREENEO INNOVATION SA with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. This limited warranty shall not apply to you if the Software was provided to you free of charge on an evaluation only basis.

No other warranties. Except as set forth above, SCREENEO INNOVATION SA and its licensors do not warrant that the software will operate error free or uninterrupted, or will meet your requirements. You assume all responsibilities for selection of the software to achieve your intended results, and for the installation of, use of, and results obtained from the software. To the maximum extent permitted by applicable law, SCREENEO INNOVATION SA and its licensors disclaim all warranties and conditions, whether express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, and accuracy or completeness of results with respect to the software and the accompanying materials. There is no warranty against infringement. SCREENEO INNOVATION SA does not warrant that you will be able to download, copy, store, display, transfer, and/or play secure content.

Limitation of liability. Under no circumstances will SCREENEO INNOVATION SA or its licensors be liable for any consequential, special, indirect, incidential or punitive damages whatsoever, including, without limitation, damages for loss of profits or revenues, business interruption, loss of business information, loss of data, loss of use or other pecuniary loss, even if SCREENEO INNOVATION SA or its licensors have been advised of the possibility of such damages. In no event shall SCREENEO INNOVATION SA or its licensors aggregate liability for damages arising out of this agreement exceed the greater of the price actually paid by you for the software or five pounds sterling (5.00).

Trademarks. Certain product names used in this Agreement, the Software, and the printed user documentation may be (registered) trademarks of SCREENEO INNOVATION SA, its licensors or other third parties. You are not authorized to use any such trademarks.

Export Administration. You agree that you will not directly or indirectly, export or re-export the Software to any country for which the United States Export Administration Act, or any similar United States law or regulation requires an export license or other U.S. Government approval, unless the appropriate export license or approval has first been obtained. By downloading or installing the Software you agree to abide by this Export provision.

Governing Law – Litigations. This Agreement shall be governed by Swiss Law. Any dispute arising in connection with this Agreement, if not settled amicably, shall be brought to the competent court of Switzerland.

General. This Agreement contains the entire agreement between you and SCREENEO INNOVATION SA and supersedes any prior representation, undertaking or other communication or advertising with respect to the Software and user documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue in full force and effect. This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.

WARRANTY CARD

Dear Customer, you may obtain a copy of the warranty conditions from the dealer, by downloading it from the internet or by contacting the customer support center. Please retain your sales receipt and the warranty card!

Device type, model and serial number

Date of purchase, invoice number

Name, address, telephone number, stamp and signature of the vendor

Name & Address of Customer

Repair Number| Service Center| Repair Acceptance Date| Return Date| Defect Specification
---|---|---|---|---
| | | |
| | | |
| | | |
Description of the Repair| Spare Part(s)/N| Warranty Period of the New Component(s) / Sta
---|---|---
| |
| |
| |

Icons

COUNTRY/HOTLINE

Argentina: See international support
Australia: 1800 251 367
Austria: +43 720 881 525
Belgium: +32 78 077 761 (FR) / 209 (NL)
Brasil: +55 85 4042 1414
Bulgaria See international support
Canada: +1 873-514-1003
Chile: +56 2249 94507
Colombia: +57 1 328 8975
Croatia See international support
Czech Republik: +420 910 880 087
Denmark: +45 78 76 93 84
Egypt: +20 111 456 1786
Estonia: +3726166480
Finland: +358 75325 82 56
France: +33 6 44 60 30 83
Germany: +49 421 836 79789
Great Britain: +44 131 322 1364
Greece: +30 261 118 0299
China: (+86)01059357346
Hong Kong SAR: +852 3183 0168
Hungary: +36 1 998 9144
Indonesia: +62 855 7467 6380
Ireland: +353 76 680 5635
Israel: +972-8-9418222
Italy: +39 0 776 1580046
Japan: +81-50-3205-0854
Latvia: +37166155194
Lithuania: +37052351699
Luxemburg: +352 2786 21 07
Malaysia: +60 16 299 1498
Mexico: +52 55 4166 7410
Morocco: +212 641 631 095
Netherlands: +31 85 0013 738
New Zealand: 0800 426 237
Norway: +47 21 95 41 81
Poland: +48 61 880 12 15
Portugal See international support
Puerto Rico: +1 787-305-3813
Romania: +40 31 630 5446
Russia: +749 5148 82 08
Serbia See international su p port
Singapore: +65 6841 2668
Slovakia See international support
Slovenia See international support
Spain: +34 518 889 132
Sweden: +46 8 580 97 043
Switzerland: +41 21 539 16 66 (DE) / 67 (IT) / 68 (FR)
Turkey: + 90 (212) 2697676
UAE: +971 4 4473106
USA: +1 812-308-4615

International customer support:
+41 21 53 91 665
philips.projector.eu@screeneo.com
www.philips.com/support and our Community: https://community.screeneo.com

RED Caution
The product shall be connected to a USB interface
of version USB2.0 or higher.
The operating temperature of the EUT can’t exceed
35 Degrees Celsius and shouldn’t be lower than 0
Degree Celsius.
Only indoor use for band 5150-5350MHz.
Hereby, Screeneo Innovation SA declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Screeneo Innovation SA is under license. Other trademarks and trade names are those of their respective owners.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

FCC ID: 2ASRT-SCN550
FCC Warning

15.19 Labeling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
ment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SIMPLIFIED EU DECLARATION OF CONFORMITY FOR RADIO DEVICE

Hereby, Screeneo Innovation SA declares that the equipment is in compliance with Directives 2014/53/EU, 2009/125/EC, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philips.com

NORTH AMERICA Service Center:
Cooper General Global Services, Inc.
Attn: Screeneo/Philips
920 Minters Chapel Road, Suite 600
Grapevine, TX 76051

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of Screeneo Innovation SA, and Screeneo Innovation SA is the warrantor in relation to this product.

Screeneo Innovation SA
Route de Lully 5C
1131 – Tolochenaz – Switzerland
www.philips.com
philips.projector.eu@screeneo.com

EUROPEAN Service Center:
Euro Repair Center
Europa-Allee-77
54343 Föhren
Germany