boAt Rockerz-610 On Ear Wireless Headphone User Manual

: June 6, 2024
: Boat

Table of Contents

SPECIFICATIONS
ACCESSORIES
Important Safety Information
PAIRING
PLAYBACK / CONTROLS
CALLS
Use Responsibly
How to fold the headphone
Documents / Resources

boAt Rockerz-610 On Ear Wireless Headphone

SPECIFICATIONS

Bluetooth version:	Bluetooth V4.1
Effective transmission range:	10m
Battery:	450mAh Li Polymer battery
Charging time:	3hours(maximum)
Playing time:	20hours
Stand by time:	up to 45 days
LED indicator status:	Blue LED for power and BT pairing indicator;

ACCESSORIES

Micro USB charging Cable
Instruction Manual

| Multifunction button| On/Off
Play
Pause
Call/Answer/Hang Up
---|---|---
| Volume Down/Track Back| Decrease the volume
Go to previous song
| Micro USB charging port|
| microfiber pu leather headband|
| Volume Up/Track Forward| Increase the volume
Go to next song
| Microphone|
| LED indicator|

Important Safety Information

POWER ON

Press and hold the Multifunction button (1) to turn the headphones on, The LED- indicator will flash BLUE when headphones are on.

POWER OFF

Press and hold the Multifunction button (1) to turn the headphones off. The LED indicator will stop flashing when off.

CHARGING THE HEADPHONES

Use the Micro USB cable and connect headphones to your computer or adaptor device made for USB charging.
A red LED indicator will turn on when the headphones are charging. The red LED light will turn off when headphones are fully charged.

PAIRING

Make sure your phone, computer or music device is turned on and within 1 meter of each other.
Hold down Multifunction On/Off button (1) for about 3 seconds until LED light starts to flash BLUE quickly.
Activate the Bluetooth feature on your phone or device and set it to search for Bluetooth devices (Discoverable).
Select ‘ boAt Rockerz 610 ‘ from the list of found devices.
If necessary, enter passcode ‘0000’ to pair and connect the headphones to your device.
Once successfully paired, the LED light will flash BLUE once every few seconds

PLAYBACK / CONTROLS

Press Multifunction button Play/Pause (1) to start and pause audio.
Press (button 5) to skip forward to next track. Press and hold down button to increase volume.
Press (button 2) to go back to previous track. Press and hold down button to decrease volume.

Note: The controls will not function when charging.

CALLS

To answer an incoming call, press the Multifunction Play/Pause (button 1)
To end call, press the same button again
To decrease or increase the volume during the call, press and hold down button 2 or button 5

Use Responsibly

Do not use headphones when it’s unsafe to do so-while operating a vehicle, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required
It’s dangerous to drive while wearing headphones, and illegal because it decreases your chances of hearing life-saving sounds outside of your vehicle, such as another car’s horn and emergency vehicle sirens. Please avoid wearing your headphones while driving