KARCHER TLA 4 Telescopic Spray Lance Instruction Manual

KARCHER TLA 4 Telescopic Spray Lance

General notes

Read these original operating instructions and the safety instructions chapter before using the device for the first time. Act in accordance with them.
Keep them safe for future reference or for future owners.

Safety instructions

Hazard levels

DANGER

• Indication of an imminent threat of danger that will lead to severe injuries or even death.

WARNING

• Indication of a potentially dangerous situation that may lead to severe injuries or even death.

CAUTION

• Indication of a potentially dangerous situation that may lead to minor injuries.

ATTENTION

• Indication of a potentially dangerous situation that may lead to damage to property.

DANGER

• Risk of electric shock. Maintain a sufficient distance from power or high-volt-age lines when cleaning.

WARNING

• The device is not intended for use by persons with restricted physical, sensory or mental abilities or those lacking in experience and/or lacking in knowledge.
• Children must not operate the device.
• Only people who have been instructed on how to use the device, or have proven their ability to operate it, and have been explicitly instructed to use it, must use the device.
• Children must be supervised to prevent them from playing with the appliance.
• Keep people and objects away from the object to be cleaned.
• Switch the high-pressure cleaner off and disconnect the high-pressure hose from the high-pressure gun after finishing the cleaning work.
• Depending on the high-pressure cleaner used, larger recoil torques can occur with the accessories used. Familiarize yourself with the telescopic spray lance by testing it on the ground first. Only work with a firm footing on the ground. Never use it while on a ladder.
• Make sure you have a firm footing on the ground before you trigger the high-pressure jet.

CAUTION

• Maximum water temperature 60°C (please observe the instructions for your high-pressure cleaner).

Note

• Observe the safety instructions of your high-pressure cleaner.

Intended use

The telescopic spray lance can be used with all Kärcher Home & Garden high- pressure cleaners of the K2 to K7 classes. It is not suitable for commercial use.

Environmental protection

The packing materials can be recycled. Please dispose of the packaging in accordance with the environmental regulations. Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.

Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Symbols on the device

• General warning symbol
• Risk of a larger recoil moment

Description of the device

Illustration A

1. Telescopic pipe unlocking button
2. Joint
3. Adjustment lever joint
4. Upper telescopic pipe
5. Mount for spray lance
6. High-pressure nozzle, brown
7. Clip for nozzle mounting
8. High-pressure nozzle, white
9. Spray lance
10. Telescopic spray lance hose for connection to the trigger gun
11. ower telescopic pipe
12. Hook and loop strips
13. Trigger gun
14. Holder for trigger gun

Not included in the scope of delivery

Assembly

The spray lance, the existing trigger gun, the hose of the telescopic spray lance and the high-pressure cleaner hose must be installed before operating the device.

Install the high-pressure nozzle on the spray lance

Select the nozzle according to the high-pressure clean-er used. K 2, K 3, K 4, K 5: Use a brown high-pressure nozzle K 6, K 7: Use a white high-pressure nozzle (already installed).

Illustration B

1. Loosen and remove the slip for the nozzle mounting from below with a small screwdriver.
2. Pull out the unused high-pressure nozzle.
3. Select the required high-pressure nozzle according to the high-pressure cleaner used and press it in.
4. Insert the clip and secure the high-pressure nozzle.

Installing the spray lance

Illustration C

1. Insert the spray lance firmly into the adapter and fix it with a 90° turn.

Initial startup

Mounting the trigger gun

1. Insert the trigger gun with the connected high-pres-sure cleaner hose into the holder of the telescopic spray lance.
   Illustration D

2. Tighten one hook and loop strip over the top of the trigger gun.

3. Tighten the other hook and loop strip over the back of the trigger gun.

Connect the hose of the telescopic spray lance to the trigger gun

Illustration E

1. Push the adapter of the hose into the mount of the trigger gun.
2. Turn the hose until it latches into place.

Connecting high-pressure cleaner

Note
The high-pressure cleaner hose should be connected to the trigger gun in accordance with the operating instruc-tions of the high-pressure cleaner before it is installed in the holder of the telescopic spray lance.

Operation

The telescopic spray lance comprises 2 individually ex-tendable pipes that are connected with a joint. With the help of the joint, the telescopic spray lance can be fixed at different angles up to a maximum of 180°. When extending the telescopic pipes and adjusting the angle, the telescopic spray lance can be placed on the gun holder.

1. Adjust the telescopic spray lance to the desired length.
   Illustration F

   • Press and hold the telescopic pipe unlocking button.
   • Extend the lower telescopic pipe to the desired length.
   • Release the telescopic pipe unlocking button. The telescopic pipe is locked.
   • If necessary, repeat the steps for the upper telescopic pipe.

2. Adjust the angle of the telescopic spray lance. Illustration G

   • Push the adjustment lever towards the telescopic pipe and keep it pressed.
   • Hold one pipe and set the desired angle by mov-ing the other pipe.
   • Release the telescopic pipe adjustment lever.

3. Put the high-pressure cleaner into operation, refer to operating instructions for the high-pressure cleaner.

4. 4. Switch on the high-pressure cleaner, also refer to the operating instructions for the high-pressure cleaner.
   Illustration H

   • Unlock the lever of the trigger gun.
   • Pull the lever on the trigger gun and commence cleaning.

Ending operation

1. Switch off the high-pressure cleaner.

2. Stop the water supply to the high-pressure washer.

3. Depressurize the device.
   Illustration H

   • Press the unlocking lever on the trigger gun.
   • Press the trigger gun lever to relieve the remaining pressure in the system.

4. Press the hose of the telescopic spray lance into the mount of the trigger gun, turn it and remove it. Illustration I

5. Loosen the hook and loop strip and remove the trig-ger gun with the connected high-pressure cleaner hose from the holder.

Transport and storage

CAUTION
Failure to observe the weight Risk of injury and damage Be aware of the weight of the device during transport and storage.
ATTENTION
Length of the telescopic spray lance Only store and transport the telescopic spray lance with the telescopic pipes pushed in and folded up.

1. Finish operation, refer to chapter Ending operation

2. Insert the telescopic pipe.
   Illustration J

   • Press and hold the unlocking button.
   • Push in the telescopic pipe as far as it will go. c Release the unlocking button.

3. If necessary, repeat steps for the 2nd telescopic pipe.

4. Fold up the telescopic spray lance.
   Illustration K

   • Press and hold the adjustment lever.
   • Hold the lower telescopic pipe and fold the upper telescopic pipe onto the lower telescopic pipe. c Release the adjustment lever.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorized customer service site. (See overleaf for the address)

References

• Cher - Official Site
• Cleaning equipment and pressure washers | Kärcher International
• Cleaning equipment and pressure washers | Kärcher International
• Dealer Search | Kärcher International
• Home and Garden Warranty Registration USA - Kärcher

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>