KOHLER K-4991-ER High-Efficiency Urinal Wall Hug Instruction Manual
- June 8, 2024
- Kohler
Table of Contents
KOHLER K-4991-ER High-Efficiency Urinal Wall Hug
-
Features
- Washout urinal.
- ¾” (19 mm) rear spud.
- 0.125 – 1.0 gpf (0.47 – 3.8 lpf).
- 14″ (356 mm) extended rim.
- Will replace K-4904-ER.
-
Material
Vitreous china. -
Recommended Products/Accessories
- K-23726 Drain treatment
- K-23725 Cast iron cleaner
- K-4929 Waterless Urinal Maintenance Balls
-
Included Components
- Additional Components:
- 2″ outlet spud
- 3/4″ inlet spud
- Hanger(s) (Qty 2)
- Strainer
-
Codes/Standards
ASME A112.19.2/CSA B45.1
DOE – Energy Policy Act 1992
EPA WaterSense®
California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651 -
KOHLER® One-Year Limited Warranty
See website for detailed warranty information. -
Available Colors/Finishes
Color tiles intended for reference only
High-Efficiency Urinal
Technical Information
All product dimensions are nominal.
-
Flush outlet
technology:
Washout -
Spud size: 3/4″, Inlet, Rear
Min. Water per -
Flush:
0.125 gal (0.5 L)
Max. Water per -
Flush:
1 gal (3.8 L)
Designed for the above water use when installed with a
water-saving flushometer.
Notes
Install this product according to the installation guide.
Refer to manufacturer’s instructions and local codes for flushometer
requirements.
Recommended ADA outlet spud height will account for normal product variation.
For ADA compliance, measurement must be 17″ (432 mm) or less from the floor to
the top of the lip. For CSA B651 compliance, measurement must be 16-7/8″ (429
mm) or less from the floor to the top of the lip. ADA, CSA B651 compliant when
installed to the specific requirements of these regulations.