OLIGHT Olantern Classic 2 Pro LED Lantern User Manual
- June 3, 2024
- OLIGHT
Table of Contents
OLIGHT Olantern Classic 2 Pro LED Lantern
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
All above specifications are test results based on ANSI/NEMA FL1-2009 Standard.
PRODUCT OVERVIEW
CHARGING
Before first use, please fully charge the product with either of the following
two methods.
Method 1 with USB-C cable: Connect one end of the provided USB-C cable to
an external USB-C power source (power adapter not included), open the USB dust
plug, and then insert the other end of the cable into the USB-C charging port.
Method 2 with USB magnetic charging cable: Connect the USB end of the
magnetic charging cable to an external USB power source, then attach the other
end of the cable to the magnetic charging port at the bottom of the product.
While charging, the indicator below the rotary knob blinks red to indicate it
is in charging status, and the indicator turns green to indicate it is fully
charged (battery power＞95%).
NOTE
- Best charging efficiency with an 18W or higher-capacity power source. It takes only 4 hours to fully charge with a 18W USB-C power source.
- Please charge with the standard USB magnetic charging cable of Olight. It takes 10 hours to fully charge with the magnetic charging. (For reference only. When the USB power source is insufficient to provide 5V 2A power capacity, the charging time will be longer).
The USB magnetic charging cable is not included.
BATTERY INDICATOR
While powered on or dimming, the indicator below the rotary knob indicates the battery level.
REVERSE CHARGING (POWER BANK FUNCTION)
The product has 2 output ports for charging other digital devices. While reverse charging, the indicator displays the battery level.
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
WARNING
- DO NOT store the product in the car or any place where the temperature may exceed 60°.
- When the charging port is not in use, please keep the dust plug inserted to prevent dust or foreign matters from entering.
- DO NOT place the product in any dusty environment. Otherwise, the dust may enter the rotary knob switch and cause it to malfunction.
- DO NOT disassemble the product.
- DO NOT immerse the product in seawater or other corrosive media to avoid damage to the product.
- Please prevent it from falling and handle it with care.
- Fully charge the battery before storing the light for a long period of time.
NOTICE
- Please keep the MCC charging port at the bottom clean and dry.
- Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
- If the product is charging with both the USB-C cable and MCC cable, the USB-C charging will be prioritized.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual.
HOW TO OPERATE
ON/OFF: Turn on by rotating the rotary knob clockwise and turn off by
rotating counter-clockwise.
Change Light Output: When the light is on, keep rotating the rotary knob
clockwise for the stepless adjustment of the light output in the following
order: low orange light, high orange light, low warm white light, and high
warm white light. Rotating the rotary knob counter-clockwise will change the
light output in the reverse order.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
EU-Declaration of Conformity can be found here :
https://olightworld.com/ec-declaration
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road,
Changan Town, Dongguan City, Guangdong, China.
Made in China
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>