AT T T10 True Wireless Earbuds User Guide

AT T T10 True Wireless Earbuds

Precautions

• The earbuds should be stored in a dry and ventilated environment, avoid from water, moisture and dust which may affect the perfonnance of the earbuds.
•  Avoid using organic solvents or items containing these ingredients to clean the earbuds.
•  In case of any issues the earbuds, do not take them apart as the warranty will be void.
•  Do not use any other charging cable, always use the USB cable provided or a similar charging cable.

Specifications

Wireless version:

| 5.0
---|---
Supportprok>cols:| A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
Frequency:| 20Hz-24KHz
Working distance:| 10m/30Ft
Earbuds battery capacity:| 40mAh
Charging box battery capacity:| ****

300mAh

Charging time:| 2-3Hours
Standby:| Upto50Hrs

Parts and Features

Charging the Earbud

•  Place the earbuds into the charging case. The earbuds will be turned off automatically. Press the power button on the charging case to charge the earbuds. The LED light turns on indicating the unit is in charge mode. Press the power button twice to stop charging, the LED light will go off.
•  When the battery is fully charged the light will tum off automatically.

Charging the Case

•  Connect the charging case via USB cable to charge the case.
•  During charging the LED light flashes. When charging is complete the lights will remain solid

Operation

Turning ON/Auto Power/Auto Pair

Remove both earbuds simultaneously and insert in your ears. Once the earbuds are taken out of the charging case the earbuds will Power ON Automatically and after 2 seconds the earbuds will pair together. And now the earbuds are ready to pair to your device. Tum on the Bluetooth® Feature on your device, the device will search for all the Bluetooth devices (see the user guide of your phone for instructions) and select T10 from the Bluetooth device list. Once selected the device will pair with your T10 earbuds. Note: In the event, the earbuds do not connect automatically once removed from the case, click the left earbud (MFB) and wait for 5 sec. If it still does not pair the earbuds, switch off both by pressing MFB for 5 sec (you will hear Power OFF in both ears) and inserting them into the cradle, if the two red led lights up, repeat step 1.

Turning OFF

•  Press the MFB of the earbuds for about 5 seconds and the earbuds will be powered off automatically.
•  If the earbuds are away from your Bluetooth devices for over 5 minutes the earbuds will power off automatically. Thus, saving the life of the battery.
• In power off mode, press the MFB of the earbuds for 2 seconds and the earbuds power will tum on.

Phone Calls

Make sure the earbuds are connected with your mobile device. Once you receive a call you have the following 3 options.

• To Answer the call
  • Press once the MFB of any earbud.
• To Hang Up a Call
  • Once the call is completed, press the MFB of any earbud once to disconnect.
• To Reject the call
  • Press and hold any MFB for 2 sec, to reject the call.
• Note: In standby mode, double touch the earbuds, to re-dial the last number called.

Listening to Music

• Play
  • Make sure the earbuds are connected with your device, once connected select the music from your device to play.
• Pause
  • While playing touch the MFB of any earbud once to pause the music, touch again to play

Quick Reference Guide

• Power ON.
  • Power On: Press MFB for 2 secs on both earbuds till you hear
• Power Off.
  • Power Off: Press MFB for 5 sec on both earbuds till you hear
• Pairing Mode: Press MFB for 5 sec in power off mode, until you hear Ready to Pair.
• Play/Pause: While playing music, press MFB of any earbud once.
•  Incoming Call: Press the MFB on either of the earbuds to answer the incoming call.
•  Disconnecting the Call: Press the MFB on either of the earbuds once to disconnect the call.
•  Reject Incoming Call: Press and hold MFB of earbuds to reject.
•  Recall Last Number. Press twice the MFB of earbuds.

Trouble Shooting

.
Cannot un the units on| Charge the units for 1- 2 houl1.

Turning off automatically

| ****

Possible low battery. Charge the earbuds.

Nolle when connected to amobile

devla,

| Low battery, dlarge the ear1:>uds.

Obstruction between the device and earbuds.

Distance between the Phone and earbuds Is beyond • nal range.

Warranty Information

The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/eledronics or call 1(888) 920-8680 from the USA or canada. Concept 101 LLC warrants that the product will be free from defects in material, parts and workmanship for the period of one (1) year from date of purchase. Concept 101 LLC agrees that it will, at its option, replace the defective product with either a new or remanufactured product equivalent to your original purchase during the warranty period. Please be advised the returned product must carry the proof of purchase.

EXCLUSIONS AND LIMITATIONS

Concept 101 LLC does not warrant that the product will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this use(s manual. Concept 101 LLC has made every effort to ensure that this use(s manual is accurate and disclaims liability for any inaccuracies or omissions that may have occurred. Information in this use(s manual is subject to change without notice and does not represent a commitment on the part of Concept 101 LLC Concept 101 LLC reserves the right to make improvements to this use(s manual and/or to the products described in this use(s manual at any time without notice. If you find information in this quick start guide that is incorrect, misleading, or incomplete, please contact us through our website

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  This device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio{TV technician for help.

FCC RF Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>