NDL Industries HVAC-R Innovative Products with High Quality Performance User Guide
- June 13, 2024
- NDL Industries
Table of Contents
NDL Industries HVAC-R Innovative Products with High Quality Performance
User Guide
HVAC-R Products
ACR Copper Fittings
NDL’s ACR copper fittings have zero reported failures since 1999 and carry an
unparalleled 10-year warranty. Every fitting is sizestamped for easy
identification and are heavier and thicker than most in the industry. Our ACR
copper fittings meet or exceed ASME standards; and are tested for actual burst
pressure and approved by TSSA with 4.5 times safety margin. ANSI/ASME B16.22;
TSSA; RoHS; CRN
PAC Copper Sweat Fittings
NDL’s PAC copper fittings are of the highest quality with excellent fit
and finish. Each fitting is size-stamped, double-washed, and poly-bagged in
contractor-friendly sized quantities. ANSI/ASME B16.22, CRN
Isolation Refrigeration Ball Valves
NDL’s isolation ball valves are designed for refrigeration, commercial HVAC,
VRV, VRF, multimini split, and sub-critical applications. Our heavy-duty,
full-port isolation ball valves use 100% virgin Teflon seals and seats, making
them the best in their class. Sizes range from 1/4” to 4 1/8”, and our elite
ball valves are built to last with 900 psi maximum working pressure on sizes
up to 7/8”. UL listed; CRN; CE; ROHS
Refrigeration Ball Valve Insulation
The NBV-IN Insulation is an EPDM-based, closed-cell, lightweight, elastomeric
thermal insulation, specifically designed for solar- and steam-heating
applications with service temperatures ranging from -57°C to 125°C. Its tough
skin allows for easy installation and will not melt or burn.
Sight Glasses
NDL’s full-brass body sight glasses use special litmus paper that returns to
its original color once the system is cleaned, eliminating the need to change
the eye. Available in both sweat (ODF) and flare (SAE) ends. UL listed; RoHS.
Filter Driers
Uniquely designed for the complete protection of refrigeration systems, our
premium filter driers use XH11 desiccant with activated alumina and charcoal
and are suitable for all refrigerants, including R410A. Available as liquid
line, biflow, suction line, shells, and replaceable cores with sweat, flare,
and press-fit ends. In addition, sight glass options are available. UL listed;
CE; CRN.
TW Filter Driers with Spectroline AR-GLO
A complete patented solution to reduce warranty repair costs and reduce
service callbacks. TW Filter Driers with Spectroline AR-GLO uses a fluorescent
dye trace wafer to pinpoint the exact location of leaks, which is approved by
all leading compressor and refrigeration equipment manufacturers. UL listed;
CE; CRN.
NDL QUALITY STAMP
Only after our products pass the quality test will the NDL name be stamped on
them. We stand behind our products’ outstanding field performance.
Gas Connectors
NDL’s gas connectors are engineered with corrosion-resistant stainless steel
304 tubing and zinc-plated steel fittings that provide 100% quality you can
trust. The gas connector’s safe-guard yellow epoxy coating protects from
corrosion, chemical stains from everyday household products, and plumbing
repair products. Our gas connectors also feature interchangeable fittings for
any application and are flexible enough to withstand 90-degree twists.
Available in sizes from ID 1/4” to 3/4” with lengths from 12” to 72”, FPT,
FIP, MPT, and MIP end connections. ANSI Z21.24, Z21.69, and Z21.75; CSA 6.10,
6.16, and 6.27
Gas Ball Valves
NDL’s gas ball valves are engineered with a compact forged brass body design
with a convenient quarter-turn handle that allows for quick and easy
residential or commercial installations. Our gas ball valves feature PTFE
seats and NBR O-rings to reduce contamination build-up and have a working
pressure at 0.5 psi. ASME Z21.15 and CSA 9.1 approved at 0.5 psi; ASME B16.44
and CR 91-002 approved at 5 psi; ASME B16.33 and CGA 3.16 approved, and CSA
175 at 175 psi; UL at 250 psi
Lead-Free Brass Fittings and Nipples
NDL’s brass fittings and nipples are manufactured for longevity and superior
corrosion resistance and are engineered with Class 125 leadfree cast bronze
threaded fittings to create a tight seal for an easy installation. Our lead-
free brass fittings and nipples are pressure rated at 125 psi and have sizes
available from 1/8” to 2”. Fittings: AMSE B16.15; Flanges: ASME B16.24 MSS
SP-106; Unions: A-A 059617; Threads: ANSI/NSF Standard 61-Annex G; NSF/ ANSI
Standard 372, ISO9001, CRN
Black Malleable Fittings, Iron Pipe, and Steel Nipples
NDL’s high-quality Class 150 black malleable fittings include elbows, tees,
crosses, plugs, unions, caps, couplings, hex bushings, and floor flanges,
ranging in diameter from 1/8” to 4”. Black welded carbon steel schedule 40
nipples are also available ranging in 15 diameters from 1/8” to 6” – all
different lengths ranging from close up to 72”. Our ready-cut (pre-cut)
nipples are available in black welded carbon steel schedule 40 pipe ranging
from 1/2” to 2” diameter and in lengths from 18” to 72”. Fittings: AMSE B16.3,
B16.14; Unions: B16.39, ASME B1.20.1, ISO, UL, cUL, FM CRN; Schedule 40 Steel
Nipples: AMSE, A733; Threads: ASME B1.20.1, NSF 61 and 372, CRN
PVC SCH 40 Fittings
NDL’s robust Schedule 40 PVC plastic fittings are built for industrial and
residential applications with extreme conditions where lesser-quality products
fail. The smooth inner walls are ideal for low-pressure drops and are
resistant to chemicals and corrosion. Available in diameters 1/2” and up. ASTM
standards D2466, D1784, F1498
PVC DWV Fittings
NDL’s PVC DWV fittings have outstanding rigidity, excellent resistance to
chemicals and degradation, and smooth interior walls prevent scaling and
ensure free flow. Consistent quality and dimensional precision assure a
perfect fit with every single piece. Available in diameters 2” and up. ASTM
standards D2665, D3311, F1498, D1784; and IAPMO
FAST ORDER TURNAROUND
Our Operations Center is strategically located in the Memphis, Tenn. metro
area to streamline delivery and bolster the customer service that NDL is known
for throughout the industry.
We Focus on Fitting Your Needs So You Can Install with Confidence.
We are a forward-thinking, dynamic, global company, leading change with our nimble, progressive approach to HVAC, refrigeration, and plumbing markets. We found a better way to manufacture and test for the highest-quality performance and carve a unique space in a crowded, competitive global market.
- Fast order turnaround
- High-quality control standards for superior fit and finish
- Field-experienced sales and technical support
- Parts packaged in contractor-friendly sized bags
Offering the Same High-Quality Standards with our Plumbing Products.
Building on our success gained from our HVAC-R products, we have grown our
offerings to include plumbing products as well. Consider NDL for copper press,
wrot copper sweat, push-fit, cast sweat fittings, plumbing ball valves, low-
pressure valves, and more.
See all of our plumbing products at ndlinc.com.
NDL-HVACR-PG-5-2022
Explore our full line of high-quality HVAC-R and plumbing products.
ndlinc.com
1-866-635-6888
sles@ndlinc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>