ZYXEL EX5512-TO AX6000 WiFi6 Multi Gigabit Ethernet Gateway User Guide

: June 3, 2024
: ZYXEL

Table of Contents

ZYXEL EX5512-TO AX6000 WiFi6 Multi Gigabit Ethernet Gateway
Quick Start Guide
Package Contents
WiFi Connection A or B
App Management
Safety Warnings
Regulatory Statements
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZYXEL EX5512-TO AX6000 WiFi6 Multi Gigabit Ethernet Gateway

EX5512-TO
AX6000 WiFi6 Multi-Gigabit Ethernet Gateway

Quick Start Guide

A member of the Zyxel MPro Mesh solution family. MPro Mesh Solution:

EX5512-TO
WX5512-TO
MPro Mesh App
Visit www.zyxel.com/us/en for updated information.

Package Contents

ZYXEL-EX5512-TO-AX6000-WiFi6-Multi-Gigabit-Ethernet-Gateway-FIG
1 Hardware Installation

Use the included blue cable to connect the xDSL/cable/fi ber modem’s LAN port to the EX5512-T0’s WAN port as illustrated.
Connect the power adapter to the EX5512-T0 and wait for 2 minutes. Check the EX5512-T0 front panel
The Power(‘) /Internet@} /WANO /2.4G /5G LEDs will light up green as below when the setup is complete.
Note : If the lights do not turn on green, please retryG) @ @ or contact your service provider for assistance.

WiFi Connection A or B

The label on the side of the EX5512-T0 provides 2 ways to connect your wireless device to WiFi: Method A: Scan QR code or Method B: Using SSID

Method A: SCAN QR code to connect WiFi

Check the QR code on the EX5512-TO’s side label, and use your wireless device to scan this QR code.
After scanning the QR code, join this SSID and you can surf the internet.

Using the SSID method to connect WiFi

The WiFi SSID is on the EX5512-TO’s side label
On your wireless device, find this SSI D and enter the Wi Fi Password on your wireless clients and you can surf the internet.

App Management

After successfully surfing the internet, please download the MPro Mesh app to your wireless device to manage your MPro Mesh.
Open this app and enter the EX5512-T0’s seriel number. The seriel number is on the bottom label as below.
Use this app to enjoy the following features:
- Remote Management
- View Home Devices
- Guest Wi-Fi
- Manage Home Wi-Fi Name
- Internet Instant Block
- Add Mesh Extender
- Push Notification

Adding a Wireless Extender

WPS button: If you have a wireless extender you want to add to your EX5512-TO’s WiFi network, press the EX5512-TO button once, and press the WPS button on your extender within 120 seconds to start the WPS process.

Safety Warnings

DO NOT use this product near water, for example, in a wet basement or near a swimming pool.
DO NOT expose your device to dampness, dust or corrosive liquids.
DO NOT store things on the device.
DO NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.
Connect ONLY suitable accessories to the device.
DO NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks.
ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information.
Make sure to connect the cables to the correct ports.
Place connecting cables carefully so that no one will step on them or stumble over them.
Always disconnect all cables from this device before servicing or disassembling.
Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one.
DO NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to a power outlet.
DO NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord.
DO NOT use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.
CAUTION: Risk of explosion if battery (on the motherboard) is replaced by an incorrect type. Dispose of used batteries according to the instructions. Dispose of them at the applicable collection point for the recycling of electrical and electronic equipment. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product.
DO NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
For example, do not place the device in an enclosed space such as a box or on a very soft surface such as a bed or sofa.
The following warning statements apply, where the disconnect device is not incorporated in the equipment or where the plug on the power supply cord is intended to serve as the disconnect device,
for permanently connected devices, a readily accessible disconnect device shall be incorporated external to the equipment;
for pluggable devices, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Caution! The RJ-45 jacks are not used for telephone line connection.

Regulatory Statements

UNITED STATES of AMERICA

The following information applies if you use the product within the USA

FCC EMC Statement

The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
This device has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the devices
Connect the equipment to an outlet other than the receiver’s
Consult a dealer or an experienced radio/TV technician for assistance

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
The following information applies if you use the product with RF function within the USA

FCC Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC regulations restrict the operation of this device to indoor use only.

CANADA

The following information applies if you use the product within Canada area Innovation, Science and Economic Development Canada ICES statement
CAN ICES-003(B) / NMB-003(B)
Innovation, Science and Economic Development Canada RSS-GEN & RSS-247 statement

* This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undeACsired operation of the device.

This radio transmitter (2468C-EX5512T0) has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Antenna information|
---|---

MODEL NAME

|

TYPE

|

MANUFACTURER

|

GAIN

|

CONNECTOR

For indoor use only.
If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz, the following attention must be paid, The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and Where applicable, antenna type(s), antenna models(s), and the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2.3 of RSS 247 shall be clearly indicated. If the produce with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz, the following attention must be paid.
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit

Industry Canada radiation exposure statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 29 cm between the radiator and your body.

See the User’s Guide at www.zyxel.com for more information, including customer support.

Zyxel Communications, Inc 1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
Copyright© 2022 Zyxel and/or its affiliates. All Rights Reserved