Nedis WIFIP121EWT | WIFIP121FWT | WIFIP131FWT | WIFIP131FWT3 Wi-Fi Smart Plug User Manual
- June 5, 2024
- nedis
Table of Contents
WIFIP121EWT | WIFIP121FWT | WIFIP131FWT | WIFIP131FWT3 Wi-Fi Smart Plug
User Manual
Preface
Thank you for purchasing the Nedis WIFIP121EWT/WIFIP121FWT/WIFIP131FWT/WIFIP131FWT3.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is a smart plug that can be controlled remotely.
The WIFIP121EWT / WIFIP121FWT have a power monitor to measure electric power values.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
SmartLife Plug (with power monitor)
---|---
Dimensions (l x w x h)
|
56 x 55 x 79.5 mm
Output power
|
240 VAC ; 16 A, 3680 W
Input AC frequency
|
50 / 60 Hz
Operating temperature
|
-10 °C – 45 °C
Wireless technology
|
Wi-Fi
Wi-Fi frequency
|
2.4 GHz
Frequency range
|
2400 – 2483.5 MHz
Max. radio transmit power
|
16 dBm
Main parts (image A)
A
1. On/off button
2. Indicator LED
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Disconnect the product from the power source and other equipment if problems occur.
- Do not expose the product to water or moisture.
- Only handle the product with dry hands. Handling with wet hands might cause an electric shock.
Explanation of the safety symbols on the product
Icon
|
Description
---|---
|
Indication to warn for electric shock.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Product in which protection against electric shock does not rely on basic insulation only, but which includes an additional safety precaution in such a way that means are provided for the connection of conductive parts (which are not live parts) to the protective (earthing) conductor in the fixed wiring in such a way that these parts cannot become live in the event of a failure of the basic insulation.
Installation
Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Use
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
- You will receive a verification code on your e-mail address.
4. Enter the received verification code.
5. Create a password and tap You will receive a verification code on your e-mail address..
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Connecting the app (image B)
B
1. Control tile
2. Common functions
3. Add product
4. On / off button
- Make sure WiFi is enabled on your smart phone.
- Open the Nedis Smartlife app on your phone.
- Register or login to your account.
- Connect the product to a power outlet.
- Tap + in the top right corner.
- Select the product type you want to add from the list.
- Confirm the blue LED is blinking quickly. If it does not blink, hold the on/off button A1 for 5 seconds and check again.
- Enter the password of the 2,4 GHz Wi-Fi network to which your phone is connected and tap Confirm. The Nedis SmartLife app will now search for the lamp.
- Rename the product after it has been found and added.
If the regular connection method fails, the lamp can be connected using AP mode:
1. Tap + B3.
2. Select the product type you want to add from the list.
3. Select AP Mode in the top right corner.
4. Hold the on/off button 5 seconds to reset it again and confirm the blue LED is blinking slowly.
Maintenance
- Disconnect the product before cleaning.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFIP121EWT / WIFIP121FWT / WIFIP131FWT / WIFIP131FWT3 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
nedis.com/wifip131fwt3#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>