Nedis EXSOC415UFWT Extension Socket User Manual

: June 5, 2024
: nedis

EXSOC415UFWT Extension Socket

Nedis EXSOC415UFWT Extension Socket

User Manual

Preface

Thank you for purchasing the Nedis EXSOC415UFWT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

This product is intended to extend and multiply a single power outlet into four power sockets and two USB ports.

The product is intended for indoor use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Extension Socket

---|---

Article number

|

EXSOC415UFWT

Cable length

|

1.5 m

Specifications (Power sockets)

Input power

|

250 V / 16 A

---|---

Electrical class

|

I

Nominal power

|

Max. 3680 W

IP rating

|

IP20

Specifications (USB ports)

Input power

|

230 V ~ 50 Hz

---|---

Output voltage

|

5 A

Output current

|

2.1 V

Output power

|

10.5 W

Average operation efficiency

|

79.19 %

Efficiency at low load (10 %)

|

73.76 %

No-load power consumption

|

0.08 W

Main parts (image A)

A

1. Power socket

2. USB ports

3. Box

4. Power plug

5. Mounting bracket

6. Mounting plate

7. Screw

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not cover the product.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
Always check that the voltage of the product corresponds to the mains voltage.
Disconnect the product from the power source and other equipment if problems occur.
Do not plug or unplug the power cable with wet hands.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Unplug the product from the power source and other equipment if problems occur.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Product in which protection against electric shock does not rely on basic insulation only, but which includes an additional safety precaution in such a way that means are provided for the connection of conductive parts (which are not live parts) to the protective (earthing) conductor in the fixed wiring in such a way that these parts cannot become live in the event of a failure of the basic insulation.

|

Indication to explain the product is suitable for indoor use only.

Installation

Check the contents of the package

Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Installing the product (image B)

B

It is optional to fasten the product to a table.

Fasten the product in a range of 1.5 meter from the power outlet.

1. Place the mounting bracket A5 and mounting plates A6 on the table.

2. Fasten A5 on the table with A6 and the screws A7.

3. Slide the box A3 inside A5.

The product can be fastened in multiple ways.
To slide A3 out of A5, pull the legs of A5 slightly outwards.

Use

Using the product

Only plug the cable into a wall outlet. Do not use extension cords.

1. Plug the product into a power outlet.

2. Plug the desired cables into the power sockets and/or USB ports of the box.

Maintenance

Disconnect the product from the power source before cleaning.
Do not expose the product to water or moisture.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

1. Clean the product with a dry cloth.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---