Nedis VREP3470AT HDMI extender User Manual

: June 5, 2024
: nedis

Table of Contents

VREP3470AT HDMI extender
Preface
Product description
Safety instructions
Installation
- Connecting the product (image B)
- Connecting infrared for remote control use
Warranty
Disclaimer
Disposal
Declaration of Conformity
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VREP3470AT HDMI extender

Nedis VREP3470AT HDMI extender

User Manual

Preface

Thank you for purchasing the Nedis VREP3470AT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

The Nedis VREP3470AT transfers HDMI signal from one HDMI cable to another through an Ethernet cable.

The included infrared transmitters and receivers transfer infrared signals between the transmitter and receiver.

This allows you to use the remote control of your source device while in range of the receiver.

Intended use

This product is exclusively intended to transfer HDMI signal between two HDMI cables through an Ethernet cable.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

HDMI extender

---|---

Article number

|

VREP3470AT

Dimensions (l x w x h)

|

90 x 63 x 23 mm

Input transmitter / Output receiver

|

HDMI Type A

Output transmitter / Input receiver

|

CAT 5e/6a, RJ-45

Max. supported video format

|

Up to 30 m

|

4K @ 60 Hz

Up to 40 m

|

4K @ 30 Hz

Up to 50 m

|

1080p @ 60 Hz

Main parts (image A)

A

1. Receiver

2. Sender

3. Power supply

4. Infrared transmitter

5. Infrared receiver

Safety instructions

WARNING

Only use the product as described in this manual.
Only use the provided power supply.
Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not immerse the product in water.
Do not unplug the power supply by pulling on the cable. Always grasp the plug and pull.
Do not plug or unplug the power supply with wet hands.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Connecting the product (image B)

B

1. See image B for a connection overview.

2. Insert an HDMI cable into a free HDMI out port of your source device.

3. Insert the other side of the HDMI cable into HDMI In of the sender A 1.

4. Insert an Ethernet cable into CAT Out of A 1.

5. Insert the other end of the Ethernet cable into CAT In of the receiver A 2.

6. Insert the other end of the HDMI cable into a free HDMI in port of your display.

7. Insert an HDMI cable into HDMI Out of A 2.

8. Insert the power supply A 3 into 12V/DC of either A 1 or A 2.

Connect the unit that is most convenient for your setup.
Only one unit has to be connected to the power outlet. The other unit receives power through the Ethernet cable.

9. Insert the other end of A 3 into a power outlet.

Connecting infrared for remote control use

1. Insert the infrared transmitter A 4 into IR Out _ of A 2 ._

2. Insert the infrared receiver A 5 into IR In of A 1.

3. Try to use the remote of your source device when standing near A 1.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product VREP3470AT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/VREP3470AT#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands