Nedis TVWM3551BK Full Motion TV Wall Mount User Manual

June 5, 2024
nedis

TVWM3551BK Full Motion TV Wall Mount

Nedis TVWM3551BK Full Motion TV Wall Mount

User Manual

Preface

Thank you for purchasing the Nedis TVWM3551BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

This product is intended to mount a TV to a wall.

This product is able to swivel for an optimal viewing experience.

The product is intended for indoor use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Full Motion TV Wall Mount

---|---

Article number

|

TVWM3551BK

Screen size

|

37 – 80″ / 93 – 203 cm

Maximum supported weight

|

77 lbs / 35 kg

Maximum VESA

|

200 x 200

300 x 300

400 x 200

400 x 400

600 x 400

Wall distance

|

55 – 330 mm

Rotate

|

180 °

Tilt

|

-15 ° – +15 °

Screen levelling

|

-5 ° – +5 °

Dimensions (l x w x h)

|

430 x 640 x 330 mm

Weight

|

5.9 kg

Main parts (image A)

A

1. Left TV bracket

2. Right TV bracket

3. Bracket mount

4. Base plate

5. Spirit level

6. Safety lock screws

7. Spacers

8. Wall screws

9. Washers

10. M4 x 30 mm bolts

11. M5 x 30 mm bolts

12. M6 x 30 mm bolts

13. M8 x 30 mm bolts

14. M8 x 12 mm bolts

15. M8 x 45 mm bolts

Safety instructions

WARNING

  1. Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
  2. Only use the product as described in this document.
  3. Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  4. Do not drop the product and avoid bumping.
  5. Mount the product on a dry, suitably strong and stable wall.
  6. Do not mount the product on a ceiling.

Installation

  • Check the contents of the package
  • Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Drilling holes (image B)

B

1. Place and hold the base plate A4 and the bracket mount A3 against a wall on the desired position.

  • Mount the product on a dry, suitably strong and stable wall.

2. Use a pencil to mark 4 holes on the wall, through the corners of A4.

3. Remove A3, 4 from the wall.

4. Drill four 60 mm x Ø6 mm holes on the marked locations.

 Spacing tapping screws (image C)

C

1. Use a hammer to insert the wall screws A8 into the holes.

 Mounting the product (image D)

D

1. Unscrew and remove the bolts from A8.

2. Hang A3, 4 on the wall.

  • Place washers A9 between the bolts and A4.

3. Fasten A3 to the wall by screwing the bolts back onto A8.

 Installing brackets on the TV (image E)

E

  • Check the manual of your TV for the appropriate size screws A10 – A15.

1. Place spacers A7 between the TV and the TV brackets A1, A2.

2. Place washers A9 between the scews and A1, A2.

3. Use a screwdriver to fix A1, A2 onto the TV.

  • Make sure the attachment is secure.
 Mounting the TV (image F)

F

  • Use two people to lift the TV.

1. Hang the TV on A3.

2. Fasten A1, A2 to A3 with the safety lock screws A6.

  • Make sure the attachment is secure.

Using the product

1. Tilt, rotate and level the TV wall mount by carefully moving the TV.

Maintenance

  •  Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
  • Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

nedis User Manuals

Related Manuals