Nedis CSWI6002BK 2 -port USB Switch User Manual
- June 5, 2024
- nedis
Table of Contents
CSWI6002BK 2-port USB Switch
User Manual
Preface
Thank you for purchasing the Nedis CSWI6002BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis CSWI6002BK is a 2-port USB switch that allows the use of 1 USB connected device on 2 different devices.
The 2-port USB switch is auto powered, no power supply is needed.
The 2-port USB switch is compatible with USB 1.1 and 2.0.
Intended use
The product is exclusively intended for sharing a single USB-connected device, such as a mobile hard disk or a scanner, between 2 different devices.
The user can switch between devices by pressing the touch switch 2.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
2-port USB switch
---|---
Article number
|
CSWI6002BK
Dimensions (l x w x h)
|
69 x 45 x 23 mm
Input
|
2x USB-B female
Output
|
1x USB-A female
Power
|
No power required
Data rate
|
480 Mbps
Compatibillity
|
USB 1.1 / USB 2.0
Parts List
1. PC 1 output
2. PC 2 output
3. USB port
4. Touch switch selection
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use a damaged product.
- Keep the product out of reach from children.
- Do not expose the product to water or moisture.
- Do not drop the product and avoid bumping.
Installation
- Check the contents of the package
- Check the product for any visible damage. If the product is missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
USB cables are not included and have to be purchased separately.
Connect the 2-port USB switch to the input sources
1. Plug the B-connector of a USB A-B cable into the PC 1 port 1 on the USB switch.
2. Plug the other side of the USB cable into the source.
- Repeat these steps for every source you want to connect.
Connect the 2-port USB switch to the output
1.Plug the A-connector of the USB cable of the device you want to share into the USB port 3 on the USB switch.
2. Plug the other side of the USB cable into the device you want to share.
- If the device you want to share has a male USB A-connector, you can directly plug it into the USB port 3 on the USB switch.
Use
-
Switch on the connected source and devices.
-
Switching between the input sources
-
Switch between the input sources by pushing on the Touch switch 4 on the USB switch.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>