anko 43118007 Bluetooth Micro HIFI System User Manual
- June 5, 2024
- Anko
Table of Contents
USER MANUAL
Bluetooth ®MICRO HIFI SYSTEM
43118007
CAUTION
- The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
- The battery cannot be subjected to high or low extreme temperatures, and low air pressure at high altitudes during use, storage or transportation.
- Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
- Leaving a battery in an extremely high temperature.
- A battery is subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
SAFETY INSTRUCTIONS
CLASS1LASER PRODUCT
CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROL OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
This CD Player adopts a semiconductor unit, not including spare parts for
users to replace. Don’t take apart the machine by yourself to avoid electric
shock. If the machine is damaged, please ask a qualified maintenance worker to
repair it.
POWER
The power of this player should be used corresponding to the information on
the rating label.
VENTILATION
5cm minimum distances around the CD player for sufficient ventilation.
The function of air vent on the main case is to keep CD Player from
overheating. Don’t block or cover the air vent and put the player on the bed
or sofa.
The ventilation should not be impeded by covering the ventilation openings
with items such as newspaper, table cloths, curtains etc.
HEAT SOURCE
The machine should be kept away from the heat sources, such as stoves and
direct sunlight.
NAKED FLAME SOURCE
The machine should be kept away from naked flame sources, such as lighted
candles should be not placed on the machine.
WATER AND MOISTURE
Don’t use this machine in a humid environment, such as a bathroom, kitchen,
humid basement and so on.
Caution :
The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CLEANING
Before cleaning, please put the power off first. Don’t use liquid cleaners or
corrosive fluid to clean the machine, just clean it by a soft cloth.
POWER
While inserting or pulling out the power cord, grip the plug not the wire.If
do not use the machine for a long time, please pull out power cord. To
completely disconnect the power input, the main plug of the machine shall be
disconnected from the mains.
The main plug of the machine should not be obstructed OR should be easily
accessed during intended use.
DISC TRAY DOOR
While closing the disc tray door, keep fingers away from it to avoid being
damaged.
LOADING WEIGHT
Don’t put any heavy objects on the machine in order to keep the machine from
being damaged.
CONNECTING OTHER EQUIPMENT
Before connecting other equipment with the CD Player, make sure to put off the
power. Otherwise, it will make equipment or users damaged.
Radium Laser
While the case is open and the CD Player is working, don’t look at the laser
directly with naked eyes, otherwise, it will have a bad influence on the
eyesight.
DISC
Avoid using the disc which is cracking, deformed or repaired, otherwise, the
machine will appear to malfunction or shorten its usage life.
MALFUNCTION REQUIRING MAINTENANCE
If the following problems appear, please put off the power, and contact the
qualified maintenance worker.
A.The power cord or plug is damaged.
B.Liquid or other foreign matters in the unit.
C.The machine is caught in the rain or watered.
D.While the machine can’t work even according to the manual operation, don’t
press another button which aren’t mentioned on the manual. Otherwise, it will
cause the machine damaged and take the mainantence worker more time to fix .
E.The machine drops from high place.
F.The inner part gives out a burnt smell.
Maintenance
If you are not familiar with the maintenance technical skill of the machine,
don’t try to fix it by yourself.If you open the main case, you might get an
electric shock.If needed, contact the qualified maintenance worker.
SAFETY INSPECTION
After maintenance, request maintenance workers to implement site safety
inspection to make sure the machine works safely.
NOTE: The use of apparatus in moderate climates. Please read the manual
carefully before using the machine, and keep it well for use in the future.
PRECAUTIONS
- When carrying the CD Player, use the original shipping carton and packing materials. It’s the best way to protect the play with the factory package.
- Don’t place the CD Player nearby the volatile liquid, and don’t let the rubber or plastic product to connect with the player for a long time, which will leave traces on the machine cover.
- After working for a long time, the upper cover or rear panel will give out heat, which belongs to normal phenomenon not a malfunction.
- While not using the CD Player, please take disc out and close the disc chamber, then turn off the power.
- While not using the CD Player for a long time, some functional buttons may not work. In order to avoid appearing that phenomenon, advise to use it for a while or pay attention to moistureproof.
LOCATION PRECAUTIONS
While placing the CD Player at the side of TV, Radio or Video Recorder, it may
appear phenomenon like the picture showed not clear or the sound loses true.
Therefore, keep the CD Player away from that kind of equipment.
CLEANING PRECAUTIONS
- Cleaning by a soft cloth
- Using a cloth with a little bit of diluted detergent to wash the stain. Please remind that don’t use any dissolvent such as thinner, gasoline solvents and volatile liquid, for which will damage the player cover.
- Using a chemical-soaked cloth to clean the CD Player, Please wash the player according to the usage instruction.
NOTE: Cleaning and adjusting interior parts have to be operated by a
qualified maintenance worker, otherwise, damage the player or shorten usage
life
DISC USAGE PRECAUTIONS
-
How to get a disc: don’t touch the side of playing
-
Cleaning Disc: clean the disc from the cente to the outside by a soft cloth. If the picture and sound quality was influenced because of fingerprints or dust on the disc, wiping the disc with a wet cloth and then wipe by a dry cloth. Don’t use Dissolved in toluene, detergent or Anti-static spray to wash the disc, or damage it.
-
Storing the disc: placing the disc to the disc box instead of humid or dusty place and direct sunshine place.
BATTERY PRECAUTIONS
If using batteries incorrectly, the battery fluid would leak or the baterry
will be corroded. Therefore, please operate correctly as the following
instruction.
- While putting batteries into a remote control, don’t take anti to the positive and negative polarity of the battery.
- Don’t charge the battery (not rechargeable batteries), disassemble and decompose the battery or put it into fire.
- Don’t use different models of batteries together or new batteries with old ones.
- Don’t leave damaged or dead batteries in the remote control.
- If not using the remote control for a long time, put batteries out to protect it from being damaged for battery fluid leaking.
- If the remote control works abnormally or the effective picture narrows, replace new batteries.
- If battery fluid leaks, clean the battery case first and then replace new battery.
REMOTE CONTROL PRECAUTIONS
If using the remote control incorrectly,it would appear that the CD Player
reception is not good enough or there is no reception. Therefore, please use
it correctly as following instructions.
- Keeping remote control launch head from eing illuminated directly ban y intensive ligh source like sunlight, which leads to no reception or bad reception.
- Put the remote control aim at the receiving window on the CD Player.
- Don’t drop the remote control or shock intensively.
- Don’t put water or other liquids into the remote control.
- Don’t take apart the remote control.
NOTE:
- Keep the distance of about 7 meters between the remote control and the CD Player.
- Keep Omni bearing 30 degrees from the remote to receiving window.
- Put the batteries into the battery case of the remote control, and then operate it.
PANEL INSTRUCTION
FRONT PANEL FUNCTION
1. Tone Switching button
2. Function Switching button
3. Power ON/OFF button
4. Display Screen
5. CD Door Open/Close button
6.Volume+ & Next Track button| 7.Volume+ & Previous Track button
Directly press to increase the volume
Long press switch to the previous track
8.Play/Pause Button
Directly press to decrease the volume
Long press switch to next track
9.CD Door
10.USB Input Jack
---|---
REAR PANEL FUNCTION
- Audio L & R channel Output
- LINE Input
- FM Radio Antenna Jack
- Wire Connector Clamp for Speakers
REMOTE CONTROL
1. Power Standby Function key
2. Number Function key
3. Forward Function key
4. Reverse Function key
5. Play/Pause Function key
6. Stop Function key
7. FM Radio Function key
8. Single Track Copy Function Key
9. Volume – Function key
10. Mute Function key
11. Function Key
(switch between Bluetooth, CD, FM, LINEe)
12.All Tracks Copy Function
13.Bass – Function key
14.Bass + Function key| 15. Channel Switch
16. Display Function key
17. Disc Chamber Function key
18. Go/To Function key(only for FM)
19. Previous Function key
20. Next Function key
21. Audition Function key
22. Radio Search Function key
23.Volume + Function key
24. SOURCE Function Key
switch between CD / USB and SD mode
25.Treble + Function key
26.Treble – Function key
27. On-Screen Display Function key
28. Repeat Function key
---|---
GET STARTED
Caution
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Connect power
Caution
Risk of product damage! Ensure that the power supply voltage corresponds to
the voltage printed on the back or the underside of the unit.
- Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
- Before you connect the AC power cord, make sure that you have completed all other connections.
Connect the power cable to the wall socket
Prepare the remote control
To insert the remote control batteries:
- Open the battery compartment.
- Insert 2 x AAA batteries with correct polarity(+/-) as indicated. The 2 x AAA battery not include in our products, please purchase from Authorized Seller.
- Close the battery compartment.
- The batteries not including in the accessories of goods.
Please Note:
- If you are not going to use the remote for a long time, remove the batteries.
- Do not use old and new or different types of batteries in combination.
- Please attention should be drawn to the environmental aspects of battery disposal, as contains chemical substances, so they should be disposed of properly.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
How to Turn on the unit
- Connect the AC power cable and plug to the wall socket;
- Press the “POWER” button on the front panel or the” ” function on the remote control to start the player .
- Press the “POWER” button on the front panel or the” ” function key on the remote control again to close the player.
Caution:
If you do not use this player for a long time, please press the “POWER”button
and disconnected the AC power of this player.
BASIC OPERATION
VOLUME ADJUSTMENT
Press on the front panel or VOL-/VOL+ on the remote control to adjust volume.
TONE SETUP
-
Bass Setup: Press BASS-/BASS+ on the remote control to turn down or up Bass (between -14 and +14)
-
Treble Setup: Press TREBLE-/TREBLE+ on the remote control to turn down or up Treble (between -14 and +14).
-
Dual Mono: Press MODE on the remote control, there are three kinds of sound output to be selected: CH L, CH R and L R (stereo) .
-
DSP Setup: Press DSP on the remote control, then there are four kinds of different sound effects to be chosen.
CD PLAYER
Press the”Power” button on the front panel to be energized, and press on the
front panel or on the remote control to make the Disk tray open, then put Disc
correctly, and press the again, then play the Disc automatically after several
seconds.
PLAY PAUSE STOP
While playing, press on the front panel or on the remote control to stop for a
while, then the Disc will be paused to play. Press once more, the Disc resumes
to play. While playing, press on the remote control to stop, then the Disc
will be paused to play.
Press once more, the Disc restars to play.
PREVIOUS NEXT
While playing, long press on the front panel or on the remote control to the
previous chapter played.
While playing, long press on the front panel or on the remote control to the
next chapter.
RADIO OPERATION
SETUP
When you want to listen to the radio program, put the radio antenna into the
antenna jack on the rear panel, and press the “FUNCTION” button to switch to
FM mode on the front panel or on the remote control. The CD player will turn
to FM radio mode, and long press or SEARCH button to search radio channels
automatically between 87 MHz and 108 MHz. After searching, the CD Player will
save the radio channel automatically. BASIC OPERATION
- When you are listening to the radio program, press the MODE button on the remote control, then you can swift the Channel between stereo and mono lang.
- When you are listening to the radio program, press on the remote control to the nex channel; press on the remote control to the previous channel.
- When you are listening to the radio program, press on the remote control to search channels up and down.
AUDIO OUTPUT AND INPUT
Audio output instruction
(Audio output function only apply for CD and USB mode.)
Use the connecting wires of left and right to connect the out terminal of this
CD player and the audio input terminal of other AMP( amplifier).
LINE IN instruction
Listen to the external audio device
The unit can be used as a power amplifier to play the tracks from an external
audio device.
You can listen to an external audio device, such as MP3
player/Mobile/Computer/TV through this unit.
- Press the FUNCTION button on the front panel or press the FUNCTION button on the remote control. “LINE IN” will display on the screen.
- Connect the external device into the unit’s LINE IN jack on the rear panel with line cable.
- Play the tracks from the external audio device.
BLUETOOTH OPERATION
- Press the “POWER” button to turn on the player;
- Press the “FUNCTION” button on the player panel or on the remote control to switch Bluetooth mode; and ” ” display on the screen;
- Switch on your Bluetooth device and search for 43118007 and connect it.
- Once connected successfully, a small connection notification tone is heard from the player.
- Use / and button to control the tracks.
USB OPERATION
BASIC OPERATION
When Playing the chapters in USB , the other steps are the same as the basic
operation of CD Player(please check the page 7). If you want to change CD
function and USB function, please press the SOURCE KEY on the front panel or
on the remote control.
Convert CD to MP3
Insert a USB drive to the USB port. Press Track COPY to convert a single track
or ALL COPY to record the full disc.
- While playing a CD track , insert a USB drive to the USB port. Press Track Copy on the remote control to record a single track.
- While playing a CD, insert a USB drive to the USB port. Press All Copy to record the full disc.
TROUBLESHOOTING
TROUBLE SHOOTING
Breakdown guide Before service, please nspects the question below
Phenomenon | Cause | Measurement |
---|---|---|
No power | Disconnect the power plug | Connect the power plug right |
Don’t work after being energized | No Disc | Put Disc into the CD player |
No sound | Not connecting to the right jack | connecting to the right jack |
Disconnect the Audio Input lines | connect the Audio Input lines | |
Equipment connected doesn’t work or Volume is 0 | Make Equipment connected work |
or turn the volume up
Remote control out of order| Not aiming to the receiving window| aiming to the
receiving window
The distance between the remote control and receiving window| Operating within
7meters
The battery of remote control run out of electricity| Replace new batteries
MP3 without sound or with noise| Disc has other modes files| Jump those files
SPECIFICATION
The Main Technical Parameter
Item | Parameter |
---|---|
Output | Frequency: 2 sound channel independent output |
Disc supported | MP3 |
CD
CD-R. CD-RW
Audio characteristic| Frequency response : 20Hz – 20KHz
Signal to noise ratio:?..80dB
Total harmonic distortion:<0.01%
Output power
(RMS)| 30W
Supply voltage| AC 220V-240V 50Hz
Measurement
of CD Player (MM)| Main Unit:170x203x140 MM Speaker:110x203x140MM
Temperature| -1 or -+ sac
Humidity| 15-75%( without the waterdrop)
Accessories| Remote control, Manual, LINE IN Cable, FM Radio Antenna
WARRANTY
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at Kmart.com.au for any difficulties with
your product. Warranty claims and claims for expenses incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>