outline UB-ARN215CX U-Shape Bracket User Manual
- June 5, 2024
- outline
Table of Contents
outline UB-ARN215CX U-Shape Bracket
SAFETY REGULATIONS
Please read this manual carefully and in its entirety. It contains important information regarding safety issues, including guidelines for general safe use of rigging systems as well as advisories on government regulations and liability laws. The suspension of large, heavy objects in public places is subject to numerous laws and regulations at the national/federal, state/provincial, and local levels. The user must assume the responsibility for making sure that the use of any rigging system and its components in any particular circumstance or venue conform to all applicable laws and regulations in force at the time.
GENERAL SAFETY RULES
- Carefully read this manual in all its parts
- Respect the working load limits and maximum configurations of the elements and of any third-party component (such as suspension points, motors, rigging accessories, etc…)
- Do not incorporate any accessory not provided by Outline; all damaged or defective components must be replaced only by equivalent parts approved by Outline
- Ensure personnel health and safety, ensure that no one is standing below the system during the installation, ensure that all personnel involved in the installation are equipped with personal safety devices
- Always double check that the elements are correctly connected before suspending the system.
The rigging elements are easy to use, however the installation shall be
carried out only by qualified personnel that are familiar with the rigging
techniques, safety recommendations and with the instructions described in this
manual.
All mechanical components are subject to wear and tear over prolonged use as
well as corrosive agents, impacts or inappropriate use. For this reasons users
have the responsibility to adopt and adhere to a schedule of inspections and
maintenance. Key components (screws, connecting pins, welded points, rigging
bars) must be inspected before every use. Outline strongly recommends to
carefully inspect the system components at least once a year, reporting in a
written document the date, the name of the inspector, the points checked and
any anomalies discovered.
CONFORMITY AND WARRANTY
All Outline electro-acoustic and electronic devices are in conformity with the provisions of EC/EU directives (as stated in our CE declaration of conformity).
The CE declaration of conformity is attached to the product warranty certificate and is shipped with the product.
INSTRUCTIONS
UB-ARN215CX is intended to safely support Monaco 215 CX and Arena, any other
use (including suspending more speakers or adding more load by placing weight
on the loudspeaker itself, etc…) is absolutely forbidden.
This bracket allows to mount and set the loudspeaker cabinet to various
angles. It can be mounted directly on wall, ceiling or any other suitable
surface, or even on a truss using a clamp.
Tools required:
- Wrench size #17
Remove the KERL M10 from the bracket simply by unscrewing the withknob, Attach the clamping area to the rail system’s first hole and lock it with the appropriate ring nut provided by Outline (circled in red). Use the wrench (#17) to tighten it,Fix the bracket to wall, ceiling or suitable structure. There are five mounting holes for this purpose. If you are using the clamp, we suggest you use the central hole. Please Note that the screws for wall mounting are not provided.
Remove the pin to move and open the arm, Attach the cabinet to the bracket,
first insert the lower part with the pole into the bottom hole of the cabinet,
Close the other side of the bracket. It is very important that the buffer for
flange positioning is inside the rail as shown by the arrow in the figure.
Then screw the Kerl M10 knob into the threaded pin,
Set the angles as desired and tighten the withknobs.
Outline carries out on-going research for product improvement. New materials,
manufacturing methods and design upgrades are introduced to existing products
without prior notice as a routine result of this phi-losophy. For this reason,
any current Outline product may differ in some aspect from its description,
but will always equal or exceed the original design specifications unless
otherwise stated.
© Outline 2021
Operating manual product code: Z OMUB-ARN215CX Release:20210914
Printed in Italy
Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it
OUTLINE S.R.L.
Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy