Nedis CSPL5902BK 2 -port VGA Splitter User Manual
- June 5, 2024
- nedis
Table of Contents
CSPL5902BK 2-port VGA Splitter
User Manual
Preface
Thank you for purchasing the Nedis CSPL5902BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis CSPL5902BK is a 2-port VGA splitter that can distribute VGA output to up to 2 displays simultaneously.
The 2-port VGA splitter supports a 1920 x 1080 resolution and is compatible with multiple resolutions downwards.
The signal of the 2-port VGA splitter can be extended by 5 – 20 meters, using standard 3+6VGA cables.
The 2-port VGA splitter supports plug and play.
Intended use
The product is exclusively intended as a splitter for VGA input.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
2-port VGA splitter
---|---
Article number
|
CSPL5902BK
Dimensions (l x w x h)
|
132 x 77 x 45 mm
Resolution
|
1920 x 1080
Power
|
5V DC
Input
|
1x VGA HD 15-pin female
Output
|
2x VGA HD 15-pin female
Bandwidth
|
250 MHz
Parts list
1. VGA IN
2. VGA OUT
3. DC connector
4. LED light
5. Power adapter
6. Power plug type C
7. Power plug type G
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use a damaged product.
- Keep the product out of reach from children.
- Do not expose the product to water or moisture.
- Disconnect the product from the electrical outlet and other equipment if problems occur.
- Do not drop the product and avoid bumping.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Installation
- Check the contents of the package
- Check that all parts from the parts list are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Connect the 2-port VGA splitter to the input source
- Make sure the device you want to connect has been turned off.
1. Plug a VGA cable to the VGA IN port 1 on the VGA splitter.
2. Plug the other side of the VGA cable to the source.
- The source can be any device with a VGA OUT port.
Connect the 2-port VGA splitter to the output(s)
- Make sure all the devices you want to connect have been turned off.
1. Plug a VGA cable to the VGA OUT port 2 on the VGA splitter.
2. Plug the other side of the VGA cable to the output display.
- Repeat these steps for every display you want to connect.
Connect the power plug to the power adapter
1. Place the power plug 67 you want to use on the power adapter 5.
2. Twist the power plug clockwise to secure it.
Connect the 2-port VGA splitter to the mains
1. Plug the power adapter 5 to the VGA splitter 3.
2. Plug the power adapter to the mains.
- The LED light 4 turns on, indicating the VGA splitter is working.
Use
- Switch on the source and connected display(s).
- The input source will now be shown on the connected displays.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>