MONSTER MH11903 Champion AirLinks Earphone User Guide
- June 5, 2024
- Monster
Table of Contents
MONSTER MH11903 Champion AirLinks Earphone
Please read this Quick Start Guide carefully and keep it for future use.
PARTS
- SportClip™
- Multi Function Button (MFB）
- Charging Contacts
- Eartips
- Charging Case – Battery level LED Indicator
- Charging Case Charging Port
Product Overview
- Earphones (Le & Right)
- Charging Case
- SportClip™ x 1 Pair (Installed)
- Eartips x 3 Pairs (S, M & L)
- USB Type-C Charging Cable
- Quick Start Guide & Warranty letter
Power On/Off
Take the earphones out of the charging case, and the earbuds will be
automatically power on. When the earbuds is power on, put the earbuds into the
charging case, and the earbuds can be power off and charging.
Experiment with the different sizes of ear tip to find your perfect fit.
Twist the earphone until it fits securely and comfortably.
Pairing
Remove earphones from charging case, the earphones will turn on automatically. Le and right earphones will be connected automatically. Wait for a few seconds, “pairing” voice prompt will be heard.For new device connection, go to the Bluetooth settings on your mobile device and set it to search for new devices (new Monster device). Once the earphone is paired, you will hear “connected”.
Volume Control
Volume down: quickly double press the MFB on the left earphone during music
streaming
Volume up: quickly double press the MFB on the right earphone during music
streaming
Calling
Answer/End Call: short press MFB button to answer/end the phone call
Reject Call: long press MFB button about 2 seconds to reject phone call
Music
Play/Pause: press MFB once to play/pause music
Track forward: press and hold MFB on right earphone for about 2 seconds
Track backward: press and hold MFB on left earphone for about 2 seconds
Voice Control
After connecting to the phone, quickly double press the MFB to activate the
voice assistant.
Reset
Manually turn off Right/Left earbuds, simultaneously long-press Right/Left
earbuds for 8 seconds, you will see blue LED indicator stays on about 1
second, and hear voice prompt “Toot toot”, then the earbuds will reset
automatically and enter TWS pairing mode for a few seconds, finally it will be
available to connect with other devices.
LED Indicator Guide
| Status | DESCRIPTION | Voice Prompt |
|---|---|---|
| Power On | Blue LED indicator stays |
On about 1 second
| “Power On”
Power Off| Blue LED indicator stays
On about 1 second
| “Power Off”
Pairing| Blue LED indicator flashes continuously| “Pairing”
Connect| LED indicator is off /| “Connected”
| goes out|
---|---|---
Reset| Blue LED indicator flashes
three times quickly
|
Charging –
Earphones
| Blue LED indicator
stays On
| ****
–
Charging – Charging Case| Battery level LED Indicator flashes while charging. When battery level LED indicator is off,
it is fully charged.
| ****
–
Caution
- when earphone falls into water ,please take it out and wipe the water then put into the charging box. Notice : earbuds will be damaged when there is water on the earphone
- Please fully charge before using.
- When you unbox the headphones and power it on for the first time, it will enter to pairing mode automatically.
- Charge in a right place and environment.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>