iRobot Roomba j6+ Robot Vacuum Owner’s Guide

iRobot Roomba j6+ Robot Vacuum Owner’s Guide

Safety Information

Important Safety Instructions

This Owner’s Guide includes information for Regulatory Model(s): RVE-Y1, ADG-N1

SAVE THESE INSTRUCTIONS
WARNING: When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USE
WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using, and maintaining your robot. This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be carried out by children without supervision.  This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING: Indicates a hazardous situation that, if not avoided, could result in serious injury or death.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage.

GENERAL
WARNING

• Your robot comes with a region-approved power supply cord and is designed to be plugged into a standard household AC power outlet only.
• Do not use any other power supply cord. For replacement cords, please contact Customer Care to ensure proper selection of country-specific power supply cords.
• Do not open your robot or dirt disposal other than instructed in the Owner’s Guide. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
• Risk of electric shock, use indoors in a dry location only.
• Do not handle your robot or dirt disposal with wet hands.
• Do not use unauthorized chargers. The use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire or explode.
• Your robot is not a toy. Small children and pets should be supervised when your robot is operating.
• Do not sit or stand on your robot or dirt disposal.
• Store and operate your robot in room-temperature environments only.
• If the room to be cleaned contains a balcony, a physical barrier should be used to prevent the robot access to the balcony and ensure safe operation.
• Clean cliff sensors for buildup.
• If the room to be cleaned contains equipment, such as a stove, fan, portable heater, or humidifier, remove the equipment before operation.
• There is a risk of injury, accident, or malfunction if the robot comes in contact with and pushes the equipment.
• This robot is intended for dry floor use only. Do not use this device to clean up spills. Do not allow your robot or charging station to become wet.

CAUTION

• Do not operate the robot in areas with exposed electrical outlets on the floor.
• Do not use this device to pick up sharp objects, glass, or anything that is burning or smoking.
• Be aware that the robot moves on its own. Take care when walking in the area that the robot is operating in to avoid stepping on it.
• If the device passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf.
• Before using this device, pick up objects such as clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects. Extinguish candles. Shut off portable heaters.
• Perform the required maintenance as per the Owner’s Guide to ensure the safe operation of the robot and dirt disposal.
• If the robot is operating on a floor with stairs, please remove any clutter from the top step.

NOTICE

• Do not place anything on top of your robot.
• Failure to maintain the cleanliness of charger contacts could result in a loss of ability for the robot to charge the battery.
• Before running your robot on hard floors, please test your robot on a small section of the hard floor to ensure that it is compatible.
• Using your robot on a hard floor that is not compatible could result in damage to your floor. Contact your hard floor manufacturer with questions on compatibility.
• Before running your robot on carpets or rugs, ensure that the carpets or rugs are compatible with the dual multi-surface rubber brushes on your robot, otherwise known as beater bars.
• Using your robot on a carpet or rug that is not compatible could result in damage to your carpet or rug.
• Contact your carpet or rug manufacturer with questions on compatibility.

BATTERY
WARNING

• Do not open, crush, heat above 176°F: 80°C or incinerate
• Follow the Owner’s Guide instructions for proper use, maintenance, handling, and disposal.
• Do not short-circuit the battery by allowing metal objects to contact battery terminals or immerse in liquid. Do not subject batteries to mechanical shock.
• Lithium-ion batteries and products that contain lithium-ion batteries are subject to stringent transportation regulations.
• If you need to post this product (with the battery included) for service, travel, or any other reason, you MUST refer to the Troubleshooting section of your manual or contact Customer Care for postage instructions.
• Periodically inspect the battery pack for any sign of damage or leakage.
• Do not charge damaged or leaking battery packs and do not allow the liquid to come in contact with skin or eyes.
• If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Place the battery in a sealed plastic bag and recycle or dispose of it safely according to local environmental regulations, or return it to your local authorized iRobot Service Centre for disposal.

CAUTION

• Battery usage by children should be supervised. Seek medical advice immediately if a cell or a battery has been swallowed.
  NOTICE

• The battery pack must be removed from the robot before recycling or disposal.

• For best results, only use the Lithium Ion Battery that comes with the robot.

• Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product. For replacement, purchase an identical iRobot battery or contact iRobot Customer Care for alternative battery options.

• Always charge and remove the battery from your robot and accessories before long-term storage.

AUTOMATIC DIRT DISPOSAL
WARNING

• Do not use it if the cord or plug is damaged. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

• Always disconnect your robot from the dirt disposal before cleaning or maintaining it.

• Do not use the dirt disposal as a step.

• Do not put any objects into openings. Do not use any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

• To properly maintain your dirt disposal, do not place foreign objects inside, and ensure that it is clear of debris.

• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

• Do not allow liquids to get on or into your dirt disposal.

• Do not pour any liquids into the device and do not immerse in water.

• Do not use it outdoors or on wet surfaces.

• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual.

• To reduce the risk of electric shock, unplug your dirt disposal before cleaning it.

• Keep the dirt disposal and power cord away from heated surfaces.
  NOTICE

• The product may not be used with any type of power converter.

• The use of power converters will immediately void the warranty.

• If you live in an area prone to electrical storms, it is recommended that you use additional surge protection. Your dirt disposal may be protected with a surge protector in the event of severe electrical storms.

• Do not use without a dust bag and/or filters in place.

This symbol on the battery indicates that the battery must not be disposed of with unsorted common municipal waste. As the end user, it is your responsibility to dispose of the end-of-life battery in your appliance in an environmentally sensitive manner as follows:
(1) returning it to the distributor/dealer from whom you purchased the product; or
(2) depositing it in a designated collection point
The separate collection and recycling of end-of-life batteries at the time of disposal will help to conserve natural resources and to ensure that it is recycled in a manner that protects human health and the environment. For more information, please contact your local recycling office or the dealer from whom you originally purchased the product. Failure to properly dispose of end- of-life batteries may result in negative potential effects on the environment and human health due to the substances in the batteries and accumulators. Note: For battery recycling go to call2recycle.org; or call 1-800-822-8837

About your Roomba® Robot Vacuum

About Your Clean Base™ Automatic Dirt Disposal

Using your Roomba® Robot Vacuum

Positioning the Clean Base™ Automatic Dirt Disposal

Note: Do not place your Clean Base Automatic Dirt Disposal indirect sunlight. Ensure that the area around the dock is free of clutter to improve docking performance.

WARNING: To prevent the risk of your robot falling downstairs, ensure that the charging station is placed at least 4 feet (1.2 meters) away from stairs

Download the iRobot Home App and connect to Wi-Fi®

• Follow the step-by-step instructions to set up your Roomba.
• Set up PrecisionVision Navigation to avoid obstacles in real time.
• Set an automatic cleaning schedule and customize cleaning preferences.
• Create smart maps to tell your robot where and when to clean.

Charging

Place the robot on the charging station to activate the battery.

Note : Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job.

• The robot uses a small amount of power whenever it is at the charging station.
• You can put the robot in a further-reduced power state when not in use. To put your robot into Reduced Power Standby Mode, remove the dust bin and tap the clean button 5 times.
• Reduced Power Standby Mode, place your robot on the charging station and tap the clean button. For more details on this Reduced Power Standby Mode, refer to the FAQ page on our website.
• For long-term storage, turn off the robot by removing it from the charging station and holding down the clean button for 3 seconds with one wheel off the ground. Store the robot in a cool, dry place.

Cleaning

• Your robot will automatically explore and clean your home in neat rows, avoiding obstacles using its front-facing camera. It will return to the charging station at the end of a cleaning job and whenever it needs to recharge.
• To end a job and send the robot back to its charging station, hold the clean button down for between 2-5 seconds. A blue light ring pattern will indicate that the robot is seeking the charging station.
• When your robot detects an especially dirty area, it will engage in Dirt Detect™ mode, moving in a forward/backward motion to clean the area more thoroughly. The light ring indicator will flash blue.

Troubleshooting

• Your robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press the clean button or tap the bumper for details. Check the iRobot Home App for further support
• After 90 minutes of inactivity off the charging station, the robot will automatically end its cleaning job.
• To factory reset your robot, remove the Dust Bin and hold down the clean button for seven (7) seconds. A sound will let you know when the factory reset has been completed. Press down the clean button once
  more to confirm

Battery safety & shipping
For best results, only use the Lithium Ion Battery that comes with your robot.

WARNING : Lithium-ion batteries and products that contain lithium-ion batteries are subject to stringent transportation regulations. If you need to ship this product for service, travel, or any other reason, you MUST follow the shipping instructions below.

• The battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station and holding down the clean button for 3 seconds with one wheel off the ground.
• All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit global.irobot.com.

About your Automatic Dirt Disposal
While cleaning, your robot will automatically return to the dirt disposal to empty its bin and recharge as needed. The dirt disposal’s LED indicator will turn solid red when a new bag is needed. If a clog is detected, the dirt disposal will trigger additional attempts to automatically clear the clog.

Note: If you place your robot on the dirt disposal by hand, it will not empty automatically. In this case, use the iRobot Home App or hold the button down for 2-5 seconds.

Care and Maintenance

Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on the following pages. There are additional instructional videos in the iRobot Home App. If you notice the robot picking up less debris from your floor, empty the bin, clean the filter and clean the brushes

Every 2 months
Full Bin Sensor| Clean every 2 weeks|
Front Caster Wheel| Clean every 2 weeks| Every 12 months
Edge-Sweeping Brush and Multi-Surface Brushes| Clean once a month (twice a month if you have a pet)| Every 12 months
Sensors and Charging Contacts| Clean once a month|
Camera Window| Clean and inspect once a month|
Bags| | Bags should be replaced when prompted by the LED indicator/app.
Dock Charging Contacts and Visual Docking Target| Once every month|
Blower Cover inside canister| Once every month (remove debris from blower cover)|

Note: iRobot manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact iRobot Customer Care for more information.

Emptying the Bin

1. Press the bin release button to remove the bin.
2. Open the bin door to empty the bin.
3. Place the bin back in the robot.

Cleaning the Filter

1. Remove the bin. Remove the filter by grasping both ends and pulling it out.
2. Remove debris by tapping the filter against your trash container.
3. Reinsert the filter with ridged grips facing out. Place the bin back in the robot.
   Important: The robot will not run if the filter is not installed correctly. Replace the filter every two months.

Cleaning the Full Bin Sensors

1. Remove and empty the bin.
2. Wipe the inner sensors with a clean, dry cloth
3. Wipe the bin door with a clean, dry cloth
4. Clear any debris from the vacuum path.

Washing the Bin
Important: Do not wash the filter. Remove the filter before washing the bin.

1. Release the bin, remove the filter, and open the bin door.
2. Rinse the bin using warm water.
3. Make sure that the bin is completely dry.
4. Reinsert the filter and place the bin back in the robot

Cleaning the Edge-Sweeping Brush

1. Use a coin or small screwdriver to remove the screw holding the Edge-Sweeping Brush in place.
2. Pull to remove the Edge-Sweeping Brush.
3. Remove any hair or debris, then reinstall the brush.

Cleaning the Front Caster Wheel

1. Pull firmly on the front wheel module to remove it from the robot.
2. Pull firmly on the wheel to remove it from its housing (see illustration below).
3. Remove any debris from inside the wheel cavity.
4. Reinstall all parts when finished. Make sure the wheel clicks back into place

Important: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care.

Cleaning the Multi-Surface Brushes

1. Pinch the brush frame release tab, lift the tab, and remove any obstructions.
2. Remove the brushes from the robot. Remove the brush caps from the ends of the brushes.
3. Remove any hair or debris that has collected beneath the caps. Reinstall the brush caps.
4. Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
5. Reinstall the brushes in the robot. Match the shape of the brush pegs with the shape of the brush icons in the cleaning head module.

Removing Debris from
Blower Cover

Inspect the blower cover for any lint or debris build-up, and wipe with a clean dry cloth to remove

Cleaning the Visual Docking Target
Sensors and Charging Contacts

1. Wipe sensors and charging contacts with a clean dry cloth. You can alternately use a pad of melamine foam to remove built-up debris on the robot and CleanBase charging contacts.
2. Inspect the visual docking target and charging contacts to make sure that they are clear of debris. Wipe with a clean, dry cloth.
   Note : Do not spray cleaning solution directly onto sensors or into sensor openings.

Replacing the Bag

1. Lift up on the canister lid to open it.
2. Pull up on the plastic card to remove the bag from the canister
3. Discard the used bag.
4. Install a new bag, sliding the plastic card into the guide rails.
5. Press down on the lid making sure that it is completely closed.
   Note: To achieve optimal performance with your robot and automatic dirt disposal, clean and/or replace your robot’s filter as needed.

Troubleshooting

Your dirt disposal will tell you if something is wrong via an LED indicator on the front of the canister and through the iRobot Home App. This product has been equipped with a thermal protector designed to
protect against damage due to overheating. If the protector operates, the motor will stop running. If this happens, unplug the unit, and allow it to cool for 30 minutes, clear any obstructions from the evacuation port and evacuation tube, then plug the unit back in.

2. Make sure that the bag is securely inserted.

3. If problem persists, remove any debris from the port on the bottom of your robot and the dirt disposal.

Blinking red| There is a leak or a clog in the dock evacuation path| 1. Make sure that the canister lid is pushed down and firmly sealed. Hold the clean button on your robot down for 2 seconds to manually empty the bin.

2. Remove any debris from the port on the bottom of your robot and dirt disposal.

3. Unplug the dirt disposal from the wall. Place it on its side and inspect the debris evacuation tube for debris. If necessary, remove the tube to clear any debris.

iRobot Customer Care
USA & Canada
If you have questions or comments about your Roomba® robot vacuum, please contact iRobot before contacting a retailer. You can start by visiting global.irobot.com for support tips, frequently asked questions, and information about accessories. This information can also be found in the iRobot Home App. If you need further assistance, call our Customer Care team at (877) 855 8593.

iRobot USA Customer Care Hours

• Monday to Friday, 9 AM-9 PM Eastern Time
• Saturday and Sunday 9 AM-6 PM Eastern Time
• Outside USA & Canada Visit global.irobot.com to:
• Learn more about iRobot in your country
• Get hints and tips to improve your Roomba® robot vacuum’s performance
• Get answers to questions
• Contact your local support center

Regulatory information

FCC Supplier’s Declaration of Conformity
iRobot Corporation Roomba Model: RVE-Y1 Contains FCC ID: UFE-AXGY1 and contains IC: 6652A-AXGY1 This device complies with part 15 of the FCC Rules and ICES-003. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by iRobot Corporation could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules as well as ICES-003 Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference in radio communication will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than necessary for successful communication.

FCC Radiation Exposure Statement: This product complies with FCC §2.1091(b) for mobile device RF exposure limits, set forth for an uncontrolled environment and is safe for the intended operation as
described in this manual. Per FCC requirements, maintain a distance of more than 8 inches (20 cm) between any person and the host device (Roomba robot).

ISED Radiation Exposure Statement: This product complies with the Canadian Standard RSS-102 for mobile device RF exposure limits, set forth for an uncontrolled environment, and is safe for the intended
operation as described in this manual. Per ISED requirements, maintain a distance of more than 8 inches (20 cm) between any person and the robot. iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA.
http://global.irobot.com For battery recycling go to call  or call 1-800-822-8837
Download PDF: iRobot Roomba j6+ Robot Vacuum Owner’s Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>