SRP COMPANIES EWL-23160-A Mgntc Wireless Charging User Manual

SRP COMPANIES EWL-23160-A Mgntc Wireless Charging

Product Information

Specifications

• Product Name: 24/7 LIFE MGNTC WRLSCHRGR (EWL-23160-A)
• Compatibility: All devices with wireless charging capability
• FCC Compliance: Class B digital device, Part 15 of the FCC Rules
• Radiation Exposure Limits: Complies with FCC limits for an uncontrolled environment
• Minimum Distance: 20cm between the radiator and your body

Product Usage Instructions

• Step 1: Compatibility Check
  Before using the wireless charger, ensure that your device has wireless charging capability. This charger is only compatible with devices that support wireless charging.

• Step 2: Placement
  Place the wireless charger on a flat and stable surface. Make sure no objects are obstructing the charging area.

• Step 3: Power Connection
  Connect the included power adapter to the wireless charger. Plug the adapter into a standard power outlet.

• Step 4: Charging Your Device
  Follow the steps below to charge your device:

1. Ensure your device is compatible with wireless charging and has its wireless charging feature turned on.
2. Place your device in the center of the wireless charger’s charging area.
3. The charger will automatically detect your device and initiate charging.
4. An LED indicator on the charger will light up to indicate that charging is in progress.
5. Once your device is fully charged, the LED indicator will turn off.

• Step 5: Removing Your Device
  To remove your device from the wireless charger, simply lift it off the charging area. Ensure that you do not apply excessive force or twist the device while removing it.

Instructions for use

EWL-23160-A supports wireless charging function, in line with the Qi wireless charging standard: achieve moment distance radio energy transmission through magnetic induction, and any electronic device that meets the Qi standard can be charged using the EWL-23160-A wireless charger; When using the QC2.0 standard, the wireless charger supports 15W load; Overcharge protection, overvoltage protection (12V) and overcurrent protection (2A);

Installation

1. Connect the USB-C at the other end of the wireless charging data cable to the power supply;

2. Just put the QI-compatible electronic device on the charging pad, and it will charge the device immediately.

Note: All devices must have wireless charging capability

FCC Statement

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

User manual
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FAQ

• Q: Can I use this charger with devices that do not support wireless charging?
  A: No, this charger is only compatible with devices that have wireless charging capability.

• Q: Can I use my device while it is charging on the wireless charger?
  A: Yes, you can use your device while it is charging on the wireless charger. However, keep in mind that using power-intensive apps or activities may slow down the charging process.

• Q: Is it safe to leave my device on the wireless charger overnight?
  A: Yes, it is safe to leave your device on the wireless charger overnight. The charger is equipped with overcharge protection to prevent any damage to your device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>