Rasonic RLF-9KITD Living Fan User Manual

Rasonic RLF-9KITD Living Fan

Precautions

Safety Precautions (Please read carefully and follow this safety precaution)

• Please observe the following safety precautions when using this appliance:
• Failure or negligence in observing these safety precautions could cause fire, electric shock or personal injury.
• Make certain that the power source conforms to the electrical requirements of the fan. (220-240V ~50-60Hz)
• Do not put the fan under the power socket when using the fan.
• To reduce the risk of electric shock, this plug is intended to fit in the correct outlet.
• This appliance is intended for household indoor use only.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be under supervision to ensure they do not play with or climb on this appliance.
• Do not pinch, bend, or twist the power cord excessively, otherwise, the core conductors may be exposed or broken. If the supply cord is damaged, it must be replaced by the Shun Hing Electric Service Centre Limited in order to avoid the hazard. Do not pull the cord when removing the power plug. It may cause power cord damage, electric leakage, and other hazards.
• Locate the power cord so the appliance or other objects are not resting on it. Do not cover the power cord with carpeting, clothes or other similar objects. Arrange a power cord away from room traffic so that it will not be tripped over.
• Wipe off dust on the plug periodically and make sure the plug is fully inserted in the socket, otherwise, these may lead to the risk of electric leakage.
• Never touch the fan with wet hands to avoid electric shock.
• Do not block or tamper with the appliance in any manner while it is in operation. Do not insert fingers or allow other objects to enter any ventilation or exhaust opening as it may cause an electric shock, short circuit, fire or damage to the appliance.
• Please do not put the air intake and outlet of the fan close to the wall or curtain, otherwise, the airflow will be blocked and affect the fan performance.
• Always place this appliance on a stable, flat, level surface when operating, to avoid the chance of the appliance overturning.
• Do not use the fan under the following situation: Near gaseous fuel cooker/ Place full of inflammable gas/ Place expose to rain or water pour/ Near insecticide/ Oil corrosive solvent/ High temperature/ High humidity/ Near chemistry, oil, dust area
• Do not cover the fan in order to avoid overheating.
• If the supply cord is damaged or there is a product malfunction, please contact Shun Hing
• Electric Service Centre Ltd. for check and repair to avoid a hazard. Do not arbitrarily disassemble or replace the parts. Disassembly or modification without permission will affect the safety of the product.
• This appliance cannot contact with water. It may cause fire and electric shock.
• Please do not put any objects on the fan body.
• Avoid any shocks, frictions or concussions to the fan.
• Do not use the fan in the sunshine.
• Please do not pour water into the machine or hang wet clothes over the machine so as to avoid current leakage and electric shock; Please do not put flammable materials and wet clothes covered on the air outlet so as to avoid the risk of fire or electric shock.
• Please do not spray solvent or flammable liquid to the fan as it may cause damage to the fan.
• Please shut down the machine before the user leave the machine so as to avoid accidents.
• Avoid continuous exposure of direct wind from the fan especially to the elderly, infants, and patients.
• The power must be cut off and unplugged before cleaning or maintenance. Ensure that the fan is switched off from the supply main before removing the guard/ cover.
• Please clean the machine by using a damp cloth or a damp cloth with some mild detergent, do not use corrosive detergent or solvent and similar cleaning products, and do not pour water into the machine.
• If it occurs problems of abnormal sound or uneven wind speed after use for some time, perhaps there is too much dust in the air intake grid and making the airflow blocked, the fan could get right by cleaning the fan with a plastic brush.
• Cut off the power if the unit is not used for a long period of time. Pull out the plug, pack the fan well to protect it away from dust, and keep it in a dry, well-ventilated, and clean place.

Product Description

Parts Name

Control and Display Panel

Remote Control

Cleaning and Maintenance

Always unplug the unit before moving or servicing. Unplug the unit and wait until the fan stop running before cleaning.

Additional Advice

• Clean the fan every month.
• Do not immerse the power cord, plug the whole unit into water or rinse under the tap.
• Do not use gasoline, benzene, thinner, poisonous, or corrosive detergent to clean the unit to avoid damage of the appliance.
• Please use a tubular cleaner, dust remover, or vacuum cleaner to remove dust from the rear cover.
• Use a damp cloth to gently clean the outer surface of the fan.
• After cleaning, the product must be completely dry before connecting to the power supply.
• If the fan will not be used for a long time, store it in the cool, dry, and safety place. During storage, never wrap the power cord tightly around the appliance or put any pressure to the power cord so as to avoid power cord damage.

Disassembly of the blades & front guard

1. Use a screwdriver to loosen and then take out a screw on the right side of the back guard.
2. Hold the rear guard and turn the front guard anti-clockwise to the left and remove it.
3. Hold the blade and rotate the knob clockwise direction.
4. You can clean the inside after removing the blade and front guard.

The front guard (inner lids of aroma box must be removed) and blade can be cleaned. Please be sure to store in a dry environment after cleaning.

Installation Instruction

Assembly of base, middle tube and unit top

• The middle tube can be removed or installed, and the height can be adjusted freely.

Installed middle tube

When the product height needs to be increased.

1. Put the base on a stable position.
2. Insert the middle tube into the base.
3. Insert the unit top into the middle tube.
   • In steps 0:, (1) (2) (3) , please be aware of the mounting direction of the middle tube and unit top.
   • Press the lock button to remove the unit’s top and middle tubes.

Removed middle tube

When the product height needs to be decreased

1. Put the base on a stable position
2. Insert the unit top into the base

• Please be ware of the mounting direction of the base and unit top.
• Please store the middle tube properly when it is not in use
• Press the lock button to remove the unit top and middle tube.

How To Use

Preparadon before use

Installation of Battery

1. Pull out the battery case from the main body of the remote control and pull out the battery holder from the gap. a>
2. Insert into the coin lithium battery; keep the positive pole upwards (CR2032).
3. After inserting the battery, slide the battery box, then insert and fix the battery box.

Function

Place the fan on a stable flat surface. Insert the plug into a 220V- 240V-50-60Hz electrical power supply outlet Press the buttons on the control panel or the remote control to select functions.

Additional Function

1. Indicator Light Dimming Function: After 60 seconds no operation change on the control panel or remote control, all indicator lights dim automatically. Press any button on the control panel or remote control again, and deactivate the indicator light dimming setting, the indicator lights will light up and flash with normal brightness.
2. Auto Power Off Function: After 12 hours of continuous operation without pressing any button on the control panel or remote control, the fan will turn off automatically.

Precaution

• The machine has a memory function in an uninterruptible power-on state. Without power off, when you tum on the unit again, it will operate at the last setting before tum off.
• It is forbidden to manually adjust the fan head direction, otherwise, the automatic head swing of the product may not move smoothly or may be damaged.

Specification

• Model: RLF-9KITD
• Colour: White
• Rated Voltage: 220-240V ~50-60 Hz
• Rated Power: 25W
• Product Dimension (W x D x H): 300 X 300 X 600 / 900 mm
• Net Weight: 4.7kg

Special Avowal

1. The information above has been checked. Our company reserves the hermeneutic power to any printing errors or misunderstandings on the content.
2. If there are technical improvements on the appliance, the operation manual will be updated without any prior notice. The product appearance and color are subject to the actual appliance.
3. A thee-copy of the user manual can be sent by e-mail on request, please call Shun Hing Electric Works & Engineering Co. Ltd. hotline at 2861 2767.

After Sales Services

For any defect, in the judgment of the technician from Shun Hing Electric Service Centre Limited, caused under normal use, we are responsible for repairing or replacing parts of the said electrical appliance free of charge within one year guarantee period commencing from the date of purchase. Any defective part which has been replaced shall become our property. Guarantee service does not cover the repair or replacement of accessories, external cables or cabinets, etc. Additional charges shall be levied if services are required. Please present the official invoice and the guarantee certificate with the sales point’s chop or the redemption center’s chop for free maintenance. For inquiries, please call Shun Hing Electric Service Centre Limited hotline at 2406 5666. Free guarantee service will not be provided to the fan if: 1) it has been explicitly or implicitly modified, tampered with, altered or repaired in any way by persons other than technicians of the Company. Or 2) it has been damaged through misuse, negligence, liquid ingress or corrosion, power interruption, natural calamities or accident or external factors. Or 3) it is not a fixed installation on land. Or 4) the normal operation of the fan is affected by improper installation. Or 5) the domestic model of the fan is used for industrial or commercial purposes. Or 6) the change of location or ownership of the fan and not inform Shun Hing Electric Service Centre Limited.

SHUN HING ELECTRIC WORKS & ENGINEERING CO., LTD

• OFFICE: 9/F, PENINSULA CENTRE, 67 MODY ROAD, TSIM SHA TSUI EAST, KOWLOON, HONG KONG
• Tel: (852) 2861 2767
• Website: www.rasonic.com.

Maintenance and Repair Service

• OFFICE: 11/F SHUN HING CENTRE, 2 SHING YIU STREET, KWAI CHUNG, N.T., HONG KONG
• Tel: (852) 2406 5666
• Website: www.shesc.com.
• Consumable/ Accessories Sales Hotline
• Tel: (852) 2406 5666

Customer Service Centres

• 1/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T
• Tel: (852) 2406 5439
• Fax: (852) 2408 1389
• Avenida de Venceslau de Morais, No. 193~199, 5 andar-1, Edf. Industrial Nam Leng, Macau
• Tel: (853) 2836 2928
• Fax: (853) 2833 6405
• For the latest information on customer service centers, please visit www.shesc.com or call us at our hotline.

Disassembly of the blades & front guard

1. Use a screwdriver to loosen and then take out a screw on the right side of the back guard.
2. Hold the ring guard and turn the front guard anti-clockwise to the left and remove it.
3. Hold the blade and rotate the knob clockwise direction.
4. You can clean the inside after removing the fan blade and front guard. The front guard (inner lids of aroma box must be removed), fan blade and back cover can be cleaned. Please be sure to store in a dry environment after cleaning.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>