Baseus PPCXZ10 10000mAh Bracket Wireless Fast Charge Power Bank User Manual

Baseus PPCXZ10 10000mAh Bracket Wireless Fast Charge Power Bank

Product Parameter

• Brand: Baseus
• Name： Bracket Wireless Fast Charge Power Bank 10000mAh
• Model No： PPCXZ10
• Battery: Polymer Lithium battery
• Material： ABS+PC
• Capacity :10000mAh / 3.85V / 38.5Wh
• Rated Capacity:5800mAh （ 5V3A）
• Energy conversion rate：≥75%
• Type-C input:5V/3A;9V/2A;
• Type-C output:5V3A;9V２.22A;12V1.5A;
• Wireless Charging Output：5W/7.5W/10W/15W
• Total output：5V3A
• Product size: 117.369.720.3mm
• Product weight: About 220g FCC ID：2A482-PPCXZ1002

Packing list

1. Power Bank *1
2. User Manual * 1
3. Warranty card *1
4. Charging Cable *1

Product wireframe

Baseus Design, Made in China

Product description

This product is a portable power bank that can provide wired or wireless charging for mobile phones, tablets, and other digital products. The product has the characteristics of two in one of wired charging and wireless charging, mobile phone bracket, Power digital display, 20W PD fast charging, 15W wireless fast charging, etc. Product built-in overcharge, over-discharge, temperature protection and other safety protection circuit.

Use environment

Use ambient temperature: non-tropical area below 0℃ to 35 ℃

Icon Description

The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.  It should be clearly communicated to the user, that the phone may only be charged while it is laying on the table. Other use cases, such as charging it while wearing it on the body/hold on hand, are not allowed.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Operation description

The power button operation instructions

For viewing electric quantity:

Press the button once to initiate the power output function, when you can view the remaining electric level of the power bank. After lit for 30sec, the LED indicator will extinguish automatically.

Operation for discharging by cable:

Connect the USB charging cable to the corresponding output port of the power supply, and the power supply will automatically turn on the output. Due to compatibility problems, some smartphones need to press the key to turn on the power output function, which is a normal phenomenon and need not be ignored. Press the key once to supply power to the external equipment. Press the key once to output power for about 30 seconds. If there is no external load in 30 seconds, the power output will be automatically turned off.

Operation for discharging by wireless:

When the power indicator lights up for about 30 seconds, the mobile phone will be charged for wireless charging within 30 seconds. If the mobile phone is placed in the wireless charging area of the power supply, the mobile phone can be charged for wireless charging. If there is no wireless charging access within 30 seconds after one key, the product will automatically turn off the wireless charging function.

Wireless charging tips

The wireless charging mobile phone should be placed in the wireless charging area of the product (the transmitting area of the wireless charging coil is illustrated in the figure) for wireless charging. The wireless charging distance is within 8 mm. If the distance exceeds 8 mm, the wireless charging can not be carried out. Please adjust the wireless charging distance within the wireless charging range.

Safety warning instructions Tips

Please read all instructions and warnings before using this product. Improper use will damage the product or personal safety.

• The charging contact surface on the back of the mobile phone should not be covered with metal materials, such as iron sheet, ring, metal protective case, etc.
• When the mobile phone is charging, if intermittent charging or serious heating is found, it may be that the receiving coil of the mobile phone is not completely aligned with the wireless charging coil, or there is metal foreign matter in the protective sleeve of the mobile phone. Please try to cool the mobile phone, remove the protective sleeve, and then align it in the correct position.
• Please do not disassemble the machine by yourself. Improper use or improper placement of the product by the user may reduce the service life or damage the product. Therefore, the responsibility does not belong to the warranty responsibility or the manufacturer’s responsibility. Please understand.
• Power bank has conversion efficiency, so the battery capacity of mobile power is not equal to the rechargeable capacity.
• Please charge your power regularly (at least every 5 months is recommended) to maintain its long service life.
• Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.

Statement on Toxic and Hazardous Substances in Electronic Information

Products

This form is compiled in accordance with SJ/T 11364.
O： It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
The product complies with EU ROHS 2.0 directive (2011 / 65 / EU)

Implementation criteria

GB/T 35590-2017

Contact information

Brand： Baseus
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline: 4000-712-711 www.baseus.com

References

• Baseus Official | Simple for More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>