SEALIGHT SL9CIL19200 Underglow Ambient LED Strip User Manual

June 5, 2024
SEALIGHT

SEALIGHT SL9CIL19200 Underglow Ambient LED Strip

PRODUCT DESCRIPTION

Thank you very much for purchasing SEALIGHT. This is an RBG Underglow ambient LED strip. With the APP that comes with the product, users are able to get colors they want.

RESTRICTIONS AND GUIDELINES

  1. Do not install the Underglow ambient LED strip near water or in a corrosive location.

  2. Do not twist or trample the strip during installation.
    Restrictions And Guidelines

  3. Bind the LED strip securely to prevent them from being trapped in the crankshaft or tires.
    Restrictions And Guidelines

BEFORE INSTALLATION

  1. LED strip *4
  2. Remote control *1
  3. Screw kit *16
  4. Manual *1
  5. Cable tie *16

DOWNLOAD APP

Download and install the App from App store (for i0S) or Google Play (for Android).
Tip: The App is compatible with the following phone systems: i0S 9.0 and above, Android 5.0 and above.

CONNECT WITH THE APP

  1. Turn on the Bluetooth on your phone and make sure the LED strip is powered on.
  2. Turn on the App and tap the “+” icon.
  3. Select the device from the device list.

STEPS

  1. Before installation, power on the LED strip and try to adjust the light using the App.
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps

  2. Clean the surface where the LED strip is to be installed and wait until it is dry. Remove the red protective film and paste it on the clean, dry surface.
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps

  3. Secure the LED strip with the matching parts.
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps

  4. Bind the lights securely to prevent them from being trapped in the crankshaft or tires.
    5.1 Bind the lights securely to prevent them from being trapped in the crankshaft or tires
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps
    5.2 Connect the LED Strip to the box and turn on it.
    SEALIGHT SL9CIL19200 Underglow Ambient LED Strip Steps

CONTROLLED VIA THE REMOTE CONTROL

Buttons

| Functions
---|---
| Shut down, restore factory setting

RANDOM

| Random switch

SOLID

| Keep iton

SPEED+ /SPEED

| Switching speed

BRIGHT +/BRIGHT

| Brightness increase and decrease

COLOR+/COLOR-

| Switch color

MODE+/MODE-

| Switch light mode

FAQS

The light is not on: Check whether the light is properly wired and the interface is tightly inserted.

Bluetooth connection fails:

  1. Make sure your Bluetooth is turned on;
  2. Incompatibility. In this case please replace your mobile Phone or update your mobile Phone system;
  3. Keep the LED strip within 2 m to your Phone;
  4. If the problems persist, contact our after-sales services.

PRODUCT SPECIFICATIONS

Power supply mode

|

Car battery

---|---

Voltage

| 12-18V
Waterproof rating|

IP67

Control mode

| APP + remote controller (RF)
Operating temperature|

-40∼85°C

FCC STATEMENT BT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

CUSTOMER SERVICE

Phone Number: 1(805)538-4353
Office Hours: Mon-Fri 9 am -5pm(PST)
E-Mail:support@sealight-led.com
Website:https://sealight-led.com/
MADE IN CHINA

Documents / Resources

| SEALIGHT SL9CIL19200 Underglow Ambient LED Strip [pdf] User Manual
SL9CIL19200, 2A4IR-SL9CIL19200, 2A4IRSL9CIL19200, Underglow Ambient LED Strip, SL9CIL19200 Underglow Ambient LED Strip
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals