SRGS PTY LTD 10 BAR LED Lighting Kit Owner’s Manual

10 BAR LED Lighting Kit
Owner’s Manual

10 BAR LED Lighting Kit

WARRANTY
Our product is guaranteed to be free from quality and manufacturing defects for a period of 12 months.
If your product becomes defective during this period, SRGS PTY LTD will offer you either a replacement, credit or refund where a product is faulty; wrongly described; different from the sample shown to you or do not do what they are supposed to do.
This warranty will not cover substantially modified product; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not
amount to a major failure. To claim the warranty, take the product to the front Service Desk of your nearest store of
purchase. You will need to show receipt or other proof of purchase. Additional information may be required to process your claim. Should you not be able to provide proof of purchase with a receipt or bank statement, identification showing name, address and signature may be required to process your claim.
Any expenses relating to the return of your product to the store will normally have to be paid by you. For online store purchases, SRGS PTY LTD will pay for the return freight for any product assessed as having a major failure.
The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.
This warranty is provided by SRGS PTY LTD, 6 Courtyards Avenue, Strathpine QLD 4500, Australia. Phone: 1300 175 010.

GENERAL INFORMATION AND SAFETY INSTRUCTIONS

• Before first using of your 10 LED Bar Lighting Kit, it is most important that you read and follow these instructions. Keep this owners manual in a safe place for future reference.
•  This is an OUTDOOR DOMESTIC PRODUCT and should NOT be used for commercial, trade or industrial purposes.
• 240V AC Adaptor is for INDOOR USE only.
• This appliance is NOT intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of expensive and knowledge, unless they have been given
• supervision or instruction concerning use of the appliance by a person responsible for their safety.
• This 12V DC / 240V AC 10 LED Bar Lighting Kit must be used only for the prescribed purpose.
• Any uses other than those mentioned in this owners manual will be considered a case of misuse.
• The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.
• To use the 10 LED Bar Lighting Kit properly you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this owners manual.
• Never allow children to play with electrical equipment. Children should be supervised at all times whilst operating the 10 LED Bar Lighting Kit.

WARNINGS

• DO NOT connect to any power source other than 12 volts power output (excluding the use of the 240V AC adaptor provided in this 10 LED Bar Lighting Kit).
•  DO NOT abuse cables. NEVER pull on cables to disconnect the lights, this may result in the cables being severed from the light fitting. The manufacturer will consider this misuse of product. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.
•  DO NOT look directly into the LED lights.
• When attaching the battery terminal clamps, pay attention to ensure that no short circuit occurs.
• CAUTION: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.
• The remote control supplied with this product contains a button cell battery. If the button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• ALWAYS keep new and used button cell batteries away from children.
•  If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think the button cell batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

PARTS LIST

A. 10 x 25cm Full Colour LED Light Strips with Quality Double Sided Tape
B. 2 x 3m Extension Cables
C. 1 x 2 Way Splitter Cable
D. 1 x 3m Cable with 12V DC 2-in-1 Plug
D. E. 1 x 240V AC Adaptor (FOR INDOOR USE ONLY)
F. 1 x Wireless RF Controller with Remote Control
F. G. 1 x Battery Terminal Clamps to 12V DC Socket
H. 4 x End Caps
I. 1 x Carry Storage Bag

SPECIFICATIONS

IP68 – Extension Cables, 2 Way Splitter cable, LED Light Strips
NON-WATERPROOF| 3m Cable with 12V DC 2-IN-1 Plug, 240V AC Adaptor, Remote Control, Battery Terminal Clamps to 12V DC Socket

SETTING UP YOUR 10 LED BAR LIGHTING KIT

Please read all instruction steps carefully before attempting to assemble you 10 LED Bar Lighting Kit. Please note the below steps are only a guide, this kit is able to be arranged in multiple different setups to suit yours needs. Please refer to “Parts List” section to identify parts letters. Please test and make sure all parts are working correctly before installing your 10 LED Bar
Lighting Kit.

1. Remove all parts from the box and lay out on a flat surface for easy and quick accessibility.
2. Connect the DC jack of the 3m Cable with 12V DC 2-in-1 Plug (D) to the Wireless RF Controller (F).
3. Attach the 2 Way Splitter Cable (C) to the DC output end of the Wireless RF Controller (F).
4. Attach the 3m Extension Cables (B) to the end plugs of the 2 Way Splitter Cable (C). One or both cables may also be attached before the 2 Way Splitter Cable (C).
5.  Connect those Full Colour LED Light Strips (A) to the end plugs of the 2 Way Splitter Cable (C) or the 3m Extension Cables (B).
6.  Attach the End Caps (H) to the end plugs of those Full Colour LED Light Strips (A) that are unconnected to prevent water ingress.
7.  If you are connecting to a power source that has an existing 12V DC socket (either accessory or cigarette lighter socket), connect the 3m Cable with 12V DC 2-in-1 Plug (D). Remove the adaptor from the 3m Cable with 12V DC 2-in-1 Plug (D) first before connecting to accessory socket.
8.  If you are connecting directly to a 12V battery, attach the battery clamps of the Battery Terminal Clamps to 12V DC Socket (G) to the terminal on battery (red clamp to positive post and black clamp to negative post). Connect the 3m Cable with 12V DC 2-in-1 Plug (D) to the circular socket of the Battery Terminal Clamps to 12V DC Socket (G).
9. The Battery Terminal Clamps to 12V DC Socket (G) and the 3m Cable with 12V DC 2-in-1 Plug (D) can be substituted with the 240V AC Adaptor (E) if you are connecting to a 240V AC power source.

NOTE
Align key lock ends using the arrows marked (as shown in Figure 1) when joining the quick connectors to each other.
This kit can connect in 1 lineal length of 10 Full Colour LED Light Strips (A) or be split via the included 2 Way Splitter Cable (C) allowing 2 x 5 lengths. WIRELESS REMOTE CONTROL
Remove the plastic insulated tab from battery compartment prior to use.
The Wireless Remote Control (F) can be used to power ON and OFF the Lighting Kit.  It also allows selection of colour, brightness of static colours and desired pattern. This Wireless Remote Control (H) is NOT waterproof and MUST be kept dry all the time.

TO REPLACE THE BATTERY

1. Unscrew the security screw.
2. Push and hold down the release tab on the left side of the battery holder and pull the battery holder completely out of the remote control.
3. Remove the old battery from the battery holder and replace it with a CR2025 or CR2032 button cell battery according to the correct polarity.
4. Ensure to reinstall the security screw properly.
5. Insert the battery holder back into the remote control.

WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious or fatal injury in as little as 2 hours, due to chemical burns and potential perforation of the esophagus.
• Never allow children to replace button batteries of any device.
• If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (AU) or 0800 764 766 (NZ) for fast, expert advice.
• Regularly examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
• Dispose of used button batteries immediately and safely out of the reach of children. A battery can still be dangerous even when it can no longer operate the device.
• Tell others about the risk associated with button batteries and how to keep their children safe.

TROUBLESHOOTING

2.240V AC Adaptor is not plugged in.
3.240V AC Adaptor is not working.
4.12V clamps are not attached to battery.| 1.Make sure all connections have the arrow facing each other.
2.Make sure you have power running to 240V AC Adaptor.
3.If still not working, connect to 12V DC power source (battery).
4.Make sure the 12V clamps are connected to the battery firmly.
Some of the Light Strips are not working.| 1. Plugs are not connected correctly.| 1. Make sure all connections have the arrow facing each other.
The LED Lights will not dim.| 1. Only the static colours will
dim.| 1. Change pattern mode to static colour and dim.
The Wireless Remote Control does not work.| 1. The button cell battery may be flat.| 1. Remove the old button cell battery and replace a new one.

CLEANING AND MAINTENANCE

• Occasionally wipe this Lighting Kit down with a soft damp cloth only. DO NOT use detergents.
• Always disconnect the Lighting Kit from power supply when not in use.
•  Ensure all components are dry when packing away after use.

DISPOSAL

Please dispose of this product thoughtfully once it is passed its useful life. When your Lighting Kit comes to the end of its life or you choose to update or upgrade it, please DO NOT dispose of it with your normal household waste. Please recycle where facilities exist. Check with your local authority for suitable options when disposing of this Lighting Kit.

PLU: 633561 CODE: LED10-WANDERER
Manufactured and packaged for
SRGS PTY LTD ABN 23 113 230 050
6 Courtyards Avenue, Strathpine QLD 4500, Australia
MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>