Xhorse MK3 Smart Key Box Work with Smart Phone User Manual

Alarm Indicate: When the remote battery is too low, the buzzer will beep 8 times after the car is powered on to indicate that the battery is low, please replace it.

Bluetooth operation

Home page function:

1. The connection status bar at the top of the page, click [Not Connect] to jump to [Select Car] interface, turn on Bluetooth to connect and disconnect the device, and turn on the automatic connection function; When the device is connected, click SN prompts whether to disconnect the connecting device.
2. After connecting and learning success, click the function button to operate the corresponding function. For example, click the unlock button to unlock car.

Function settings

1. [Connect the car] Turn on Bluetooth to scan, connect, disconnect and turn on the automatic connection on this page.
2. [Automatically set] Turn on Bluetooth to disconnect the automatic lock, set the automatic lock/unlock, signal strength, and temporary cancellation on this page.
3. [History] View the operation record of automatic lock/unlock on this page.
4. [ Change style] Switch remotely with different number keys, and switch different skins on this page. Note: Please select the corresponding number keys of remote according to the original remote keys.
5. [Security setting] Set security verification methods with digital passwords, gesture passwords, fingerprint passwords or face recognition (different phones display different verification methods) on this page.lt need security verification when open the APP if turn on verification.
6. [Share] Authorize your friend to use the car, enter the password provided by your friend to generate an authorization code and send it to your friend, and your friend uses the authorization code to open the authorization mode on this page.

installation steps

1. Take out the original remote control, solder the cable according to the solder­ ing diagram of the original remote control, pay attention to the direction.
2. Connect the RF antenna, LF antenna (connect any two interfaces of Lfanten­ a), and the original remote control to be transferred.
3. Find the Vbat wire and ground wire from the fuse box, OBD interface, or other loca­tions
4. Find the ACC signal line (the original car radio, the line with electricity after the navigation power north instrument light on)
5. Connect the Vbat wire, ground wire and ACC wire of the power supply cable to the car
6. Setting DIP switch;
7. Bindings of remote control and mobile phone (refer to binding instruction);
8. Install complete;
9. After installed, take a key close to the car, test the automatic unlock and lock function if you stay away (test other keys in the same way)
10. Test unlock, lock, trunk, and car panic function after connecting with APP.

Maintenance

• Do not violently hit, shake or throw the host.
• Do not directly rinse the host and components with water or other liquids, and do not wipe the machine with a damp cloth.
• Do not place the host in a high temperature, high humidity, or dusty environment.
• Do not disassemble or modify the device privately, otherwise, it may cause accidents such as damage to the mainboard or fire.
• Please protect the key components to prevent sharp objects from damaging them.

Warranty and after-sale description

SMART KEY BOX has a warranty of 1 year. The warranty starts from the date on the invoice. If there is no invoice or the invoice is missing, purchase records from the factory are used as a reference.

* Within Warranty, free maintenance and repairing are not provided if the machine becomes dysfunctional due to the following reasons:

• Operation without referring to or violating the user manual
• Modifications or repairs to the machine by individuals
• Falling, knocking or wrong voltage
• Force majeure
• Use of the machine in places such as ships that are bad for the machine for a long time
• Damaged or worn-out plastic case due to frequent use

Regarding customer service and technical support, please contact distributors or Xhorse’s online customer service team by scanning the QR code on the back and downloading Xhorse’s official APP.

The picture is for reference only, the product is subject to the actual product. All the information and illustrations in this document are for guidance only. Xhorse reserves the right to alter products designs, dimensions, or info to improve the quality of the product The contents of this document are fully protected by  copyright and may not be copied or reproduced in any form (e.g.mechanical, electronic, printing or video recording), without permission from Xhorse