CERTA CT150PDTPGA Digital Tyre Pressure Gauge 150PSI User Guide
- June 5, 2024
- CERTA
Table of Contents
CERTA CT150PDTPGA Digital Tyre Pressure Gauge 150PSI
SAFETY & WARNINGS
- Read all instructions before first use. Retain this user guide for future reference.
- Do not use this product for applications outside of its intended use.
- Maintaining correct tire pressure will reduce tire wear and tear and extend their life.
- Proper tire pressure will improve fuel efficiency and will help maintain correct vehicle handling and safety.
- Use caution when working around excessive air pressure in car tyres.
- In order to get a strong seal, place the nozzle directly onto the tire valve.
- Putting the gauge on the nozzle from an angle could result in an inaccurate reading. Once the gauge is placed, firmly press the gauge straight down.
- Keep the lithium button batteries away from children
- Dispose of the lithium batteries correctly in accordance with your local authorities.
WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN
- Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical burns and potential perforation of the oesophagus.
- If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice.
- Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
- Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous .
- Tell others about the risk associated with button batteries and how to keep their children safe.
OPERATION
- Press the trigger to turn the tire pressure gauge on. The gauge will display “0.0” on the LCD Screen.
- Place the nozzle of the tire pressure gauge on the tire valve you wish to measure. Press firmly to ensure a good seal and to prevent air from escaping.
- Hold the gauge on the valve until the measurement display locks. It should only take a second if you have a good seal.
- Remove the gauge to easily read the pressure reading.
- To change units, simply press the trigger to cycle through the four available pressure units (psi, Bar, kgf, kPa).
- The tire pressure gauge will automatically turn off after use. To manually turn off the gauge, press and hold the trigger.
SPECIFICATIONS
- Range 0-150 psi/ 0-10 Bar/ 0-10 kgf /cm2 / 0-1000 kPa
- Display 21 x 10mm LCD display
- Power 3V Lithium coin cell
- Operating temperature -5-50°C / 23-122° F
- Automatic shutoff 30 or 60 seconds or press and hold the trigger for 3 seconds
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>