CERTA CTMINCRACTA Mini Cordless Air Compressor Tyre Inflator User Guide
- June 5, 2024
- CERTA
Table of Contents
CERTA CTMINCRACTA Mini Cordless Air Compressor Tyre Inflator
SAFETY & WARNINGS
Read all of the following instructions before use. Keep this user guide for future reference.
- Keep inflator away from children. Never insert the inflator into the mouth, ears, and eyes of people or animals to inflate. Do not use this as a toy.
- Keep the product away from flammable or explosive materials.
- Do not leave the inflator unattended while inflating. After 8 minutes of continuous use, the inflator must be stopped for the next 8 minutes.
- If there is abnormal noise or the temperature is too high during inflation, cease use immediately. Allow the inflator to cool down for at least 15 minutes. Be cautious when disassembling, the inflator will be hot.
- If the inflator is not used for a long time, ensure to store it in a dry and closed place.
- For long-term storage, it is recommended to charge it once every 3 months.
- Before using the inflator, check whether it has been charged. The first-time charging requires more than 4 hours for the inflator to be fully charged. After that, charge the inflator full until the charging indicator light emits green.
- This inflator is equipped with a battery that can be used for cordless inflating.
- Ensure to follow the instructions in this user guide to use the inflator and its accessories.
COMPONENTS
- Air Pump
- USB Charging Cable
- Car Charger
- Inflation Hose
- Schrader Valve Adaptor
- Narrow Inflating Adaptor
- Short Inflating Adaptor
- Ball Needle
OVERVIEW
- LED Emergency Lights
- Air Pump Body
- Decrease Pressure Button
- Settings Button
- Air Outlet
- Display
- Increase Pressure Button
- Power Button
- Emergency Light Button
- Micro USB Port
- Car Charging Port
ASSEMBLY
Connect the inflation hose to the air outlet. As per your requirement, attach one of the included adaptors to the inflation hose:
| Adaptor | Usage |
|---|---|
| Schrader valve adaptor | Suitable for mountain bikes, electric bikes, |
motorcycles, and most car tires.
Narrow inflating adaptor| Suitable for most inflatables, swimming rings, and
air mattresses.
Short inflating adaptor| Suitable for balloons.
Ball needle| Suitable for basketballs, footballs and other kinds of balls.
OPERATION
Powering on
- Press and hold the Power Button for 3 seconds to turn on the inflator.
Setting the air pressure value
- Short press the Setting Button to select an air pressure unit: psi, bar, kPa, kg/cm2.
- Short press the Increase Pressure Button to add once. Press and hold to keep increasing the air pressure.
- Short press the Decrease Pressure Button to decrease once. Press and hold to keep decreasing the air pressure.
- When adjusting the air pressure value, the lights will be flashing and stop when the air pressure value is set.
Inflation
- Connect the inflation hose to the item that will be inflated. Press and hold down the latch on the inflation hose.
- Press the Power Button to start inflating. When the inflation pressure reaches the pressure value you set, the inflator will automatically stop inflating.
- After inflating, unscrew the adaptor by rotating counter-clockwise. Use caution as the adaptor might be hot.
Note: It is normal if some air leakage occurs when unscrewing adaptors.
- When finished, unscrew the inflation hose from the inflator, pack the inflator and place it in a dry, ventilated, and safe place.
Powering off
- To turn off the air pump, press and hold the Power Button for 3 seconds.
Emergency lights
To turn on the Emergency Lights, press the Emergency Light Button:
- Press once Red light is on
- Press twice Blue light is on
- Press three times Red and Blue lights flash quickly
- Press four times Red and Blue lights flash slowly
- Press five times Both Red and Blue lights are on
- Press six times Light is turned off
SPECIFICATIONS
- Input Voltage Charger: 5V/2A
- Working Current: 1-5A
- Car Power Input: 12V 3A
- Charging Method: Micro USB
- Charging Time: About 4 hours
- Battery Capacity: 2000mAh
- Emergency Light Duration: Up to 6 hours
- Working Temperature: -20°C–~70°C
- psi: 150
- bar: 10.3
- Maximum Pressure
- kPa: 990
- kg/cm2: 10.5
- Dimensions: 170x60x45mm
- Product Weight: 590g
Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>