Hoover Breeze BR71_BR20011 Vacuum Cleaner User Manual

June 15, 2024
Hoover

Hoover Breeze BR71_BR20011 Vacuum Cleaner

Hoover -Breeze-BR71_BR20011-Vacuum-Cleaner-product.

INSTRUCTIONS FOR SAFE USE

  • This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.
  • Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task.

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

  • If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorized HOOVER service engineer must replace the power cord.
  • Keep hands, feet, loose clothing, and hair away from rotating brushes.
  • Use only attachments, consumables, or spares recommended or supplied by HOOVER.
  • Static electricity: Some carpets can cause a small build-up of static electricity. Any static discharge is not hazardous to health.
  • Do not use your appliance out of doors or on any wet surface or for wet pick up.
  • Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends, or other similar items.
  • Do not spray with or pick up flammable liquids, cleaning fluids, aerosols, or their vapors.
  • Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.
  • Do not continue to use your appliance if it appears faulty.

HOOVER service

  • To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorized HOOVER service engineer.
  • Do not stand on or wrap the cord around your arms or legs when using your appliance.
  • Do not use the appliance to clean animals or people.
  • Do not position the appliance above you when cleaning the stairs.

The Environment

  • The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead, it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
  • Disposal must be carried out according to local environmental regulations for waste disposal. For more detailed information about the treatment, recovery, and recycling of this appliance, please contact your local city office, your household and waste disposal service, or the shop where you purchased the appliance.

This appliance complies with the European Directives 2014/35/EU, 2014/30/EU, and 2011/65/EU.

CANDY HOOVER GROUP

  • S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

GETTING TO KNOW YOUR CLEANER

  • A. Suction Regulator
  • B. Hose Handle
  • C. Telescopic Tube
  • D. On/Off Pedal
  • E. Exhaust filter cover
  • F. Carpet & Floor nozzle (GP) F1. Carpet Nozzle (CA) F2. Hard Floor Nozzle (HF)**
  • G. Floor type selector pedal
  • H. Park Slot
  • I. Cord reel Pedal
  • J. Cleaner Main Body
  • K. Hose
  • L. Dust Container lid
  • M. Dust Container
  • N. Vortex Finder
  • O. Pre-motor Filter
  • P. Dust Container Release Button
  • Q. Exhaust Filter
  • R. 2 in 1 accessory
  • S. Pet Hair Remover Mini Turbo Nozzle*
  • T. Allergen Remover Mini Turbo Nozzle*
  • U. Grand Turbo nozzle*
  • V. Parquet Nozzle*

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

  1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. [1]
  2. To release: simply press the button on the hose end and pull.
  3. Connect the hose handle to the upper extension tube end [2], or accessories if required.
  4. Connect the extension tube lower end to the carpet and floor nozzle [3] or accessories if required.

USING YOUR CLEANER

  1. Extract the power cord and plug it into the power supply. Do not pull the cord beyond the red marker. [4]
  2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster up and raising or lowering the handle to the most comfortable cleaning position. [5]
  3. Carpet & Floor Nozzle**. Press the floor type selector on the nozzle [6] to select the ideal cleaning mode for the floor type.
    • Hard Floor – Brushes are lowered to protect the floor.
    • Carpet – Brushes are raised for the deepest clean.
  4. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [7]
    5. Adjust the suction regulator on the handle to the desired level.
    6. Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord reel pedal to wind the power cord back into the cleaner.

PARKING AND STORAGE SECTION

The tube and nozzle can be parked on the back of the cleaner for storage or temporary storage while in use.

ACCESSORIES

  • To obtain the best performance and efficiency it is recommended that the correct nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams by the letters GP, HF or CA.

  • A nozzle-type GP can be used to clean both carpet and hard floor.

    • A nozzle-type HF is suitable for use only on hard floors.
    • A nozzle of type CA is suitable for use only on carpet.
  • The other nozzles are accessories for specialist cleaning tasks and are recommended for occasional use only.

  • All accessories can be fitted to the hose handle or the end of the tubes.

2 in 1 Tool combines several functions into one tool:

  • Crevice Tool – For corners and hard-to-reach areas.
  • Dusting Brush – For bookshelves, frames, keyboards, and other delicate areas.
  • **Pet Hair Remover Mini Turbo Nozzle*** – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard-to-clean areas. Particularly suitable for pet hair removal.
  • **Allergen Remover Mini Turbo Nozzle*** – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard-to-clean areas. Particularly suitable for allergen removal.
  • **Parquet Nozzle*** – For parquet floors and other delicate floors.
  • IMPORTANT: Do not use the Mini Turbo Nozzles on rugs with long fringes, animal hides and carpet piles deeper than 15mm. Do not keep the nozzle stationary while the brush is rotating.

CLEANER MAINTENANCE

Emptying the Dust Container

When the dust reaches the max level indicator on the container, empty the dust container.

IMPORTANT: To maintain optimum performance, do not allow the dust to exceed the maximum level.

  1. Turn off the cleaner with the main switch and unplug the power cable.
  2. Press the bin release button and remove the bin assembly from the cleaner. [8]
  3. Hold the dust container with one hand, and remove the dust container lid by rotating anti-clockwise. [9]
  4. Remove the pre-motor filter assembly from the bin assembly. [10]
  5. Remove the Vortex Finder from the bin assembly. [11]
  6. Empty the dust from the bin. [12]
  7. Refit the vortex finder and pre-motor filter assembly to bin assembly.
  8. Refit the dust container lid to bin assembly.
  9. Close and refit to the cleaner main body.

Cleaning the Washable Filters

The cleaner is fitted with a motor filter and exhaust filter. To maintain optimum cleaning performance, regularly remove the filters and tap against the side of the bin to release dust. The filters should be washed every 5 cassette empties or when the filter has an excessive dust level.

  • IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your filters may result in air blockage, overheating, and product failure. This may invalidate your guarantee.
  • IMPORTANT: Regularly check and maintain the filters.
  • IMPORTANT: Always ensure the filter pack is fully dry before use.

To access the filter:

  1. Remove the dust container from the cleaner. [8]
  2. Hold the dust container with one hand, and remove the dust container lid by rotating anti-clockwise. [9]
  3. Remove the pre-motor filter assembly from the bin assembly. [10]
  4. Gently tap and wash the pre-motor filter. Do not use hot water or detergents. Remove excess water from the filter and leave to dry fully before re-using. [13] [17]
  5. Reassemble the pre-motor filter assembly once fully dry and refit to the cleaner.

To access the exhaust filter:

  1. Unclip the exhaust filter cover from the rear of the cleaner main body. [14]
  2. Remove the exhaust filter from the rear of the cleaner. [15]
  3. Gently tap and wash the filter using warm water. Do not use hot water or detergents. Remove excess water from the filter and leave to dry fully before re-using. [16] [17]
  4. Refit the exhaust filter to the rear of the cleaner once fully dry and refit the exhaust filter cover.

IMPORTANT: Do not use the product without the filter pack fitted.

Cleaning the dust container/separation unit

This cleaner uses a separation system unique to Hoover. If necessary the separation unit can be disassembled from the dust container and cleaned.

  1. Press the dust container release button and remove the bin assembly from the cleaner. [8]
  2. Hold the bin with one hand and with the other hand remove the dust container lid by rotating anti-clockwise. [9]
  3. Remove the dust container lid by rotating anti-clockwise. Remove the pre-motor filter from the dust container assembly. [10] Then remove the vortex finder from the dust container by pulling. [11]
  4. If necessary, use a cloth to remove excessive dust from the vortex finder surface. Reassemble the internal components in the bin.
  5. Reassemble the dust container lid to the dust container. Refit the dustbin to the cleaner.

Removing a blockage

  1. Check if the Dust Container is full. If so, refer to ‘Emptying The Dust Container’.
  2. If the Dust Container is empty, but the suction is still low:
    • Do the filters need cleaning? If so, refer to ‘Cleaning the Washable Filters’.
    • Check if there is any other blockage in the system – Use a rod or a pole to remove any blockage from the tubes or hose.
    • Check for and clear any blockage in the Nozzle
    • Check if the separation unit needs to be cleaned. Refer to ‘Cleaning the separation unit.

WARNING – If the cleaner is used for a significant period with a blockage, a thermal cut-out will switch the cleaner off to prevent overheating. If this should happen, switch the cleaner off, unplug and correct the fault. It will take about 45 minutes for the cut out to automatically reset.

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service.

  • Is there a working electricity supply to the cleaner? Please check with another electrical appliance.
  • Is the dust container over-filled? Please refer to ‘Cleaner Maintenance’.
  • Is the filter blocked? Please refer to ‘Cleaner Maintenance’.
  • Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.
  • Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.

IMPORTANT INFORMATION

Hoover Spares and Consumables

  • Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or directly from Hoover. When ordering parts always quote your model number.

Quality

  • Hoover’s factories have been independently assessed for quality. Our products are made using a quality system that meets the requirements of ISO 9001.

Your Guarantee

  • The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
  • Subject to change without notice.

Frequently Asked Questions

Is Hoover Breeze BR71_BR20011 vacuum cleaner suitable for use by children or people with reduced physical capabilities?

Yes, this vacuum cleaner can be used by children aged 8 years and above and by individuals with reduced physical, sensory, or mental capabilities, provided they are given supervision or instruction on safe use and understand the hazards involved. However, children should not play with the appliance, and cleaning or maintenance tasks should not be carried out by children without supervision.

What should I do if the power cord of Hoover Breeze BR71_BR20011 is damaged?

If the power cord is damaged, stop using the appliance immediately to avoid safety hazards. Contact an authorized Hoover service engineer to replace the power cord.

Can I use Hoover Breeze BR71_BR20011 vacuum cleaner outdoors or on wet surfaces?

No, you should not use this appliance outdoors or on wet surfaces, and it should not be used for wet pickup.

Can I pick up hard or sharp objects with Hoover Breeze BR71_BR20011 vacuum cleaner?

No, you should not pick up hard or sharp objects, matches, hot ashes, cigarette ends, or similar items with this vacuum cleaner.

Is it safe to use flammable liquids, cleaning fluids, aerosols, or their vapors with Hoover Breeze BR71_BR20011 appliance?

No, you should not spray with or pick up flammable liquids, cleaning fluids, aerosols, or their vapors with this vacuum cleaner.

Can I run over the power cord while using the Hoover Breeze BR71_BR20011 appliance?

No, you should not run over the power cord when using the appliance, and you should not remove the plug by pulling on the power cord.

What should I do if the Hoover Breeze BR71_BR20011 vacuum cleaner appears faulty?

If the vacuum cleaner appears faulty, you should stop using it and seek assistance from Hoover service to address the issue.

How should I dispose of Hoover Breeze BR71_BR20011 when it's no longer in use?

This appliance should not be treated as household waste. Instead, it should be handed over to the applicable collection point for recycling of electrical and electronic equipment in accordance with local environmental regulations.

What are the main components and accessories of Hoover Breeze BR71_BR20011 vacuum cleaner?

The main components include a suction regulator, hose handle, telescopic tube, on/off pedal, exhaust filter cover, carpet & floor nozzle, floor type selector pedal, park slot, cord reel pedal, cleaner main body, hose, dust container lid, dust container, vortex finder, pre-motor filter, dust container release button, exhaust filter, and various nozzle attachments for different cleaning tasks.

How should I maintain the Hoover Breeze BR71_BR20011 vacuum cleaner?

Maintenance includes emptying the dust container, cleaning washable filters, and cleaning the dust container/separation unit.

Can I use the provided nozzle with Hoover Breeze BR71_BR20011 attachments for various cleaning tasks?

Yes, there are different nozzle attachments for specialized cleaning tasks, such as crevice tool, dusting brush, pet hair remover mini turbo nozzle, allergen remover mini turbo nozzle, and parquet nozzle. These attachments can be fitted to the hose handle or the end of the tubes as needed.

Can I use the Hoover Breeze BR71_BR20011 vacuum cleaner on both hard floors and carpets?

Yes, the vacuum cleaner has a floor type selector on the nozzle that allows you to choose the ideal cleaning mode for different floor types, including hard floors and carpets.

Reference:Hoover Breeze BR71_BR20011 Vacuum Cleaner User Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals