CERTA CTAIRCCRDLA Cordless Air Compressor Tyre Inflator User Guide
- June 1, 2024
- CERTA
Table of Contents
CERTA CTAIRCCRDLA Cordless Air Compressor Tyre
SAFETY & WARNINGS
- Read all instructions carefully and retain this user guide for future reference.
- Improper use of this tyre inflator may result in product damage, excess heat, toxic fumes, fire, or explosion.
- Children must not operate the tyre inflator alone.
- Do not use the tyre inflator in sunlight, high temperature or high pressure.
- Do not put the tyre inflator in water.
- Do not exposure the tyre inflator to rain or use it in or near water.
- After 10 minutes of constant use, it is recommended to turn the tyre inflator off and allow it to cool for 30 minutes to extend its service life. If long-time operation is unavoidable, take intermittent breaks to allow the tyre inflator cool down.
- Turn the power switch off after use.
- Store the tyre inflator indoors and away from fire.
- During operation, the tyre inflator will get warm. This is normal.
COMPONENTS
-
USB-C Charging Cable
-
Multifunctional Nozzles
OVERVIEW
OPERATION
Charging
- Plug the USB-C end of the provided charging cable into the USB-C charging port on the tyre inflator. Plug the USB end of the provided charging cable into a power adapter.
- The USB-A port can be used to charge devices.
Using the Tyre Inflator
-
Connect the air hose to the inflator
-
Screw the air hose to the tire valve.
-
Press the hold for 3 seconds to power on the inflator.
-
Press to wake up the screen or start inflating.
-
Press to switch between 4 different modes .
-
Press and hold for 3 seconds to adjust the target pressure.
-
Press + or – to increase or decrease the target pressure.
-
Press to start inflating.
-
When the real pressure reaches to the target pressure, inflation will stop automatically. Stop inflating any time by pressing . Turn off the power switch after use.
Inflation Mode
-
Sedan Car Tire
-
Bicycle
-
Motorcycle
-
Ball
Pre-set Pressure
- Press and hold ‘ ‘ to change the pressure unit.
- Press: + or – to increase or decrease the target pressure.
- When the pressure display stops flashing, press to start inflating.
- When the desired pressure is reached, it will stop automatically
Battery Display
| Battery Mark | Description | Battery Percentage |
|---|---|---|
| First | Solid. | 100-70% |
| Second | Solid. | 70-40%. |
| Third | Solid. | 40-10%. |
| Fourth | Flashing. | <10% |
SPECIFICATIONS
| Model Material | ABS |
|---|---|
| Dimension | 89 x 47.5 x 137mm |
| Power | 50W |
| Voltage | 7.4V |
| Battery Capacity | 2000mAh x2 |
| USB-A Output | 5V/1A |
CUSTOMER SUPPORT
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
