OUKITEL WP5PRO Smartphone User Manual

OUKITEL WP5PRO Smartphone

Overview

Accessories

Battery

WPS Pro has included an internal battery. You can track your battery status with the icon shown on the top right of the screen. As microwave ovens, stoves, or radiators, batteries may explode when overheated.

Warning

• Use only OUKITEL-approved batteries specifically designed for your phone. Incompatible batteries can cause serious injuries or damage to your phone.
• Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated

Basic parameters

• Display: 5.5 HDIPS Touch screen
• Operating system: Android 10
• Processor: Cortex-A53 up to 1.8 GHz “4/1.5GHz “4
• GPU: IMG GEB320 650Mz
• RAM: 2/3/4GB
• ROM: 16/32/64GB
• Battery: 8000mAh, Quick Charge

Camera

• Rear Camera: 13.OMP main camera Led Flash
• Front Camera: 5. OMP

Connection (1/O)

• Europe Band
  • GSM: 2/3/5/8
  • WCDMA: 1/8
  • FDD: 1/3/7/a/19/20
• American Band
  • GSM: 850/1900
  • WCDMA: Band 2/5
  • FDD: Band 214/5/7/12/1
  • FM: 87.5 MHz-108 MHz
  • SIM Card Slot: Dual SIM, Nano+Nano /Nano TF Card

Note: Based On Local Frequency Band

Other Features

• Video: AV1, MP4, WMV, MKV, MOV, ASF, FLV
• Audio: FLAC, APE, AAC, MKA, MP3, M4A, AMR, ALAC, WAV
• Image: JPEG, BMP, GIF, PNG

Dimension & Package Contents

Address
Comes with the Google’M app and Google Chrometh Android is a trademark of Google LLC MANUFACTURER NAME: SHENZHEN YUNJI INTELLIGENT TECHNOL0GY CO.,LTD MANUFACTURER ADDRESS: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUAN LAN, LONGHUA NEW DISTRICT, SHENZHEN CHINA

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference

1. This device may not cause harmful interference and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. FCC ID: 2ANMU-WP5PRO

Documents / Resources

| OUKITEL WP5PRO Smartphone [pdf] User Manual
WP5PRO, 2ANMU-WP5PRO, 2ANMUWP5PRO, WP5PRO Smartphone, Smartphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>