teesa TSA4008 Automatic coffee machine with grinder Owner’s Manual

teesa TSA4008 Automatic coffee machine with grinder

product overview

Thank you for purchasing TEESA appliance. Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

SAFETY INSTRUCTIONS

In order to reduce the risk of injuries or damages, follow basic safety precautions applied when usingany electrical device, including the following:

1. Read the entire instruction manual before you start installation and assembly and keep it for future reference. Keep the manual for future reference.

2.  Before connecting the device to power supply socket, make sure the voltage indicated on the device corresponds to the voltage in the power supply socket.

3. Appliance for household use only.

4. Clean and store this appliance in accordance to instructions listed in “Cleaning” section.

5. ALWAYS turn off the device and disconnect it from the mains supply:
   • if it’s not operating correctly
   • if there’s an uncommon voice when using
   • before disassembling the device
   • before cleaning
   • when not in use

6.  When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.

7.  Do not turn on the device if the water tank is empty.

8. Danger of scalding! Never direct the jet of hot steam or water towards yourself or other people!

9. To operate the coffee machine always use handles or knobs.

10. Do not touch the coffee machine when it is working as this brings the risk of burning

11.  When hot water is being generated from the nozzles keep your body at the distance from the coffee machine to prevent scorch.

12.  Keep the device out of the reach of children.

13.  This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.

14. Fixed power cable may only be replaced in an authorized service point.

15. Keep the device and its cord/cable away from heat, water, moisture, sharp edges and any other factor which may damage the appliance or its cord.

16. Make sure the power cord does not touch any hot or sharp elements.

17.  Do not use the product for purposes different from displayed in this operating manual.

18. Do not place the appliance in water or any liquid; nor handle/use it with wet or moist hands.

19.  Do not leave the appliance unattended when it’s working.

20.  Producer of this product is not responsible for damages caused by inappropriate handling and using of the device.

21. ALWAYS disconnect the product form the power mains when it is not in use.

22. DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.

23. Do not attempt to repair this device yourself. Only authorized and qualified personnel may repair this device. Never disassemble this device.

24. Use only authorized accessories.

PREPARATION FOR USE

1. Locate the coffee machine:
   • out of the reach of children,
   • away from water and heat sources
   • on a stable and flat surface,
   • in a properly ventilated place,
   • near the power mains socket.

2. Connect the power cord to the power supply socket.

3.  The display will turn on and stay in standby mode (Pic. 1).

4.  Touch anywhere on the display to wake up the screen.

5.  The self-test, warm-up, and self-cleaning processes begin. This process should not be interrupted (Pics 2 and 3).

Descaling process is strictly connected with the water hardness. The harder the water, the more often descaling process should be performed. Therefore it is important to set the water hardness before first use. To do this proceed as follows:

1.  Take the water hardness test strip (not included)
2. Dip the strip completely into a glass of tap water for a second.
3.  Then remove the strip from the water and shake it gently. After about one minute 1, 2, 3 or 4 red squares appear depending on the hardness of the water.

Filling the water tank

1.  Open the water container cover.
2. Grab the handle of the water tank and pull it out.
3. Rinse it under running water.
4. Fill the water tank with fresh water. Do not exceed the MAX level.
5. Correctly reassemble the water tank back into place.
6. Close the water tank cover.

Note:

•  Never fill in other liquid.
• Do not use warm or hot water as this may damage the device.
•  Do not turn on the device if the water tank is empty.
•  When FILL WATER appears on the display, brewing coffee is no longer possible. You must refill the water tank first.

Filling the coffee beans container

1. Pour at least 30 g of beans into the coffee bean container.
2. If the container is empty, an appropriate message will appear on the display.

SETTINGS

To enter the settings menu, select “Settings”

Water hardness

1. Select “Water hardness” in the settings menu
2.  Choose from four levels of water hardness depending on the result of the tap water hardness test.
3.  Press “OK” button to confirm.
4. The device will automatically remind you to carry out the descaling process:
   • Level 1 – after using 150 l of water
   • Level 2 – after using 120 l of water
   • Level 3 – after using 90 l of water
   • Level 4 – after using 60 l of water

Coffee temperature

1. Select “Coffee temperature” in the settings menu
2. Select one of the temperature settings: “Low”, “Medium” or “High”.
3. Press “OK” button to confirm.

Preference

1. Select “Preference” in the settings menu
2. To change the saved preferences of the coffeemade, select the icon of the required coffee and use the “+” and “-” buttons to set the volume of brewed coffee, its strength and the    time of frothing the milk.
3.  In the “Water” option, the amount of water is selected in hot water mode.
4.  In the “Milk” option, the amount of milk is selected in hot milk mode.

Descale

• Add descaling agent for coffee machines to the water container according to the detergent manufacturer’s recommendations.
• If the water container is not full, refill it with water.
• Select “Descale” in the settings menu.
• The water pump will run for 30 seconds, then will pause for 3 minutes and restart the pump for 30 seconds. The device will perform 11 such cycles.
• After finishing work, pour out the contents of the water container and refill it with clean water, then press the “OK” button
• The device will clean the remaining elements and will stop working after pumping about 1 liter of water.

Clean

1. Select “Clean” in the settings menu.
2. Connect the rubber tube to the opening of the milk frother and insert the other end into a vessel with clean water.
3. Press “OK” button to start process.

Eco Time

1. Select “Eco Time” in the settings menu.
2. Select the time after which the device, which is not being used, enters the sleep state.
3. Confirm with “OK”button.

Language

1. Select “Language” in the settings menu.
2. Choose the language and confirm with “OK” button.

Factory reset

1. Select “Factory reset” in the settings menu.
2.  Confirm reset with “OK” button.

Cup counter
In the settings menu, press the button located in the lower right corner of the screen.

Fan settings

1. Select “FAN” in the settings menu.
2. Select “ON” or “OFF” option.
   Note: It is recommended that you set this feature to On. This is helpful in removing excess water vapor from the device.

Grinding level of beans

1.  To set the grinding level of beans, use the knob next to the coffee beans insertion hole.
2. If anti-clockwise adjusted, the powder size will be fine and coffee taste stronger.
3. If clockwise adjusted, the powder size will be coarse and coffee taste weak.

COFFEE PREPARATION

1.  Place a cup under the coffee outlet.
2. Connect one end of the rubber tube to the milk frother.
3. Place a container with milk next to the coffee machine and insert the other end of the rubber tube into it.
4.  On the screen, select the desired coffee, its strength, amount and time of frothing the milk.
5. Confirm with “OK” button.
6. The coffee-making process can be interrupted by touching the X button on the screen.
7. The coffee-making process can be interrupted by touching yellow coffee icon on the screen.

Coffee powder brew function

1. The device has the function of preparing pre-ground coffee.
2. To activate this mode, press the “Powder” button on the main screen.
3. Pour one spoon of ground coffee into the hole next to the coffee beans.
4.  Select desired coffee on the main screen and confirm with “OK” button.

CLEANING

•  It is recommended to rinse the water container at least once a day.
• Brewing unit should be cleaned at least once a week using dry cloth.
• The milk frother tube should be cleaned after each use.
• Dump container and drip tray should be cleaned at least one a week.
•  If the machine is not used for a long time, it is recommended to clean all elements so as to leave the machine clean.
•  Milk frother cleaning:

1. Press Part A and Part B to disassemble the milk frother system from the coffee machine.
2. Remove Part C from the milk frother.
3. Use running water to remove the remaining milk inside
4. Place Part C back into the milk frother. Remember to properly match it with the holes in the frother.

SPECIFICATION

FUNCTIONS

• Easy programming and full touch colorful visual screen Milk frother

• Removable brewing unit

• Removable water tank

• Automatic cleaning

• Automatic descaling

• Menu in 4 languages

• Coffee grinder

• Adjustable coffee temperature

• Silent work

• Adjustable coffee strength

• Possibility of using coffee beans and ground coffee Cup warmer

• Cup counter

• Adjustable coffee temperature
  TECHNICAL DATA

• Coffee volume control: 30 – 250 ml

• Coffee strength settings: 5

• Amount of ground coffee: 7 – 12 g

• Height adjustable coffee-milk spout:75 – 145 mm Pump pressure: 19 bar

• Waste coffee cake capacity: 10 cups

• Water container capacity: 2 l

• Coffee beans container capacity: 250 g

• Maximum power: 1500 W Cable lenght: 1 m

• Power supply: 220 – 240 V ~ 50 Hz
  PHYSICAL PARAMETERS

• Dimensions: 460 x 240 x 340 mm

• Weight: 10 kg

• In set: spoon for coffee powder, milk container, user’s manual

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>