teesa TSA3235 Crepe Maker Owner’s Manual
- June 1, 2024
- teesa
Table of Contents
teesa TSA3235 Crepe Maker
Product Information
Specifications
- Brand: TEESA
- Model: TSA3235
- Dimensions: 345 x 308 x 62 mm
- Plate Diameter: 30 cm
- Power: 1200 W
- Power Supply: 220 ~ 240 V; 50/60 Hz
- Weight: 1.15 kg
Product Usage Instructions
Safety Instructions
- Read the entire instruction manual before installation and keep it for future reference.
- Ensure the voltage on the device matches the power supply socket before connecting.
- Do not connect the appliance through an external switching device.
- For indoor use only on a flat and stable surface.
Operating Instructions
- Plug the power cord into the socket. The red power light will illuminate.
- Wait until the set temperature is reached and the green ready light turns on.
- Moisten the batter spreader with water to prevent sticking.
- Pour a small amount of batter onto the baking plate and spread it evenly with circular motions.
Cleaning Instructions
- Avoid using metal utensils to protect the non-stick coating.
- Clean the crepe maker only when it has cooled down completely.
- Keep the appliance out of reach of children.
FAQ
- Q: Can I use metal utensils with the crepe maker?
- A: It is not recommended to use metal utensils as they may damage the non-stick coating.
- Q: How do I know when the crepe maker is ready to use?
- A: Wait for the green ready light to indicate that the set temperature has been reached.
- Q: What should I do if the power cord is damaged?
- A: A damaged power cord should only be replaced by an authorized service provider.
PARTS
- Temperature control knob
- Power light (red)
- Ready light (green)
- Baking plate
- Batter spreader
- Spatula
Thank you for purchasing the TEESA appliance. Please read this operation instruction carefully before use, and keep it for future use. The distributor does not take responsibility for damages caused by inappropriate handling and use of the product.
SAFETY INSTRUCTIONS
To reduce injuries or damages, follow basic safety precautions applied when using any electrical device, including the following:
- Read the entire instruction manual before you start installation and assembly and keep it for future reference. Keep the manual for future reference.
- Before connecting the device to the power supply socket, make sure the voltage indicated on the device corresponds to the voltage in the power supply socket.
- This appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. The device must be connected directly to the power outlet.
- The device is for indoor use only.
- Place the device on a flat and stable surface.
- Position the device in a properly ventilated place.
- Do not place the device on fragile or soft surfaces.
- Do not move the appliance while it is operating.
- The danger of burns! During operation, the temperature of accessible surfaces can be very high. Therefore use only handles or knobs to operate the appliance.
- Clean this device by the instructions listed in the Cleaning section.
- ALWAYS turn off the device and disconnect it from the mains supply:
- if it’s not operating correctly
- if there’s an uncommon voice when using
- before disassembling the device
- before cleaning
- when not in use
- When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
- Keep the device out of the reach of children. Do not leave children unsupervised with the product.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
- Fixed power cables may only be replaced at an authorized service point.
- Keep the device and its cord/cable away from heat, water, moisture, sharp edges and any other factor that may damage the appliance or its cord.
- Do not place the appliance in water or any liquid, nor handle/use it with wet or moist hands.
- Do not use the product for purposes different from those displayed in this operating manual.
- Do not leave the appliance unattended when it’s working.
- The producer of this product is not responsible for damages caused by inappropriate handling and using of the device.
- DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.
- Do not attempt to repair this device yourself. Only authorized and qualified personnel may repair this device. The device has no user-serviceable parts inside.
- Use only authorized accessories.
- Make sure the power cord does not touch any hot or sharp elements.
- This device is suitable exclusively for food preparation. Do not place inside the device anything that is not food.
- To avoid the risk of electric shock, the device is equipped with a grounded plug. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Do not modify the plug or use any adaptors.
OPERATION
-
Place the appliance on a flat, stable and heat-resistant surface.
-
Plug the power cable to the power socket. The red power light is on.
-
Set the temperature control knob to the desired position. The green ready light is on. The appliance starts heating.
-
Wait until the ready light goes off- it means that the appliance has reached the set temperature and is now ready to be used.
Notes:- It is normal for the ready light to go on and off- the thermostat operates to maintain the temperature.
- Exercise caution since the baking plate is very hot. Do not touch the baking plate! Burning hazard!
-
Moisten the spreader with water to prevent sticking.
-
If needed, apply a thin layer of oil on the baking plate with a brush. It is not necessary though.
-
Pour a small amount of batter into the centre of the baking plate.
-
Spread it with circular movements of the spreader.
-
Wait until the surface is no longer liquid and the crepe can be moved slightly.
-
Use a provided spatula, insert it under the crepe and turn it over.
Note: Do not use any metal utensils as they can damage the non-stick coating of the baking plate. -
When the crepe is ready, take it away from the baking plate.
-
After finishing baking, unplug the appliance and let it cool down.
CLEANING AND MAINTENANCE
- Always unplug the appliance and let it cool down before cleaning.
- Do not immerse the appliance in water or put it in a dishwasher.
- Clean the appliance after every use.
- Wipe the baking plate and the housing with a clean, damp cloth.
- Hand wash the spreader and spatula under running water.
- Do not use any abrasives or chemical agents to clean this product.
- Store this appliance in a dry, cool place, out of the reach of children.
SPECIFICATION
Main features
- Temperature control
- Non-stick baking plate coating
- Power light
- Ready light
- Overheating protection
- Power cord storage
- Anti-slip feet
Technical data
- Baking plate diameter: 30 cm
- Maximum power: 1200 W
- Power supply: 220 ~ 240 V; 50/60 Hz
- In set: batter spreader, spatula
Physical parameters
- Weight: 1,15 kg
- Dimensions: 345 x 308 x 62 mm
- Cord length: 60 cm
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne. www.teesa.pl.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>