WOHOME LY138 Smart Camera Instruction Manual

WOHOME LY138 Smart Camera

PACKING LIST

1. Camera x1
2. Instruction Manual x1
3. USB cable x1 USB
4.  Iron Ball Wall Mountx1
5.  Screws x2
6. Battery x2

CAMERA STRUCTURE

1. Lens
2. Mic
3. Light sensor
4. LED
5. Motion detection sensor
6. Charge LED
7. USB interface
8. Speaker

Charge LED: Charging in Red;Full in Green.

1. Resrt button
2. Mirco-SD card
3. Power button
4. 18650 Battery
5. Flip Switch

Power button： Long press to turn on/off the camera.
Note: The camera will turn on automatically when the battery is installed.

THE CAMERA OPERATING

Inserting SD Card
Please open the camera cover,and firstly insert the Mirco-SD card. Slide the SD card cover down ,then open the cover and inset the SD card.

Loading batteries
Please install 18650 battery.
Note: Please notice the polarity of the battery.

Resetting camera

Press the Reset button long until you hear the “system reset” prompt from the camera speaker.After resetting camera, you’re ready to connect to the Tuya App.

NSTALL TUYA SMART APP

The App is available for iOS,Android. Search “tuya smart” in App store or google play store,or scan below QR Code to download and install the App.

CONNECT THE CAMERA WITH APP

Account Registration and Login
Please open Tuya App,and enter the App main interface. New users need to register by Email or Mobile number,click “Register”. Follow the steps to complete the registration of  the account,and login.

Please log in directly if you already have an account. To input your account and password ,click“Log in”.

Add Device

Pairing the camera. The camera lens is aimed at the QR code on the phone screen with a distance of 15cm. It will sound”bugu” after the camera recognize the QR code.

Please click “Hear a prompt” if you heard it ,then will start connecting. The camera added successfully ,and enter to the main interface.

FUNCTION OVERVIEW

Settings

Click to enter detailed settings of the camera. You can check  more about it in the section of Settings on page 13.
Signal
The camera may be disconnected if the signal is lower than 50%. Please move your camera to be closer to your router for better signal.
Battery capacity
Please charge the camera timely if the power is less than 2 bars.
Image quality
TAP to switch the image quality between HD and SD. SD is recommended for a smoother streaming.
Screenshot
TAP to capture the current live picture and save it to your mobile device.
Speak
HOLD  and talk to people on the camera side.
Record
TAP to start recording the current live streaming. Tap again to end and save it to the internal storage of your mobile device.
Playback
TAP  to play the videos recorded in the MicroSD card.

SETTINGS
Click enter to the Settings page. There are only a few settings to make,so the process is quick and easy. To start setting up your camera.

Device name
Allow you to set the name of the device .
Share device
Allow you to share the device with your family . Add your family’s account in App.
Note: Firstly ensure family’s account already registered in Tuya App.

Power management settings
This function is it will push a notification if the battery is low .You can set the low battery alarm threshold ( 0% to 30%). Note: Firstly please enable Tuya App notification in mobile setting .
Basic function settings
Flip screen setting. The function is to flip the screen angle. Talk mode setting .Select one-way communication or two-way talk you want.
PIR
OFF means you shut down the function. Also ,you can set the PIR sensitivity for Low,Medium,High. The camera will take pictures and videos automatically when it is triggered by the PIR sensor’s detection of activity in the area it covers. Meanwhile, it will push a notification to your phone when PIR is triggered.
IMPORTANT
Reducing the False Alarms

1. Make sure the PIR sensor of the camera is not facing bright lights(including sunshine ,bright lamps, etc), mirror, windows or glass.
2. Do not mount the camera in a place with moving vehicles or streaming people.
3. Stay away from air vents of air conditioner or heating sources like stove, lights and refrigerator, etc. To avoid wireless interference.
4. Please do not scratch or squeeze the PIR sensor to avoid lowering its detection sensitivity.
5. A mounting height of 2M is recommend to reduce false alarms caused by the movements of small animals on the ground. If it’s required, please mount the camera at a height around 1.5M.
6. When mounting the camera an appropriate angle between the PIR sensor and the monitoring area is recommended.
7. The effective distance between the PIR sensor of the camera and the moving objects id 2M to 8M.

CAMERA INSTALLATION

Please fix the iron ball bracket to the wall with screws ,and then magnetize the camera to the iron ball. It is very convenient and easy to adjust the angle.

FAQ

Q1.The camera can’t connect to Wi-Fi.
Make sure you select the right Wi-Fi network and enter the right password. Make sure your Wi-Fi is 2.4GHz. Make sure the camera and your mobile device are close to the router.
Q2. How can I reset the camera?
Please press the Reset button .There is beeping sound after a successful reset and the RED LED will flash slowly.
Q3. Why can’t I receive the push notifications of the alarms?
Make sure you have allowed Tuya App to push notifications in the settings of your mobile device.
Q4. Why there is no video recorded?
Make sure you have installed a Micro-SD card with enough capacity into the camera or you have subscribed a cloud plan.

SPECIFICATIONS

flash  distance

PIR Motion Sensor| 6 meters PIR distance
Storage| Up to 128GB Micro SD card
Connectivity| 802.11b/g/n W i-Fi@2.4G
Power consumption| Standby 200uA Working 220mA
Battery| 2×18650 batteries
U S B| D C 5 V
W i-Fi distance| 60 meters (open space without obstacle)15 meters (indoor)
Video Compression| H.264
Voice Intercom| Two-way audio with noise cancellation
Video resolution| 1920*1080@15fps
W orking Temperature| -10~ 55 ℃
Storage Temperature| -20~ 60 ℃

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Opera-tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The distance between user and products should be no less than 20cm.

If you have any questions or problems. Please contact us by email:babymonitor@whomeshop.com
We will offer prompt and authoritative reply within 24 hours, and try our best to resolve your problem ASAP.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>