WOHOME S89 28-Inch 80W Soundbar Instruction Manual

: June 5, 2024
: WOHOME

WOHOME S89 28-Inch 80W Soundbar

WOHOME-S89-28-Inch-80W-Soundbar-
PRODUCT

Important Safety Instructions

Read these Instructions.
Keep these Instructions.
Heed all Warnings.
Fo11ow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nonnallY, or has been dropped.

Special note:
When placing your unit on a lacquered or natural finish, protect your furniture with a cloth or other protective material.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 ofthe FCC Rules. Operation is subject to the following two conditions this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Tiris equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hannfu1 interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/IV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be inst.ailed and operated with minimum distance 20cm between the radiator& your body.

Additional Warnings

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. ec/aboussures et aucun ob jet ne contenant de liquide, tel Battery shall not be exposed to excessive heat such as sunshine, fire or the light.Caution marking is located at the rear or bottom of the apparatus. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

Checking the Components

WOHOME-S89-28-Inch-80W-
Sound

Product Overview

Control Panel of the Soundbar

Short Press to change the input mode, LED screen show current mode.
Power on/off button
Long press to adjust the volume, when adjusting, LED screen will showed the number Short press to prev song or next song under BT and USB mode
Pause/play under BT and USB mode; mute/unmute under the AUX, optical, coaxial.and ARC mode.
- When you plug in the power cord, the buttons will begin working in 2 to 4 seconds.
- If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in Audio Setup menu of your TV. Refer to the user manual supplied with your TV

Rear Panel of the Soundbar

USB, connect a USB device here to play music files on the USB device through the Soundbar.
Digital Audio In (optical), connect to the digital (optical) output of an external device.
Coaxial Audio In (coaxial), connect to the digital (coaxial) output of an external device.
TV ARC, Connet to the ARC output of an external device.
AUX, connect to the Analog output of an external device.
DC IN (Power Supply In), connect the AC/DC power adapter.
- When disconnecting the power cable of the DC/AC power adapter from a wall outlet, pull the plug. Do not pull the cable.
- Do not connect this unit or other components to an AC outlet until all connections between components are complete.

Connecting Electrical Power

Using the power adapter to connect the unit to electrical outlet in the figure
Press the power button to power on the Soundbar (LED screen will turn on)
- Make sure to rest the AC/DC adapter flat on a table or the floor. If you place the AC/DC adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the adapter and cause the adapter to malfunction.

Connecting with a TV (Choose only 1 method)

Method 1. Connecting using Optical cable

Connect the DIGITAL AUDIO IN(OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable·
Select “OPT” on LED screen by pressing the “MODE” button on the remote or control panel.
- You must use Soundbar’s remote to power on or control the volume under this connection.
- If no sound or cracking noise, set your TV’s audio output to “PCM”.
- Take the caps off on the OPTICAL jack
- Please disable the TV internal speaker through TV audio setting,select the external speaker.

Method 2. Connecting using Coaxial cable

With the Sound bar and TV turned off, connect the Coaxial cable as shown.
Turn on the TV and soundbar, select “COA” on LED screen by pressing the “MODE” button on the remote or control panel.
- You must use Soundbar’s remote to power on or control the volume under this connection.
- If no sound or cracking noise, set your TV’s audio output to “PCM”. (Refer to TV’s manual)
- Please disable the TV internal speaker through TV audio setting,select the external speaker.

Method 3. Connecting using ARC cable

TV ARC onnection transmits digital audio signals between devices. If your TV have TV ARC connector, using them will provide the best possible audio performance quality.
- Using a Version 1.4 or above of TV ARC cable (not supplied).
- Connect the cable to the TV’s TV ARC out to the Sound bar TV ARC in.
- Turn on the TV and soundbar, select “ARC” on LED screen by pressing the “MODE” button on the remote or control panel.
If our TV is equipped with TV ARC function, you can deliver its sound to the Sound bar via the TV ARC TV out connection. It will not require additional audio connections to the Soundbar. The ARC signal is active when the TV ARC source is selected. The detailed benefits are as follows:
- TV remote control is able to control the power on or off the Soundbar.
- TV remote control is able to control the volume up or down of the Sound bar.

Remarks:

The transmission of digital audio signals between devices is not workable for all the TV brands in the markets because the branded TVs are not cross-brand compatibility to each other.
Use your source device (such as a TV, CD player, or cable tel lite receiver). The audio output mode is set to PCM, or turn on the sound source output.

Good to know for TV setting

Please note almost all the TV audio output is the analog signal and the internal speaker, but the optical cable and coaxial cable is the digital signal, so when you want to hook up the soundbar on your TV through optical or coaxial cable, you must change the TV audio output to digital output(PCM or SPDIF) and external speaker
How to set PCM on your TV
Enter your TV’s settings menu
Select the Audio or sound settings option
Select the audio out or digital out setting
Change setting to PCM(some TVs called SPDIF)
how to disable the TV internal speaker
Enter your TV’s settings menu
Select the Audio or sound settings option
Select the TV speaker
Select the Extenral speaker(or disable the TV speaker)
Please kindly make sure you have changed the TV audio output correctly, if TV still no sound, or output crack sound, or poping sound, please kindly share your TV brand, model number.and order ID with us through service mail: service@wohomeshop.com , so we can guide you to fix the problem.
If you do not know how to set the TV audio to PCM, please kindly refer to your TV manual or call the TV manufacturer for help.

Method 4. Connecting via AUX

WOHOME-S89-28-Inch-
80W-

Use the 3.5mm to RCA audio cable to connect the TV’s stereo RCA(L/R) Audio output socket to the AUX jack of the unit.Or use the 3.5mm to 3.5mm audio cable (not supplied) to connect the TV’s AUX output jack to the AUX jack of the Speaker.
Select ” AUX” on LED screen by pressing the “MODE” button on the remote or control panel.
- If no sound or echo, set your TV’s audio output to external speaker. Press the home or menu button on the TV remote, go to TV setting — sound — TV speaker — select the external speaker (disable the TV speaker), more detail, please refer to TV manual.
- Choose only one connection from above, it depends on your TV’s audio output jack.
- In this model, the TV’s remote control can adjust the volume. (For some TVs, please press home or menu on the remote go to TV setting — Sound — Analog output — select “Variable”)

Connecting an External Device

Optical Cable
Connect DIGITAL AUDIO (OPTICAL) on the Soundbar to the OPTICAL OUT jack of the Source Device using a digital optical cable.
Select “OPT” on LED screen by pressing the “MODE” button on the remote or control panel.
please change your device audio output to PCM and disable the device intenral speaker.
Coaxial Cable
Connect DIGITAL AUDIO (Coaxial ) on the Sound bar to the Coaxial OUT jack of the Source Device using a digital Coaxial cable.
Select “COA” on LED screen by preassing the “MODE” button on the remote or control panel.
please change your device audio output to PCM and disable the device intenral speaker.
ARC cable.
Connect TV ARC on the soundbar to the ARC jack of the source device using a ARC cable.
Select “ARC” on LED screen by pressing the “MODE” button on the remote or control panel.
Please change your device audio output to PCM and disable the device intenral Speaker.
3.5mm to 3.5mm AUX Cable or 3.5mm to RCA cable
Using the 3.5mm to 3.5mm AUX cable or 3.5mm to RCA cable to connect External Device and Soundbar.
Select “AUX” on LED screen by pressing the “MODE” button on the remote or control panel.

Connecting a USB

Connect your USB device to the USB jack on the Soundbar.
Select “USB” on LED screen by pressing the “USB” button on the remote.
Play music files from the USB device through the Soundbar.

Connecting a BT Device

The initial connection

Select “BT” on LED screen by pressing the “BT” button on the remote.
Turn on BT on the BT device. ( see the device’s manual for more information)
Select “WOHOME S89” from the list, connect it. When your BT device is connected, the LED screen will keeping display BT .
Play music files from the device, connected via BT, throught the Soundbar.
- You cannot connect more than one BT device at a time.

Additional BT information

If you hear any break-up while streaming music from your device, move closer to your Soundbar.
BT signal has a range of up to 30 feet if there are no solid obstructions between your Soundbar and source device.
Other wireless devices may interfere with BT range, including wireless video monitors, cordless phones, wireless cameras, etc., moving or turing off these devices may improve BT range.
- Reduce the volume on your device or Soundbar, high volume can damage your hearing.

Soundbar Wall Installation Diagram

Tools & fixings required

Drill fitted with a masonry drill bit
Ruler
Screwdriver
Spirit level
Pencil

Place the soundbar in the desired position and using a spirit level check that the sound bar is level.
Make a light pencil mark on the wall at the top edge of both fixing brackets. The mark should be positioned directly above each bracket. Note the mounting points on the soundbar (one is 100 mm from the end while the other is 100 mm from the other end), so you should use the sound bar as a template to get the right mounting positions.
Place the soundbar away from the work area and then mark two fixing points 7mm below the light pencil marks for the screws. These marks should be 510 mm apart and level. Before drilling, use a spirit level to check that the fixing points marked are level.
If fixing to a solid masonry wall, use a masonry drill bit, drill holes to a depth of approximately 30mm and insert the wall plugs. Insert the screws into the wall plugs and drive home the screws until the heads stand proud of the wall by about 1mm.
If fixing to hollow plaster board walls, use a drill bit suitable for wood and replace the wall plugs with wall anchors appropriate for the application. Locate the fixing points into wall studs and cross braces where possible. Locate the sound bar onto the screw heads and check that the screws are fully engaged into the keyhole mount before releasing your hold.Distance between the holes of two metal brackets

Know Your Remote

Power the remote by inserting 2 pcs of AAA batteries

Power on/Off
Mute
Choose the mode of the BT/USB/ARC/OPT/COAX/AUX
Increasing the total volume
Prev. Song
Play/Pause
Next song
Reducing the total volume
EQ Mode of Music (EQl), Movie(EQ2),News(EQ3)
BT Mode/Long press to disconnect BT
LOOP Playback(USB Mode only)
3D Surround Stereo Sound

Troubleshooting

No Sound

| 1. Please check if the soundbar is consistent with the input mode of Sound Source by following the manual.

2. Press the Volume+ button on the remote or soundbar to volume up.

3. Please check the output devices if the output of sound source is working.

|

Please make sure all the soundbar ports are input ports and all the connected devices are audio output.

No sound when TV is connected with optical.

|

1. Set up the optical output.

2. Set up the audio output format–PCM.

3. Adjust to optical mode, and the Led indicates white lightning.

4. Please check if the optical is connected with TV effectively.

5. Volume up the soundbar.

| Please take out the transparent antidust caps on two sides of optical. One side of optical indicates the white lightning when TV is connected well, and then plug the other side of optical into the optical port of soundbar.

Devices can’t connect with BT

|

1. Select “BT” on LED screen by pressing the “BT” button on the remote.

2. Reboot the cellphone or bluetooth devices, search again.

3. Please make sure the soundbar is disconnected with other BT devices, shut off and try again.

4. Please chesk if there is strong interfering signal around, such as: WIFI, 2.4G; try to use in other space.

5. Please try to use other BT devices to test if the BT device has problem of its own.

|

The BT is only connected with one device, other devices cant search it when it has connected.

The distance of BT is short or on and off

| 1. Please check if there is strong interfering signal around, such as: WIFI, 2.4G; try to use in other space.

2. Reboot the cellphone or BT devices, then reconnect.

3. Please make sure there is no obstacle between the soundbar and BT device in case of blocking the signal.

4. Power off the soundbar and then reboot.

|

The working distance of BT is 10m (empty place).

The remote is not work ing

|

1. Please check if the positive and negative of battery is right. (There is noted on the batterys compartment)

2. Please check if the receiving locati on is blocked beside the LED on soundbar.

3. The working distance of remote is 6-Sm (empty place).

|

Please make sure al l the soundb ar ports are input ports and all the connected devices are audio output.

---|---|---

The sound is low or bad

| 1. Please make sure if the volume of output device is big.

2. Please try to play with other devices to test if the working device has problem of its own.

3. The product is designed for home, it would be much better if the space is moderate.

|

The locat ion of sou ndb ar can affect your experience in some extent.

The sound is inconsistent with the sound of TV|

Please set up and shut off the sound of TV.

|

Check the TVs manual.

BT can’t be connected

| 1. Check if the Sound Bar is connected with the third BT device.

2. Be sure that there are no soli d obstructions between the Sound Bar and source device. (W ithin 30 feet)

3. Press and hold BT button on remote for 3 seconds, and connect it again.

|

LED screen keeping display BT.

Warranty

|

We offer one year warranty and 45 days money back guarantee.

| If there is any problems,please feel free to contact us thr ough serv ice mail: support@wohomeshop.com,

and we will try our best to help you.

No sound or crack sound from streaming video APP

|

Please note the streaming video APP default audio if Dolby or DTS, such as Netflix,Youtube, Amazon prime video, Hulu and HBO, but this soundbar do not support the Dolby and DTS.

|

Please kindly disable the Dolby and DTS on your app.

here is the method for N e tfli x in below:

Step 1, launch the Netflix APP

Step 2, Select the TV show or Movie

Step 3, While your TV show or movie is playing, press the Down arrow on your r e mot e

Step 4, Select Audio&Subtitles,disable th e Dolby

and DTS, save settings

Step 5, play the video to test sound

Kindly n ote the m e thod may differ according to your device, more method, please visit this link: https://help.netflix.com/en/node/372